ALOKA

DIEGO ELITE System

DIEGO ELITE Handpiece Cleaning Quick-Reference Guide

2 Pages

HANDPIECE CLEANING QUICK-REFERENCE GUIDE This is designed as a quick-reference guide only. This guide is not a substitute for reading and learning the entire operator’s manual and/or instructions for use (IFU) provided the DIEGO ELITE System. Olympus cannot encourage or recommend any actions that deviate from or are not covered by the IFU.  PRE-CLEANING Wipe the external surfaces of the handpiece, cord, and plug with enzymatic detergent, sterile water, or tap water immediately after use.  MANUAL CLEANING 1  Fully immerse the handpiece, cord, and plug in the cleaning solution. Allow them to soak for ten minutes. Note the manufacturer’s instructions regarding the temperature and dilution factor for the detergent.  2  While immersed, gently scrub the areas shown below with the appropriate brushes (handpiece cleaning kit item EG70338009)  The gear shaft  The interior of the blade retention mechanism  The three-pin receptacle pocket and plug  The handpiece plug
File Type: PDF
File Size: 280 KB
File Name: OLYMPUS - DIEGO ELITE Handpiece Cleaning Quick-Reference Guide - 2013-11 - Edition 48xxx.X.000.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions