AIRWAY Simulation Ltd
HEARTWORKS TTE Mobile Installation Guide v1.0
Installation Guide
13 Pages

Preview
Page 1
Installation Guide
HeartWorks V.10 (June 2018)
MedaPhor Support If you have any problems or queries regarding your HeartWorks simulator contact your MedaPhor regional sales representative or contact the support team:
[email protected] +44 (0) 2921 680 011 (UK office hours) +1 (770) 777-8191 (EST office hours) +(852) 3568-9009 (Asia-Pacific office hours)
2
Table of Contents Important information... 4 Packing list... 5
Installation Guide... 6 Getting started... 7 Connecting the torso overlay... 7 Connecting the TTE probe... 7 Connecting the laptop... 8 Connecting the laptop to a monitor/screen (optional)... 8 Dual screen configuration... 8
Software Guide... 10 Launching HeartWorks TTE Mobile... 11
3
Important information Warning •
Do not perform CPR on the manikin
•
Do not defibrillate the manikin
•
Do not perform pericardiocentesis on the manikin
Magnetic Interface Warning The manikin uses a highly accurate, pulsed direct-current magnetic-field tracking system. The presence of large metal objects or strong magnetic fields can affect the tracking performance. •
DO NOT mount the manikin on a metal object. Avoid tables with metal support structures.
•
Please keep the manikin on the foam pad provided whilst in use.
•
Keep all electricity supply cables away from the manikin.
Keep the manikin and sensors away from monitors, keyboards, mice, mobile phones and other portable electronic equipment while operating the HeartWorks system.
4
Packing list
•
1 x TTE Probe
• • • • •
1 x torso (manikin chest) overlay 1 x Ultrasound control case 1 x HP Zbook laptop 1 x connector box 1 x power supply
•
1 x scroll wheel mouse
•
1 x HP monitor (optional second screen)
•
1 x HeartWorks USB stick
•
1 x USB A-B cable
•
1 x Display Port to HDMI cable
•
1 x Cleaning Kit
•
1 x HeartWorks Mouse Mat 5
HeartWorks TTE Mobile Installation Guide
6
Getting started •
Get to know the support materials that came with your simulator.
•
Unpack all equipment carefully and check it against the list.
1
Connecting the torso overlay •
Connect the white transmitter cable from the TTE torso to the port marked ‘transmitter’ on the front 3D Guidance panel of the desktop.
•
The cable inserts in only one position, so apply light pressure and rotate it until you feel it click into place.
•
When removing the plug, pull back the outermost metal sleeve to release; DO NOT pull on the cabling. Manikin (transmitter) port
2
Connecting the TTE probe TTE Probe
•
For the TTE Probe, connect the cable with the blue marker to the port with the blue indicator on the 3D guidance panel. The cable inserts into only one position and is a click connection, so apply light pressure and rotate it until you feel it click into place.
•
When removing the plug, pull back the outermost metal sleeve to release; DO NOT pull on the cabling.
•
Connect the cable with the yellow marker into the port with the yellow marker on the secondary panel. This is a twist connection. Twist until the connection is secure.
•
Place the TTE probe on the manikin chest. 7
3
Connecting the laptop •
Place the laptop into position on the top part of the control case – using the Velcro holders/spacers to secure the laptop in position.
•
Connect the mouse USB cable to the side of the laptop.
•
Connect both USB cables through on the top of the case to the laptop. (One at each side)
•
Plug in the power cable, switch on the power switch at the back of the control case and turn on the laptop.
4
Connecting the laptop to a monitor/screen (optional) You can use an HDMI cable or Display Port Cable to connect the laptop to a larger screen or projector. However, you can also use a DVI cable if your screen/projector is older but note that the resolution of HeartWorks will be affected. You may need to change the resolution of the laptop in the NVidia settings screen. To do this: • From the Launch Panel, select Administrative Tools • Right click the mouse to bring up the NVidia setting panel • Select the desired resolution from there
5
Dual screen configuration If you were provided with an additional HP monitor please ensure that it is set-up to the left of the laptop screen. This monitor enables touch screen functionality.
•
8
Connect the HDMI cable to the monitor.
•
Connect the USB A-B cable into the rear of the landscape monitor.
•
Connect the other end of the USB cable to the laptop.
•
Connect the other end of the cable to the side of the laptop.
•
Plug the power cable into the rear of the monitor. Press the ‘on’ button to switch the monitor on.
If you are installing a secondary monitor for dual screen functionality, please ensure that it is placed to the left of the main landscape monitor in a portrait orientation. The system and software will be preconfigured in this arrangement but you may need to access the Windows screen resolution settings.
•
Right click on the desktop and select screen resolution after start up to reconfigure the displays if necessary.
Note: It is worth checking the display configurations in Windows before proceeding.
On initial start up, if both monitors are correctly connected and configured, and both are turned on, the display drop down menu will offer single monitor slash projector or dual monitors options.
•
Select dual monitors display before continuing to load the software as usual.
9
HeartWorks Software Guide
10
1
Launching HeartWorks TTE Mobile Turn on your system. When the system starts it will prompt you to accept a legal disclaimer. You must accept the legal disclaimer before using the software. Once you have accepted the legal disclaimer you will be presented with the launch panel.
The Launch Panel primarily presents you with a choice of imaging options and then allows you to launch the main HeartWorks application. Additional installation tasks can also be accessed on the Launch Panel by clicking on the ‘Options’ button.
•
To start the software choose a ‘Heart Pathology’ and press the ‘Begin Imaging’ button. Starting the software will then hide the Launch panel.
•
To return to the Launch Panel from the main HeartWorks application, press the close (‘X’) button on the right of the top menu bar.
11
•
HeartWorks will automatically try to connect to the external TTE probe when it opens the main application, but if it is not connected, click the ‘Connect’ button to activate the TTE probe.
•
When the probe is connected, the TTE button will display a tick.
The HeartWorks TTE Mobile system is active and ready to use.
12
MedaPhor is proud to work closely with healthcare educators from around the world to develop market leading simulators and learning systems that will help better prepare and support clinicians in the care of their patients.
www.medaphor.com