AMM215MWTD Operation Manual Rev A

AMM215MWTD 1 ENGLISH

back of the monitor

WARNING The title «WARNING» is used to inform the users of possible causes that could inflict the injury, death, or property damage to the patients.

CAUTION The title «CAUTION» is used to inform the users of possible causes that could inflict the patients although it might not severe enough to cause deaths.

NOTE The title «NOTE» is used to inform the users of items that are of importance in terms of installation, operation, or maintenance of the Equipment although the failure does not inflict the bodily harm to the patients.

ADVAN INT’L CORP.2013 All other trademarks are the property of their reference owners. This document is subject to change without notice. Advan provides this information as reference only. Reference to other vendor’s products does not imply any recommendation or endorsement. Revision Control

Document Number Rev. A

2 User’s Guide TABLE OF CONTENTS Product Description and Intended Use... 3 Warnings and Cautions... 4 Symbol Explanations... 7 EU Declaration of Conformity for Medical Applications... 8 Safety Precaution... 9 Cleaning Your Monitor... 9 Recommendation to Use more than One Unit... 9 On Burn-in... 9 Power Management Function... 10 Preset Modes... 11 Video Signals... 12 PIP / POP / PBP function... 13 DDC... 14 Installation... 14 Connecting the Power Cord... 15 User Function / Messages... 16 OSD Section... 17 Troubleshooting... 25 Specification of (AMM215MWTD)... 26 Classification... 27 Electromagnetic Compatibility... 28 Dimension Drawing (mm) of AC Adapter... 30 Dimension Drawing (mm) of AMM215MWTD... 31 Connectors... 32 Description of Warranty... 33 Touchscreen User’s Manual... 37 Accessory Item List... 39

Product Description and Intended Use Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. • AMM215MWTD LCD Monitor(the equipment that displays information, graphic data, image and video on its LCD screen) and two video cables (1) HD15 VGA cable (1) DVI-I cable

•

AC Power cord*

•

AC-Adapter

CAUTION Model No : JMW1100KB1300F02

•

USB Cable**

•

User Manual, Quick Reference Guide and 4pcs VESA screws

Cable Cover

*Might vary pending on region standard **Only available for touch models

ENGLISH

AMM215MWTD 3

4

User’s Guide

Warnings and Cautions

Please read this manual and follow its instructions carefully. The words warning, caution, and note carry special meanings and should be carefully reviewed:

Warning

The personal safety of the patient or physician may be involved. Disregarding this information could result in injury to the patient or physician.

Caution

Special service procedures or precautions must be followed to avoid damaging the instrument.

Note

Special information to make maintenance easier or important information more clear. An exclamation mark within a triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the product. A lightning bolt within a triangle is intended to warn of the presence of hazardous voltage. Refer all service to authorized personnel.

Warning

TO AVOID POTENTIAL SERIOUS INJURY TO THE USER AND THE PATIENT AND/OR DAMAGE TO THIS DEVICE, THE USER MUST :

Warranty is void if any of these warnings are disregarded. ADVAN Int’l Corp accepts full responsibility for the effects on safety, reliability, and performance of the equipment only if: • Re-adjustments, modifications, and/or repairs are carried out exclusively by ADVAN Int’l Corp. • The electrical installation of the relevant operating room complies with the applicable IEC and CE requirements. Warning

Federal law (United States of America) restricts this device to use by, or on order of a physician.

The ADVAN Int’l Corp AMM215MWTD monitor has been tested under UL 60601-1 standard and UL listed for Medical application. ADVAN Int’l Corp reserves the right to make improvements in the product(s) described herein. Product(s), therefore, may not agree in detail to the published design or specifications. All specifications are subject to change without notice. Please contact ADVAN Int’l Corp directly or phone your local ADVAN Int’l Corp sales representative or agent for information on changes and new products.

1. Read the operating manual thoroughly and be familiar with its contents prior to using this equipment. 2. Carefully unpack the unit and check if any damage occurred during shipment. 3. Should any solid object or liquid fall into the panel, unplug the unit and have it checked by qualified personnel before operating it any further. 4. Uplug the unit if it is not to be used for an extended period of time. To disconnect the cord, pull it out by the plug. Never pull the cord itself. 5. Be a qualified physician, having complete knowledge of the use of this equipment. 6. Test this equipment prior to a medical procedure. This monitor was fully tested at the factory before shipment. 7. Avoid removing covers on control unit to avoid electric shock. 8. Attempt no internal repairs or adjustments not specifically detailed in this operating manual. 9. Pay close attention to the care, cleaning instructions in this manual. A deviation may cause damage (refer to the Cleaning section). 10. DO NOT STERILIZE MONITOR. 11. Read the entire instruction manual before assembling or connecting the camera. 12. Do not place the monitor or any other heavy object on the power cord. Damage to the cable can cause fire or electirc shock. 13. Monitor with power supply is suitable for use in patient environment. 14. DO NOT stack more than 3 boxes high This equipment has been tested and found to comply with the limits for medical devices in IEC 60601-1-2:2003. These limits are designed to provide reasonable protection against harmful interference in a typical medical installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to other devices, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving device. - Increase the separation between the equipment. - Connect the equipment into an outlet on a circuit different from that to which the other device(s) are connected. - Consult the manufacturer or field service technician for help.

NOTICES TO USER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING This equipement generates or uses radio frequency energy. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

ENGLISH

Warnings

AMM215MWTD 5

6

User’s Guide

Cautions

1. The AC Adapter must be plugged into a Grounded power outlet. 2. Use only the proprietary AMM215MWTD power supply for the AMM215MWTD monitor. Make a proper connection by ensuring that the shrink tubing completely secures the connection between the DC power cord and the extension cord. 3. Turn power off when unit is not in use. 4. Never operate the unit right after having transported from a cold location directly to a warm location. 5. Do not expose the monitor to moisture or directly apply liquid cleaners directly to the screen. Spray the cleaning solution into a soft cloth and clean gently. 6. Handle the monitor with care. Do not strike or scratch the screen. 7. Do not block the monitor cooling vents. The monitor is cooled by natural convection and has no fan. 8. Do not force the monitor past 28 degrees of vertical when adjusting the screen position. (For monitors equipped with stands only.) 9. Remove the power module and connection when transporting the unit. 10. Save the original carton and associated packing material. They will be useful should you have to transport or ship the unit. 11. Allow adequate air circulation to prevent internal heat buildup. 12. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots. 13. Do not install the unit near sunlight, excessive dust, mechanical vibration or shock. 14. The unit is designed for operation in a horizontal position. Never operate the unit in a vertical position. 15. Keep the unit away from equipment with strong magnets (i.e. a large loudspeaker.) 16. Do not expose the monitor to moisture or excessive dust. 17. Equipment with SIP/SOP connectors should either comply with IEC 60601-1 and/or IEC 60601-1-1 harmonized national standard or the combination should be evaluated. Do not touch the patient with signal input or output connectors. 18. Use only a hospital grade power supply cord. 19. This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable generate uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, which can be detemined by turing the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving device. • Increase the separation distance between the equipment. • Connect the equipment to an outlet on a circuit different from that to which the other device(s) are connected. • Consult the manufacturer or field service technican for help. 20. Grounding reliability can only be achieved when the equipment is connected to an equipment receptacle labeled “Hospital Only” or “Hospital Grade.” Note

To connect to an international power supply, use a an attachment plug appropriate for the power outlet.

Note

Refer to the “Electromagnetic Compatibility” (EMC) section of this manual to ensure EMC. The AMM215MWTD must be installed and operated according to the EMC information provided in this manual.

Dangerous: High Voltage

Indicates protective earth ground.

Direct Current

For indoor use only.

Serial Number

Tested to comply with FCC Class B standards.

This way up

DC power control switch

Fragile, handle with care

Tested to comply with Japan VCCI certification

Stacking limit by number

Tested to comply with China CCC certification

Keep dry

China RoHS symbol. Number indicates EFUP(Environmental Friendly Use Period) from the date of manufacturing.

Recyclable

Medical Equipment is in accordance with UL 60601-1 and 51LJ CAN/CSA C22.2 No. 601.1 Medical Equipment E215822 in regards to electric shock, fire hazards, and mechanical hazards

See accompanying document

Tested to comply with IP (ingression protection) Rating

Indicates proof of conformity to applicable European EconomicCommunity Council directives and to harmonized standards published in the official journal of the European Communities.

WEEE symbol for the recyclable product. Please do not throw the product with this symbol in the bin.

Authorized Representative in Europe

Manufacturer

Date of Manufacture

ENGLISH

Symbol Definitions

AMM215MWTD 7

8

User’s Guide

EU Declaration of Conformity for Medical Applications A Declaration of Conformity has been filed for this product. A sample of this document may be found in the addendum which accompanied this manual. For a copy of the Declaration of Conformity document, please contact ADVAN Int’l Corp. and request for AMM215MWTD DOC.

Prepare for Unpack Before you unpack your monitor, prepare a suitable workspace. You need a stable and level surface near a grounded wall outlet in an area which is relatively free of glare from sunlight or other sources of bright light. The monitor is cooled by natural convection (it has no fan). For optimum performance, do not block the cooling vents. While unpacking the monitor, inspect it and other package contents for shipping damage that could cause a fire or shock hazard. Immediately report any shipping damage to the carrier or transportation company and contact customer service for monitor in the future or in case of return. After you unpack the monitor, make sure the following items are included • Monitor with video cable • AC adapter with cable

CAUTION: AC Adapter must be plugged into Grounded a power outlet

CAUTION : AC adapter Model No: JMW1100KB1300F02

• This operations manual

Note: Your system provider may offer alternative cords or cables depending on the installation requirement and local geography issues.

· · ·

·

· ·

Avoid placing the monitor, or any other heavy object, on the power cord to prevent fire or electrical shock from damage to the power cord. Do not expose the monitor to rain, excessive moisture, or dust to avoid fire or shock hazard. Do not cover the slots or openings of the monitor for proper heat dissipation. Always put the monitor in a place where there is adequate ventilation. Avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the area of the monitor. Place the monitor just below eye level. Handle with care when transporting the monitor. Refrain from giving the shock or scratch to the screen, as screen is fragile.

CLEANING YOUR MONITOR No specific liquid or chemical necessary when cleaning this LCD monitor However, we suggest to clean the monitor with non-abrasive cloths and cleaning solutions used in hospitals to clean similar equipment. We recommend using 70% Isopropyl alcohol for the screen surface and warm water and a mild detergent for all other surfaces. Other acceptable cleaning agents are listed below: • 70% isopropyl alcohol • Cidex (2.4% glutaraldehyde solution) • 0.5% Chlorhexidine in 70% isopropyl alcohol To clean the screen, do not spray liquid cleaners directly on to the unit. Stand away Form the monitor and spray cleaning solution onto a cloth. Without applying excessive pressure, clean the screen with the slightly dampened rag.

Recommendation to Use more than One Unit As unforeseen situation can occasionally occur for the monitor, when the display is used for safety control of human, equipments or unstable picture, or for emergencies, we strongly recommend you use more than one unit or prepare a spare unit.

On Burn-in Permanent burn-in may occur from the followings: • Displaying color bar or static images repeately or for a long period of time. • Using the unit repeatedly in a high temperature/ high humidity environment • Displaying an image smaller than the monitor continuously. To reduce the risk of burn- in, we recommend turning off the power of the unit, and reducing the brightness when the unit is not in use.

ENGLISH

SAFETY PRECAUTION

AMM215MWTD 9

10

User’s Guide

POWER MANAGEMENT FUNCTION The monitor is equipped with the power management function which automatically reduce the power consumption when not in use in three power level modes. •

Stand-by Mode

The monitor goes into stand-by mode when the horizontal sync signal is off for about 10 seconds. In this mode, the screen goes off and the power LED blinks for 1 seconds On and 1 second Off. The screen is displayed after the horizontal sync signal is restored. •

Suspend Mode

The monitor goes into suspend mode when the vertical sync signal is off for about 10 seconds. The power consumption during this is 8 W. In this mode, the screen goes off and the power LED blinks for 1 seconds On and 1 second Off. The screen is displayed after the vertical sync signal is restored. •

Off Mode

The monitor goes into power-off mode when the vertical and horizontal sync signals are off for about 10 seconds. In this mode, the screen goes off and the power LED blinks for 1 seconds On and 1 second Off. The screen is displayed after the vertical and horizontal sync signals are restored. Power Management System The AMM215MWTD Medical Monitor power management proposal. Provides four phases of power-saving modes by detecting the horizontal sync signal as shown in the table below.

State

Normal Operation

DPMS Standby

DPMS Suspend

DPMS Off

Horizontal Sync

Active

Inactive

Active

Inactive

Vertical Sync

Active

Active

Inactive

Inactive

Video

Active

Blanked

Blanked

Blanked

Power Indicator

Green

Green Flashing (1 sec. Interval)

Green Flashing (1 sec. Interval)

Green Flashing (1 sec. Interval)

Power Consumption

43 W

8W

8W

8W

When the monitor is power saving mode or detects an incorrect timing, the screen will be blank and power LED indicator will blink.

AMM215MWTD 11 ENGLISH

PRESET MODES DVI and VGA input signal formats Horizontal frequency ( KHz )

Vertical frequency ( Hz )

Pixel clock ( MHz )

640 x 350 @70Hz

31.469

70.087

25.175

640 x 480 @60Hz

31.469

59.940

25.175

640 x 480 @75Hz

37.500

75.000

31.500

800 x 600 @56Hz

35.156

56.250

36.000

800 x 600 @60Hz

37.879

60.317

40.000

800 x 600 @75Hz

46.875

75.000

49.500

1024 x 768 @60Hz

48.363

60.004

65.000

1024 x 768 @70Hz

56.476

70.069

75.000

1024 x 768 @75Hz

60.023

75.029

78.750

1152 x 864 @60Hz

54.348

60.053

80.000

1152 x 864 @70Hz

63.955

70.016

94.200

1152 x 864 @75Hz

67.500

75.000

108.000

1280 x 1024 @60Hz

63.981

60.020

108.000

1680 x 1050 @60Hz

64.742

59.946

119.125

1680 x 1050 @60Hz

65.160

59.944

147.000

1600 x 1200 @60Hz

74.077

59.981

130.375

1920 x 1080@60Hz

67.500

60.00

148.500

Resolution

PIP / POP / PBP function* The following combination options are available to you:

PIP

DVI 1

DVI 2

VGA

DVI 1

x

x

O

DVI 2

x

x

O

VGA

O

O

x

Main

*Not available for touch models

ENGLISH

AMM215MWTD 13

14

User’s Guide

DDC

To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing. The monitor supports DDC1 and DDC2B standard.

INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. Use the supplied cable (DVI, VGA, USB*) then connect to the host system accordingly. 2. Connect the DC power to the DC power connector on the monitor. 3. Connect one end of AC power cord into the AC Adapter and the other end to AC power outlet. 4. Then turn the host system on and then the monitor. 5. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

DC Power

*Only available for touch models

DVI

VGA

USB*

ENGLISH

CONNECTING the POWER CORD

AMM215MWTD 15

* Check first to make sure that the power cord you use is the correct type required for your area. * T his monitor has an universal AC adapter that allows operation in either AC 100 - 240 V ac voltage area. No user-adjustment is required. * Plug one end of the power cord to the AC adapter, plug another end to a proper AC outlet. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed and marked HAR.

For 120 volt Applications, use only UL Listed deachable power cord with NEMA configuration 5-15P type (parallel blades) plug cap. For 240 volt applications use only UL Listed Detachable power supply cord with NEMA configuration 6-15P type (tandem blades) plug cap.

Hospital-grade power cord

Extension power cord (optional) Manufacturer: Bridgepower Part No: CB-47D2004P57MF (15ft) or CB-47D2022P86MF (75ft)

Power Supply Model No: JMW1100KB1300F02

AMM215MWTD

16

User’s Guide

User Functions / Messages Key Name and Function Power LED : Lights up to indicate the power is turned ON. Standby Power Button: To power ON or OFF the monitor. Rotary switch : With the OSD menu activated, increases the value of the selected (Turn Right) parameter or moves rightward in OSD menu. Rotary switch : With the OSD menu activated, increases the value of the selected (Turn Left) parameter or moves leftward in OSD menu. PIP Switch* : To enable or disable Picture In Picture function. PBP Switch* : To enable or disable Picture By Picture function. POP Switch*: To enable or disable Picture On Picture function. Adjust Switch* : To activate or deactivate image adjustment in sub screen of PIP, PBP, POP mode. Input Switch : To change the video source. Power Switch : To turn ON or OFF the system.

Standby Power Button

Power Switch

How to access the menu. 1. Push the “Knob” button to activate the OSD menu. 2. Able to turn left or right the button to select those icons. The icon will be highlighted when is selected. 3. Push the “knob” button to go into the another OSD menu. 4. Turn left or right “Knob” button to increase or decrease the number of selected function. 5. In order to exit from the OSD menu in a different layer, then choose the “Exit option”. In case of long pushing and holding the button around two or three seconds, then it will completely out from the menu regardless wherever you are. 6. Turn the “Knob” button in a fast way to the left or right, while the menu is not activated, then input signal menu will turns up with “V” mark which is chosen current available input signal. You can switch to another input signal source by turning the knob slowly then select the target source by pushing the knob. *Not available for touch models

AMM215MWTD 17 ENGLISH

OSD Section

Main Menu

Chromatic

Adjust Color Temp, Gamma

Visual

Adjust Brightness, Contrast, Phase*, Chroma*,

Sharpness-H, Sharpness-V

Setting

Adjust Scale Mode, Color Space*, Speaker, Freeze Frame,

Zoom / Pan, PIP**, POP**, PBP**

Advanced

Adjust OSD Position Control, Screen Control, DPMS, Auto

Source Select, Smart Select, Restore Factory, Key Lock, Overscan Information

Adjust Custom Entry, SN, Run Time, Input Format

Exit

Exit the menu

*Functions not available for AMM215MWTD **Functions not available for touch models

18

User’s Guide

OSD Section

Chromatic

Color Temp

Change the color temperature - D65, D93, S1, S2

Gamma

Change the gamma value - 1.8, 1.9, 1.95, 2.1, 2.1S, 2.2, 2.3,

2.4, 2.4S, S0, Radio graph

Exit

Exit the menu

Visual

Brightness

Adjust the brightness of panel (Range 0 - 100)

Contrast

Adjust the contrast of video (Range 0 - 100)

Phase*

Adjust the phase of video (Range 0 - 100)

Chroma*

Adjust the chroma of video (Range 0 - 100)

Sharpness-V

Set the sharpness of vertical image (Range 0 - 20)

Sharpness-H

Set the sharpness of horizontal image (Range 0 - 20)

Exit

Exit the menu

*Functions not available for AMM215MWTD

AMM215MWTD 19 ENGLISH

OSD Section

Setting

Scale Mode

Change the scale mode - Fill all, One to One, Vertical - fill, Horizontal - fill, Fill aspect ratio

Color Space* Change color space between RGB and YPbPr Speaker

Adjust volume (Range 0 - 100)

Freeze Frame

Off / On freeze frame

Zoom / Pan

Enable zoom - in and pan function

PIP**

Enable PIP (Picture In Picture) function

POP**

Enable POP (Picture On Picture) function

PBP**

Enable PBP (Picture By Picture) function

Exit

Exit the menu

*Functions not available for AMM215MWTD **Functions not available for touch models

20

User’s Guide

OSD Section

Sub menu of PIP* Mode

PIP Mode ON / Off

Source

PIP sub screen source - VGA, DVI1/2

Position

PIP sub screen position - Top L, Top R, Bottom L, Bottom R

Size

PIP sub screen size - Small, Medium, Large

Blending

PIP sub screen blending (Range 0 - 20)

Swap

PIP sub screen swap

Exit

Exit the menu

Sub menu of PBP* Mode

PBP Mode ON / Off

Source

PBP sub screen source - VGA, DVI1/2

Swap

PBP sub screen swap

Exit

Exit the menu

*Functions not available for touch models