AMM213TD and AMM240WTD Operation Manual Rev F Aug 2010

Page 1

AUTO - SCANNING WITH DIGITAL CONTROL

LCD COLOR MEDICAL MONITOR

AMM213TD / AMM240WTD

Operation Manual

For future reference, record the serial number of your display

monitor in the space below :

Serial Number

The serial number is located on the back of the monitor

Page 2

AMM213TD/AMM240WTD 1

ENGLISH

back of the monitor

WARNING

The title «WARNING» is used to inform the users of possible causes that could inflict the injury, death, or property

damage to the patients.

CAUTION

The title «CAUTION» is used to inform the users of possible causes that could inflict the patients although it might

not severe enough to cause deaths.

NOTE

The title «NOTE» is used to inform the users of items that

are of importance in terms of installation, operation, or

maintenance of the Equipment although the failure does

not inflict the bodily harm to the patients.

ADVAN INT’L CORP.2010

All other trademarks are the property of their reference owners.

This document is subject to change without notice.

Advan provides this information as reference only. Reference to other vendor’s

products does not imply any recommendation or endorsement.

Revision Control

Date

Description

REV.F 100810

Document number

Page 4

Product Description and Intended Use

AMM213TD/AMM240WTD LCD Monitor is intended to for displaying images from

imaging system.

Please check the following items are present when you unpack the box, and save

the packing materials in case you will need to ship or transport the monitor in future.

• AMM213TD/AMM240WTD LCD Monitor and two video cables (1) HD15

VGA cable* (1) DVI-D cable*

*

•

AC Power cord**

•

AC-Adapter

•

Composite Video BNC Jack Cable and Super Video Cable

•

User Manual and 4pcs VESA screws

*Might be optional item, check with local representative

**Might vary pending on region standard

*

CAUTION

Model No : JMW1150KA2400F04

Part No : PS-52142415001A

ENGLISH

AMM213TD/AMM240WTD 3

Page 5

4

User’s Guide

Warnings and Cautions

Please read this manual and follow its instructions carefully. The words warning,

caution, and note carry special meanings and should be carefully reviewed:

Warning

The personal safety of the patient or physician may be

involved. Disregarding this information could result in

injury to the patient or physician.

Caution

Special service procedures or precautions must be

followed to avoid damaging the instrument.

Note

Special information to make maintenance easier or important

information more clear.

An exclamation mark within a triangle is intended to alert the

user to the presence of important operating and maintenance

instructions in the literature accompanying the product.

A lightning bolt within a triangle is intended to warn of the

presence of hazardous voltage. Refer all service to authorized

personnel.

Warning

TO AVOID POTENTIAL SERIOUS INJURY TO THE USER

AND THE PATIENT AND/OR DAMAGE TO THIS DEVICE,

THE USER MUST :

Warranty is void if any of these warnings are disregarded.

ADVAN Int’l Corp accepts full responsibility for the effects on safety, reliability, and

performance of the equipment only if:

• Re-adjustments, modifications, and/or repairs are carried out exclusively

by ADVAN Int’l Corp.

• The electrical installation of the relevant operating room complies with the

applicable IEC and CE requirements.

Warning

Federal law (United States of America) restricts this

device to use by, or on order of a physician.

The ADVAN Int’l Corp AMM213TD/AMM240WTD monitor has been tested under UL

60601-1 standard and UL listed for Medical application.

ADVAN Int’l Corp reserves the right to make improvements in the product(s)

described herein. Product(s), therefore, may not agree in detail to the published

design or specifications. All specifications are subject to change without notice.

Please contact ADVAN Int’l Corp directly or phone your local ADVAN Int’l Corp sales

representative or agent for information on changes and new products.

Page 6

1. Read the operating manual thoroughly and be familiar with its contents prior to using

this equipment.

2. Carefully unpack the unit and check if any damage occurred during shipment.

3. Should any solid object or liquid fall into the panel, unplug the unit and have it checked

4. Uplug the unit if it is not to be used for an extended period of time. To disconnect the

cord, pull it out by the plug. Never pull the cord itself.

6. Test this equipment prior to a medical procedure. This monitor was fully tested at the

factory before shipment.

7. Avoid removing covers on control unit to avoid electric shock.

manual.

9. Pay close attention to the care, cleaning instructions in this manual. A deviation may

cause damage (refer to the Cleaning section).

10. DO NOT STERILIZE MONITOR.

11. Read the entire instruction manual before assembling or connecting the camera.

12. Do not place the monitor or any other heavy object on the power cord. Damage to the

13. Monitor with power supply is suitable for use in patient environment.

14. DO NOT stack more than 8 boxes high

15. The unit should not be used adjacent to or stacked with other equipment and that if

adjacent or stacked use is necessary, the unit should be observed to verify normal

operation in the configuration in which it will be used.

16. The use of the accessory or cable with the unit other than those specified may result

in increased EMISSIONS or decreased IMMUNITY of the unit.

This equipment has been tested and found to comply with the limits for medical devices in

IEC 601-1-2:2003. These limits are designed to provide reasonable protection against harmful interference in a typical medical installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to other devices, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving device.

- Increase the separation between the equipment.

- Connect the equipment into an outlet on a circuit different from that to which the other

device(s) are connected.

NOTICES TO USER

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING

expressly approved by the party responsible for compliance could void the user’s authority

to operate the equipment. The user could lose the authority to operate this equipment if an

ENGLISH

Warnings

AMM213TD/AMM240WTD 5

Page 7

6

User’s Guide

Cautions

1. The AC Adapter must be plugged into a Grounded power outlet.

2. Use only the proprietary AMM213TD/AMM240WTD power supply for the

AMM213TD/AMM240WTD monitor. Make a proper connection by ensuring that the

shrink tubing completely secures the connection between the DC power cord and the

extension cord.

3. Turn power off when unit is not in use.

4. Never operate the unit right after having transported from a cold location directly to a

warm location.

5. Do not expose the monitor to moisture or directly apply liquid cleaners directly to the

screen. Spray the cleaning solution into a soft cloth and clean gently.

6. Handle the monitor with care. Do not strike or scratch the screen.

7. Do not block the monitor cooling vents. The monitor is cooled by natural convection

and has no fan.

8. Do not force the monitor past 28 degrees of vertical when adjusting the screen

position. (For monitors equipped with stands only.)

9. Remove the power module and connection when transporting the unit.

10. Save the original carton and associated packing material. They will be useful should

you have to transport or ship the unit.

11. Allow adequate air circulation to prevent internal heat buildup.

12. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains,

draperies) that may block the ventilation slots.

13. Do not install the unit near sunlight, excessive dust, mechanical vibration or shock.

14. The unit is designed for operation in a horizontal position. Never operate the unit in

a vertical position.

15. Keep the unit away from equipment with strong magnets (i.e. a large loudspeaker.)

16. Do not expose the monitor to moisture or excessive dust.

17. Equipment with SIP/SOP connectors should either comply with IEC 60601-1 and/or

IEC 60601-1-1 harmonized national standard or the combination should be evaluated.

Do not touch the patient with signal input or output connectors.

18. Use only a hospital grade power supply cord.

19. This equipment has been tested and found to comply with the limit for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable generate uses and can radiate radio frequency energy, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in

a particular installation, which can be detemined by turing the equipment off and on,

the user is encourage to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving device.

• Increase the separation distance between the equipment.

• Connect the equipment to an outlet on a circuit different from that to which the

other device(s) are connected.

• Consult the manufacturer or field service technican for help.

20. Grounding reliability can only be achieved when the equipment is connected to an

equipment receptacle labeled “Hospital Only” or “Hospital Grade.”

Note

To connect to an international power supply, use a an attachment plug

appropriate for the power outlet.

Note

Refer to the “Electromagnetic Compatibility” (EMC) section of this manual to

ensure EMC. The AMM213TD/AMM240WTD must be installed and operated

according to the EMC information provided in this manual.

Page 8

Dangerous: High Voltage

Direct Current

Serial Number

Top – Bottom

Fragile

Do not get wet

Consult accompanying documents.

Indicates proof of conformity to applicable European Economic

Community Council directives and to harmonized standards

published in the official journal of the European Communities.

Authorized Representative in Europe

Indicates protective earth ground.

For indoor use only.

