UA-767 Plus Instruction Manual

Contents Dear Customers ... 1 Precautions ... 2 Preliminary Remarks... 1 Parts Identification ... 3 Symbols ... 4 Using the Monitor... 5 Installing / Changing the Batteries... 5 Connecting the Air Hose... 5 Connecting the AC Adapter ... 5 Selecting the Correct Cuff Size ... 6 Applying the Arm Cuff... 7 How to Take Proper Measurements... 7 Measurement ... 7 After Measurement... 7 Measurements... 8 Normal Measurement ... 8 Measurement with the Desired Systolic Pressure ... 9 Notes for Proper Measurement ... 9 What is an Irregular Heartbeat ... 10 Pressure Bar Indicator... 10 WHO Classification Indicator... 10 About Blood Pressure ... 11 What is Blood Pressure? ... 11 What is Hypertension and How is it Controlled? ... 11 Why Measure Blood Pressure at Home? ... 11 WHO Blood Pressure Classification... 11 Blood Pressure Variations ... 11 Troubleshooting... 12 Maintenance... 13 Technical Data... 13

Dear Customers Congratulations on purchasing a state-of-the-art A&D blood pressure monitor, one of the most advanced monitors available today. Designed for ease of use and accuracy, this device will facilitate your daily blood pressure regimen. We recommend that you read through this manual carefully before using the device for the first time.

Preliminary Remarks This device conforms to the European Directive 93/42 EEC for Medical Products. This is made evident by the mark of conformity (0123: The reference number of the designated authority). The device is designed for use on adults only, not newborns or infants. Environment for use: The device is for use in the home healthcare environment. This device is designed to measure blood pressure and pulse rate of people for diagnosis. English

1

Precautions Precision components are used in the construction of this device. Extremes in temperature, humidity, direct sunlight, shock or dust should be avoided. Clean the device and cuff with a dry, soft cloth or a cloth dampened with water and a neutral detergent. Never use alcohol, benzene, thinner or other harsh chemicals to clean the device or cuff. Avoid tightly folding the cuff or storing the hose tightly twisted for long periods, as such treatment may shorten the life of the components. The device and cuff are not water resistant. Prevent rain, sweat and water from soiling the device and cuff. Measurements may be distorted if the device is used close to televisions, microwave ovens, cellular telephones, X-ray or other devices with strong electrical fields. Used equipment, parts and batteries are not treated as ordinary household waste, and must be disposed of according to the applicable local regulations. When the AC adapter is used, make sure that the AC adapter can be readily removed from the electrical outlet when necessary. When reusing the device, confirm that the device is clean. Do not modify the device. It may cause accidents or damage to the device. To measure blood pressure, the arm must be squeezed by the cuff hard enough to temporarily stop blood flow through the artery. This may cause pain, numbness or a temporary red mark to the arm. This condition will appear especially when measurement is repeated successively. Any pain, numbness, or red marks will disappear with time.

Contraindications The following are precautions for proper use of the device. Do not apply the cuff to an arm with another medical electrical equipment attached. The equipment may not function properly. People who have a severe circulatory deficit in the arm must consult a doctor before using the device, to avoid medical problems. Do not self-diagnose the measurement results and start treatment by yourself. Always consult your doctor for evaluation of the results and treatment. Do not apply the cuff on an arm with an unhealed wound. Do not apply the cuff on an arm receiving an intravenous drip or blood transfusion. It may cause injury or accidents. Do not use the device where flammable gases such as anesthetic gases are present. It may cause an explosion. Do not use the device in highly concentrated oxygen environments, such as a high-pressure oxygen chamber or an oxygen tent. It may cause a fire or explosion.

English 2

Parts Identification DC Jack START button

Display

Air Connector Plug Air Hose

Air Socket

Proper Fit Range Artery Position Mark Index Mark

Arm Cuff

Battery Cover Battery Compartment

1.5V Batteries (R6P, LR6 or AA)

Part of Display

MEMORY

Pressure Bar Indicator and WHO Classification Indicator Battery Indicator I.H.B. Indicator (Irregular heartbeat indicator) English 3

Systolic Pressure Diastolic Pressure Pulse Rate Heart Mark

Symbols Symbols

Function / Meaning Recommended Action Standby and Turn the device on. Battery installation guide Direct current SN Serial number Date of manufacture Type BF: Device, cuff and tubing are designed to provide special protection against electrical shocks. Measurement is in The indicator that appears while progress. Remain as measurement is in progress. It blinks still as possible. when the pulse is detected. Irregular Heartbeat indicator. (I.H.B.) The indicator that appears when an irregular heartbeat or any excessive body movement is detected during the measurement. Previous measurements stored in MEMORY. The battery power indicator during Full Battery measurement. Replace all batteries Low Battery The battery power is low when it blinks. with new ones, when the indicator blinks. Try measurement again. Unstable blood pressure due to Remain very still during movement during the measurement. the measurement. The systolic and diastolic values are within 10 mmHg of each other. The pressure value did not increase Apply the cuff correctly, during inflation. and try the measurement again. The cuff is not applied correctly.

PUL. DISPLAY ERROR SYS DIA PUL./min

EC

REP

The pulse is not detected correctly. Systolic blood pressure in mmHg Diastolic blood pressure in mmHg Pulse per minute EC directive medical device label WEEE label Manufacturer EU-representative Refer to instruction manual/booklet Class II device Polarity of DC jack English 4

Using the Monitor Installing / Changing the Batteries 1.

Slide the battery cover up to open it.

2.

Remove the used batteries and insert new batteries into the battery compartment as shown, taking care that the polarities (+) and (-) are correct. Use only R6P, LR6 or AA batteries.

3.

Step 1 Step 3

Step 2

Slide the battery cover down to close it.

CAUTION Insert the batteries as shown in the battery compartment. If installed incorrectly, the device will not work. When (LOW BATTERY mark) blinks on the display, replace all batteries with new ones. Do not mix old and new batteries. It may shorten the battery life, or cause the device to malfunction. (LOW BATTERY mark) does not appear when the batteries are drained. The battery life varies with the ambient temperature and may be shorter at low temperatures. Remove the batteries if the device is not to be used for a long time. The batteries may leak and cause a malfunction. Use the specified batteries only. The batteries provided with the device are for testing the device performance and may have a limited life.

Connecting the Air Hose Insert the air connector plug into the air socket firmly.

Air Hose

Air Connector Plug Air Socket

Connecting the AC Adapter Insert the AC adapter plug into the DC jack. Next, connect the AC adapter to an electrical outlet. Use the specified AC adapter. (Refer to page 14.) English 5

AC adapter plug

DC jack

Using the Monitor Selecting the Correct Cuff Size

Using the correct cuff size is important for an accurate reading. If the cuff is not the proper size, the reading may yield an incorrect blood pressure value. The arm size is printed on each cuff. The index and proper fit range, on the cuff, tell you if you are applying the correct cuff. (Refer to "Symbols that are printed on the cuff".) If the index points outside of the range, contact your local dealer to purchase a replacement cuff. The arm cuff is a consumable. If it becomes worn, purchase a new one. Arm Size Recommended Cuff Size 32 cm to 45 cm Large adult cuff 22 cm to 32 cm Adult cuff Arm size: The circumference of the biceps. Note: Model UA-767

is not designed for using a small adult cuff.

Symbols that are printed on the cuff Symbols Function/Meaning

Recommended Action mark on the artery of Set the the upper arm or in line with the ring finger on the inside of the arm.

Artery position mark ▲ REF

Catalog Number CUF-D-LA CUF-D-A

Index Catalog number Proper fit range for the adult cuff. It's printed on the adult cuff. Range to use the large adult cuff. Over range printed on the adult cuff. Proper fit range for the large adult cuff. It's printed on the large adult cuff. Under range printed on the adult cuff. Range to use the adult cuff. It's printed on the large adult cuff.

Use the large adult cuff instead of the adult cuff.

Use the adult cuff instead of the large adult cuff.

Lot number Proper fit range

Large adult cuff Proper fit range

Adult cuff

English 6

Using the Monitor Applying the Arm Cuff

1. Wrap the cuff around the upper arm, about 1-2 cm above the inside of the elbow, as shown. Place the cuff directly against the skin, as clothing may cause a faint pulse, and result in a measurement error.

Do not roll up shirtsleeve tightly

2. Constriction of the upper arm, caused by tightly rolling up a shirtsleeve, may prevent accurate readings.

Artery position mark

3.

Confirm that the index within the proper fit range.

Cuff

1 to 2 cm

Secure the fabric fastener firmly

points

Air hose Index

and Proper fit range

How to Take Proper Measurements For the most accurate blood pressure measurement: Sit comfortably on a chair. Rest your arm on the table. Do not cross your legs. Keep your feet on the floor and straighten your back. Relax for about five to ten minutes before measurement. Place the center of the cuff at the same height as your heart. Remain still and keep quiet during measurement. Do not measure immediately after physical exercise or a bath. Rest for twenty or thirty minutes before taking the measurement. Try to measure your blood pressure at the same time every day.

Measurement During measurement, it is normal for the cuff to feel very tight. (Do not be alarmed)

After Measurement After measurement, press the START Remove the cuff and record your data.

button to turn off the power.

Note: The device has an automatic power shut-off function, which turns the power off approximately one minute after measurement. Allow at least three minutes between measurements on the same person. English 7

Measurements Model UA-767 is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. If your systolic pressure is expected to exceed 230 mmHg or you use the optional small cuff, read "Measurement with the desired systolic pressure" on next page.

Normal Measurement 1.

Place the cuff on the arm (preferably the left arm). At heart level Sit quietly during measurement.

2.

Press the START button. The last data of systolic and diastolic pressure and pulse rate are displayed briefly. Then the display changes, as indicated in the figure at the right, as the measurement begins. The cuff starts to inflate. It is normal for the cuff to feel very tight. A pressure bar indicator is displayed, as in the figure at the right, during inflation. Note: If you wish to stop inflation at any time, press the START button again.

3.

When inflation is complete, deflation starts automatically and the (heart mark) blinks, indicating that the measurement is in progress. Once the pulse is detected, the mark flashes with each pulse beat. Note: If an appropriate pressure is not obtained, the device starts to inflate again automatically.

4.

5.

When the measurement is complete, the systolic and diastolic pressure readings and pulse rate are displayed. The cuff exhausts the remaining air and deflates completely. Press the START off the power.

button again to turn

START button

The last data at initial display Starts inflation

Pressurizing

Measurement in progress

Systolic pressure Diastolic pressure WHO classification Pulse rate Exhausts remaining air automatically

Note: Model UA-767 is provided with an automatic power shut-off function. Allow at least three minutes between measurements on the same person. English 8

Measurements Measurement with the Desired Systolic Pressure If your systolic pressure is expected to exceed 230 mmHg or you use the optional small cuff, use this procedure. 1.

Place the cuff on the arm (preferably the left arm).

2.

Press and hold the START button until a number about 30 to 40 mmHg higher than your expected systolic pressure appears.

3.

Release the START button to start measurement, when the desired number is reached. Then continue to measure your blood pressure as described on the previous page.

At heart level

Press and hold the button Release the button at the desired systolic pressure Refer to the previous page for measurement

Notes for Proper Measurement Sit down in a comfortable position. Place the arm to be used for the measurement on a table or other support so that the center of the cuff will be at the same height as your heart. Relax for about five to ten minutes before taking a measurement. If you are excited or depressed by emotional stress, the measurement will reflect this stress as a higher (or lower) than normal blood pressure reading and the pulse reading will usually be faster than normal. An individual's blood pressure varies constantly, depending on what you are doing and what you have eaten. What you drink can have a very strong and rapid effect on your blood pressure. This device bases its measurements on the heartbeat. If you have a very weak or irregular heartbeat, the device may have difficulty determining your blood pressure. Should the device detect a condition that is abnormal, it will stop the measurement and display an error symbol. See page 4 for the description of symbols. This blood pressure monitor is intended for use by adults only. Consult with your physician before using this device on a child. A child should not use this device unattended. English 9

What is an Irregular Heartbeat Model UA-767 blood pressure monitor provides a blood pressure and pulse rate measurement even when an irregular heartbeat occurs. An irregular heartbeat is defined as a heartbeat that varies by 25% from the average of all heartbeats during the blood pressure measurement. It is important that you be relaxed, remain still and do not talk during measurements. Note: We recommend contacting your physician if you see this indicator frequently.

Pressure Bar Indicator The indicator monitors the progress of pressure during measurement. Pressurizing

Inflation in progress

Releasing air

Measurement in progress Inflation complete

WHO Classification Indicator Each six segments of the bar indicator correspond to the WHO blood pressure classification described on the next page. WHO Classification Indicator Severe hypertension Moderate hypertension Mild hypertension High normal Normal Optimal

Moderate hypertension

Mild hypertension

: The indicator displays a segment, based on the current data, corresponding to the WHO classification.

English

Example:

10

High normal

About Blood Pressure What is Blood Pressure? Blood pressure is the force exerted by blood against the walls of the arteries. Systolic pressure occurs when the heart contracts. Diastolic pressure occurs when the heart expands. Blood pressure is measured in millimeters of mercury (mmHg). One's natural blood pressure is represented by the fundamental pressure, which is measured first thing in the morning while one is still at rest and before eating.

What is Hypertension and How is it Controlled? Hypertension, an abnormally high arterial blood pressure, if left unattended, can cause many health problems including stroke and heart attack. Hypertension can be controlled by altering lifestyle, avoiding stress, and with medication under a doctor’s supervision. To prevent hypertension or keep it under control: Do not smoke Exercise regularly Reduce salt and fat intake Have regular physical checkups Maintain proper weight

Why Measure Blood Pressure at Home? Blood pressure measured at a clinic or doctor's office may cause apprehension and can produce an elevated reading, 25 to 30 mmHg higher than that measured at home. Home measurement reduces the effects of outside influences on blood pressure readings, supplements the doctor's readings and provides a more accurate, complete blood pressure history.

WHO Blood Pressure Classification Standards to assess high blood pressure, without regard to age, have been established by the World Health Organization (WHO), as shown in the chart below.

Blood Pressure Variations

An individual’s blood pressure varies greatly on a daily and seasonal basis. It may vary by 30 to 50 mmHg due to various conditions during the day. In hypertensive individuals, variations are even more pronounced. Normally, the blood pressure rises while at work or play and falls to its lowest levels during sleep. So, do not be overly concerned by the results of one measurement. Take measurements at the same time every day using the procedure described in this manual to get to know your normal blood pressure. Regular English

11

readings give a more comprehensive blood pressure history. Be sure to note date and time when recording your blood pressure. Consult your doctor to interpret your blood pressure data.

Troubleshooting Problem

Possible Reason

Nothing Batteries are drained. appears in the display, even Battery terminals are not when the power in the correct position. is turned on.

The cuff does not inflate.

The unit does not measure. Readings are too high or too low.

Other

Battery voltage is too low. (LOW BATTERY mark) blinks. If the batteries are drained completely, the mark does not appear. The cuff is not applied properly. You moved your arm or body during the measurement. The cuff position is not correct.

The value is different from that measured at a clinic or doctor’s office.

Recommended Action Replace all batteries with new ones. Reinstall the batteries with negative and positive terminals matching those indicated on the battery compartment.

Replace all batteries with new ones.

Apply the cuff correctly. Make sure you remain very still and quiet during the measurement. Sit comfortably and still. Raise your hand so that the cuff is at the same level as your heart. If you have a very weak or irregular heat beat, the device may have difficulty in determining your blood pressure. See “Why measure blood pressure at home”.

Remove the batteries. Place them back properly and try the measurement again. Note: If the actions described above do not solve the problem, contact the dealer. Do not attempt to open or repair this product, as any attempt to do so will make your warranty invalid. English

12

Maintenance Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you cannot fix the problem using the troubleshooting instructions, request service from your dealer or from the A&D service group. The A&D service group will provide technical information, spare parts and units to authorized dealers. The device was designed and manufactured for a long service life. However it is generally recommended to have the device inspected every 2 years, to ensure proper functioning and accuracy. Please contact either your authorized dealer or A&D for maintenance.

Technical Data Type Measurement method Measurement range

UA-767 Oscillometric measurement Pressure: 20 - 280 mmHg Pulse: 40 - 200 beats / minute Measurement accuracy Pressure: ±3 mmHg Pulse: ±5% Power supply 4 x 1.5V batteries (R6P , LR6 or AA) or AC adapter (TB-233) (Not included) Number of measurements Approx. 450 measurements, when AA alkaline batteries are used, with pressure value of 180 mmHg at room temperature of 23°C Upper arm circumference 22 - 32 cm Classification Internally powered ME equipment (Supplied by batteries) / Class II (Supplied by adapter) Continuous operation mode Clinical test According to ANSI / AAMI SP-10 1987 EMC IEC 60601-1-2: 2007 Operating conditions +10°C to +40°C / 15%RH to 85 %RH 800 hPa to 1060 hPa Transport / Storage conditions -10°C to +60°C / 15%RH to 85 %RH Dimensions Approx. 147 [W] x 64 [H] x 110 [D] mm Weight Approx. 300 g, excepting batteries Applied part Cuff Type BF Useful life Device: 5 years (when used six times a day) Cuff: 2 years (when used six times a day)

English

13

Accessory AC adapter

The adapter is to connect the blood pressure monitor to a power source at home.

TB-233

Please contact your local A&D dealer for purchasing. The AC adapter is required to be inspected or replaced periodically. TB-233C

Input: 100-240V Output: 6V 139°C

TB-233BF

Input: 240V Output: 6V

500mA 2A

500mA 139°C

2A

Accessories sold separately Cuff Catalog Number Cuff Size Arm Size CUF-D-LA Large adult cuff 32 cm to 45 cm CUF-D-A Adult cuff 22 cm to 32 cm AC adapter Catalog Number TB-233C TB-233BF

Plug Type C Type BF

Note: Specifications are subject to change without prior notice. EMC table information is listed on our website: http://www.aandd.jp/products/manual/medical/emc_acadapter_en.pdf

English

14

Asahi 1-243, Kitamoto-shi, Saitama 364-8585, JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LIMITED Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131, U.S.A. Telephone: [1] (408) 263-5333 Fax: [1] (408)263-0119 A&D AUSTRALASIA PTY LTD 32 Dew Street, Thebarton, South Australia 5031, AUSTRALIA Telephone: [61] (8) 8301-8100 Fax: [61] (8) 8352-7409