Medical Equipment is in accordance with UL 60601-1 and CAN/

CSA C22.2 No. 601.1 in regards to electric shock, fire hazards,

51LJ

Medical Equipment and mechanical hazards.

E215822

Tested to comply with FCC Class B standards.

DC power control switch

ENGLISH

Symbol Definitions

AMM213TD/AMM240WTD 7

Page 9

8

User’s Guide

EU Declaration of Conformity for Medical Applications

A Declaration of Conformity has been filed for this product. A sample

of this document may be found in the addendum which accompanied this manual. For a copy of the Declaration of Conformity document, please contact ADVAN Int’l Corp. and request for AMM213TD/

AMM240WTD DOC.

Prepare for Unpack

Before you unpack your monitor, prepare a suitable workspace. You

need a stable and level surface near a grounded wall outlet in an area

which is relatively free of glare from sunlight or other sources of bright

light. The monitor is cooled by natural convection (it has no fan).

For optimum performance, do not block the cooling vents.

While unpacking the monitor, inspect it and other package contents

for shipping damage that could cause a fire or shock hazard. Immediately report any shipping damage to the carrier or transportation

company and contact customer service for monitor in the future or in

case of return.

After you unpack the monitor, make sure the following items are included

• Monitor with video cable

• AC adapter with cable

CAUTION: AC Adapter must be plugged into Grounded a power outlet

CAUTION : AC adapter

Model No: JMW1150KA2400F04

Part No: PS-52142415001A

• This operations manual

Note: Your system provider may offer alternative cords or cables

depending on the installation requirement and local geography issues.

Page 10

·

Avoid placing the monitor, or any other heavy object, on the power cord

to prevent fire or electrical shock from damage to the power cord.

·

Do not expose the monitor to rain, excessive moisture, or dust to avoid

fire or shock hazard.

·

Do not cover the slots or openings of the monitor for proper heat

dissipation. Always put the monitor in a place where there is adequate

ventilation.

·

Avoid placing the monitor against a bright background or where sunlight

or other light sources may reflect on the area of the monitor. Place the monitor

just below eye level.

·

Handle with care when transporting the monitor.

·

Refrain from giving the shock or scratch to the screen, as screen is

fragile.

CLEANING YOUR MONITOR

No specific liquid or chemical necessary when cleaning this LCD monitor

However, we suggest to clean the monitor with non-abrasive cloths and cleaning

solutions used in hospitals to clean similar equipment. We recommend using 70%

Isopropyl alcohol for the screen surface and warm water and a mild detergent for all

other surfaces. Other acceptable cleaning agents are listed below:

• 70% isopropyl alcohol

• Cidex (2.4% glutaraldehyde solution)

• 0.5% Chlorhexidine in 70% isopropyl alcohol

To clean the screen, do not spray liquid cleaners directly on to the unit. Stand away

Form the monitor and spray cleaning solution onto a cloth. Without applying excessive pressure, clean the screen with the slightly dampened rag.

ENGLISH

SAFETY PRECAUTION

AMM213TD/AMM240WTD 9

Page 11

10

User’s Guide

POWER MANAGEMENT FUNCTION

The monitor is equipped with the power management function which automatically

reduce the power consumption when not in use in three power level modes.

•

Stand-by Mode

The monitor goes into stand-by mode when the horizontal sync signal is off for

about 10 seconds. In this mode, the screen goes off and the power LED blinks

for 1 seconds On and 1 second Off. The screen is displayed after the horizontal

sync signal is restored.

•

Suspend Mode

The monitor goes into suspend mode when the vertical sync signal is off for

about 10 seconds. The power consumption during this is 27 W. In this mode,

the screen goes off and the power LED blinks for 1 seconds On and 1 second

Off. The screen is displayed after the vertical sync signal is restored.

•

Off Mode

The monitor goes into power-off mode when the vertical and horizontal sync

signals are off for about 10 seconds. In this mode, the screen goes off and the

power LED blinks for 1 seconds On and 1 second Off. The screen is displayed

after the vertical and horizontal sync signals are restored.

Power Management System

The AMM213TD/AMM240WTD Medical Monitor power management proposal.

Provides four phases of power-saving modes by detecting the horizontal sync

signal as shown in the table below.

State

Normal

Operation

DPMS

Standby

DPMS

Suspend

DPMS Off

Horizontal Sync

Active

Inactive

Active

Inactive

Vertical Sync

Active

Active

Inactive

Inactive

Video

Active

Blanked

Blanked

Blanked

Power Indicator

Green

Green Flashing (1

sec. Interval)

Green Flashing (1

sec. Interval)

Green Flashing (1

sec. Interval)

Power

Consumption

100W

27W

27W

27W

When the monitor is power saving mode or detects an incorrect timing, the screen

will be blank and power LED indicator will blink.

Page 12

PRESET MODES

ENGLISH

AMM213TD/AMM240WTD 11

DVI and VGA input signal formats

Resolution

Horizontal

frequency

( KHz )

Vertical

frequency

( Hz )

Pixel clock

( MHz )

640 x 350 @70Hz

31.469

70.087

25.175

640 x 480 @60Hz

31.469

59.940

25.175

640 x 480 @75Hz

37.500

75.000

31.500

640 x 480 @85Hz *1

43.269

85.008

36.000

800 x 600 @56Hz

35.156

56.250

36.000

800 x 600 @60Hz

37.879

60.317

40.000

800 x 600 @72Hz *1

48.077

72.188

50.000

800 x 600 @75Hz

46.875

75.000

49.500

800 x 600 @85Hz *1

53.674

85.061

56.250

1024 x 768 @60Hz

48.363

60.004

65.000

1024 x 768 @70Hz

56.476

70.069

75.000

1024 x 768 @75Hz

60.023

75.029

78.750

1024 x 768 @85Hz *1

68.677

84.997

94.500

1152 x 864 @60Hz

54.348

60.053

80.000

1152 x 864 @70Hz

63.955

70.016

94.200

1152 x 864 @75Hz

67.500

75.000

108.000

1280 x 1024 @60Hz

63.974

60.013

108.500

1280 x 1024 @75Hz *1

79.976

75.025

135.000

1600 x 1200 @60Hz

75.000

60.000

162.000

1920 x 1200 @60Hz *2

74.099

59.999

154.125

*1 available for AMM213TD

*2 available for AMM240WTD

Page 13

12

User’s Guide

Video Signals

Format

DVI

C-Video

S-Video

NTSC *1

O

O

PAL *2

O

O

480/59.94i

VGA

O

SDI1

SDI2

O

O

480/59.94p

576/50i

O

O

O

Component / RGB

Y/Pb/Pr

RGB

O

O

O

O

O

O

O

O

576/50p

O

O

720/50p

O

O

O

O

O

O

720/59.94p

O

O

O

O

O

O

720/60p

O

O

O

O

O

O

1080/23.98psf

O

O

O

O

O

1080/24psf

O

O

O

O

O

1080/23.98p

O

O

O

O

O

1080/24p

O

O

O

O

O

1080/25p

O

O

O

O

O

O

1080/29.97p

O

O

O

O

O

O

1080/30p

O

O

O

O

O

O

1080/50i

O

O

O

O

O

O

1080/59.94i

O

O

O

O

O

O

1080/60i

O

O

O

O

O

O

1080/59.94p

O

O

1080/60p

O

O

*1 NTSC-M, NTSC-433

*2 PAL-BDGHI, PAL-M, PAL-N, PAL-60

Page 14

PIP / POP / PBP function

ENGLISH

AMM213TD/AMM240WTD 13

The following combination options are available to you:

VGA

DVI

SDI1

SDI2

C-Video

S-Video

Component

/ RGBs

VGA

O

O

O

O

O

O

O

DVI

O

O

O

O

O

O

O

O

SDI1

O

O

O

O

O

O

O

SDI2

O

O

O

O

O

O

O

C-Video

O

O

O

O

O

O

O

S-Video

O

O

O

O

O

O

O

O

Component /

RGBs

O

O

O

O

O

O

O

O

O

O

O

O

O

O

Main

SOG

PIP

SOG

Page 15

14

User’s Guide

DDC

To make your installation easier, the monitor is able to Plug and Play with your

system if your system also supports DDC protocol. The DDC (Display Data

Channel) is a communication protocol through which the monitor automatically

informs the host system about its capabilities, for example, supported resolutions

and corresponding timing. The monitor supports DDC1 and DDC2B standard.

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1. Use the supplied video cable (DVI, VGA, S-Video, C-Video) then connect to the

host system accordingly.

2. Connect the DC power to the DC power connector on the monitor.

3. Connect one end of AC power cord into the AC Adapter and the other end to AC

power outlet.

4. Then turn the host system on and then the monitor.

5. If the monitor still does not function properly, please refer to the troubleshooting

section to diagnose the problem.

S - Video

DVI

VGA

SDI IN

IN

OUT

DC Power

C - Video /

SOG

RGB / Component

SDI OUT

Page 16

ENGLISH

CONNECTING the POWER CORD

AMM213TD/AMM240WTD 15

* C

 heck first to make sure that the power cord you use is the correct type required

for your area.

* T his monitor has an universal AC adapter that allows operation in either

AC 100 - 240 V ac voltage area. No user-adjustment is required.

* Plug one end of the power cord to the AC adapter, plug another end to a proper

AC outlet.

The cord set should have the appropriate safety approvals for the country in which

the equipment will be installed and marked HAR.

For 120 volt Applications, use only UL Listed deachable power cord with NEMA

configuration 5-15P type (parallel blades) plug cap. For 240 volt applications use

only UL Listed Detachable power supply cord with NEMA configuration 6-15P type

(tandem blades) plug cap.

Hospital-grade

power cord

Extension power cord (optional)

Manufacturer: Bridgepower

Part No: CB-47D2004P57MF (15ft) or

CB-47D2022P86MF (75ft)

Power Supply

Model No: JMW1150KA2400F04

Part No: PS-52142415001A

AMM213TD/

AMM240WTD

Page 17

16

User’s Guide

User Functions / Messages

Key Name and Function

Power LED : Lights up to indicate the power is turned ON.

Power Switch : To power ON or OFF the monitor.

Rotary switch : With the OSD menu activated, increases the value of the selected

(Ture Right)

parameter or moves rightward in OSD menu.

Rotary switch : With the OSD menu activated, increases the value of the selected

(Ture Left)

parameter or moves leftward in OSD menu.

PIP Switch : To enable or disable Picture In Picture function.

PBP Switch : To enable or disable Picture By Picture function.

POP Switch : To enable or disable Picture On Picture function.

Adjust Switch : To activate or deactivate image adjustment in sub screen of PIP,

PBP, POP mode.

Locker Switch : To turn ON or OFF the system.

How to access the menu

1. Push the “Knob” button to activate the OSD menu.

2. Able to turn left or right the button to select those icons. The icon will be

highlighted when is selected.

3. Push the “knob” button to go into the another OSD menu.

4. Turn left or right “Knob” button to increase or decrease the number of selected

function.

5. In order to exit from the OSD menu in a different layer, then choose the “Exit

option”. In case of long pushing and holding the button around two or three

seconds, then it will completely out from the menu regardless wherever you are.

6. Turn the “Knob” button in a fast way to the left or right, while the menu is not

activated, then input signal menu will turns up with “V” mark which is chosen

current available input signal. You can switch to another input signal source by

turning the knob slowly then select the target source by pushing the knob.

Page 18

AMM213TD/AMM240WTD 17

ENGLISH

OSD Section

Main Menu

Chromatic

Adjust Color Temp, Gamma

Visual

Adjust Brightness, Contrast, Phase, Chroma,

Sharpness-H, Sharpness-V

Setting

Adjust Scale Mode, Color Space, Mirror, Freeze Frame,

Zoom / Pan, PIP, POP, PBP

Advanced

Adjust OSD Position Control, Screen Control, DPMS, Auto

Source Select, Smart Select, Restore Factory, Key Lock

Information

Adjust Custom Entry, SN, Run Time, Input Format

Exit

Exit the menu

Page 19

18

User’s Guide

OSD Section

Chromatic

Color Temp

Change the color temperature - D65, D93, S1, S2

Gamma

Change the gamma value - 1.8, 1.9, 1.95, 2.1, 2.1S, 2.2, 2.3,

2.4, 2.4S, S0, Radio graph

Exit

Exit the menu

Visual

Brightness

Adjust the brightness of panel (Range 0 - 100)

Contrast

Adjust the contrast of video (Range 0 - 100)

Phase

Adjust the phase of video (Range 0 - 100)

*available for C and S - video

Chroma

Adjust the chroma of video (Range 0 - 100)

*available for C and S - video

Sharpness-H

Set the sharpness of horizontal image (Range 0 - 100)

Sharpness-V

Set the sharpness of vertical image (Range 0 - 100)

Exit

Exit the menu

Page 20

AMM213TD/AMM240WTD 19

ENGLISH

OSD Section

Setting

Scale Mode

Change the scale mode - Fill all, One to One,

Vertical - fill, Horizontal - fill, Fill aspect ratio

Color Space

Change color space between RGB and YPbPr

*available for Component and RGBS

Mirror

Off / On mirror image

Freeze Frame

Off / On freeze frame

Zoom / Pan

Enable zoom - in and pan function

PIP

Enable PIP (Picture In Picture) function

POP

Enable POP (Picture On Picture) function

PBP

Enable PBP (Picture By Picture) function

Exit

Exit the menu

Page 21

20

User’s Guide

OSD Section

Sub menu of PIP

Mode

PIP Mode ON / Off

Source

PIP sub screen source - SDI1,2, C-Video, S-Video,

Component, VGA, DVI, SOG

Position

PIP sub screen position - Top L, Top R, Bottom L, Bottom R

Size

PIP sub screen size - Small, Medium, Large

Blending

PIP sub screen blending (Range 0 - 100)

Swap

PIP sub screen swap

Exit

Exit the menu

Sub menu of PBP

Mode

PBP Mode ON / Off

Source

PBP sub screen source - SDI1,2, C-Video, S-Video,

Component, VGA, DVI, SOG

Swap

PBP sub screen swap

Exit

Exit the menu

Page 22

AMM213TD/AMM240WTD 21

ENGLISH

OSD Section

Sub menu of POP

Mode

POP Mode ON / Off

Source

POP sub screen source - SDI1,2, C-Video, S-Video,

Component, VGA, DVI, SOG

Position

POP sub screen position - Top L, Top R, Bottom L, Bottom R

Size

POP sub screen size - Small, Medium, Large, Full

Blending

POP sub screen blending (Range 0 - 100)

Swap

POP sub screen swap

Exit

Exit the menu

Page 23

22

User’s Guide

OSD Section

Advanced

OSD Position

Change the OSD menu - Position, Background,

Control

OSD time out, Language

Screen Control

Control and adjust H and V position, Freqency, Phase

Noise Reduction, Motion Offset

DPMS

Change the DPMS

Auto Source

Adjust Auto Source Select between on and off

Select

Smart Select

Enable / Disable smart select sub menu

Restore Factory Changes the all OSD value to factory outgoing status

Key Lock

Set to key lock mode

Exit

Exit the menu

Page 24

OSD Section

Sub menu of OSD Control

H-position

Adjust OSD H - position (Range 0 - 100)

V-position

Adjust OSD V - position (Range 0 - 100)

Back ground

Adjust transparency of OSD back ground (Range 0 - 100)

OSD Time out

Adjust OSD time out - 5s, 10s, 15s, 20s, 1m, 2m

Language

OSD language - English, Japanese, Chinese, Korean,

French, German

Exit

Exit the menu

Sub menu of Screen Control

H-position

Adjust screen H - position (Range 0 - 100)

*available for VGA

V-position

Adjust screen V - position (Range 0 - 100)

*available for VGA

Frequency

Adjust frequency (Range 0 - 100)

*available for VGA

Phase

Adjust phase (Range 0 - 100)

*available for VGA

Noise

Noise reduction (Range 0 - 100)

Reduction

*available for Component, C-Video and S-Video

Motion Offset

Motion offset (Range 0 - 15)

*available for Component, C-Video and S-Video

Exit

Exit the menu

ENGLISH

AMM213TD/AMM240WTD 23

Page 25

24

User’s Guide

OSD Section

Information

Custom Entry

Change the user or monitor’s name

SN

Display the serial number

Run Time

Display the total run time

Input Format

Display the current input resolution and vertical frequency

Exit

Exit the menu