Instruction Manual
12 Pages
Preview
Page 1
Before Use
Precision Health Scale Model UC-322
Precautions ... 1 Scale Components ... 2 Display Symbols ... 3 Installing (or Replacing) Batteries ... 4 Maintaining the Scale ... 4 Measuring Your Weight on a Carpet ... 5 Before Measuring Your Weight ... 5
Operations Resetting Your Height ... 6 Measuring Your Weight (With the preset height) .. 7 Measuring Your Weight (With no preset height) .. 8 Measuring Your Weight (Guest mode) ... 9 Displaying Data Saved in Memory ... 10 Deleting Data Saved in Memory ... 11
References Specifications ... 12 Before Requesting Service ... 12 How to Dispose of the Scale ... 12
Precautions Please read this booklet before using your scale. Your scale contains delicate, high-precision parts. Avoid extremes in temperature, humidity, direct sunlight, shock, moisture and dust. Do not place your scale on a soft, wet or slippy floor. Place your scale on a solid and level floor. Do not step on your scale with your feet wet so as to prevent you from slipping and falling down. Step on the center portion of your scale gently. Do not step on the display window. Do not disassemble or modify your scale. Keep your scale free of dust and foreign materials. Holding the switch for extended periods will shorten battery life.
Indications for Use The UC-322 was designed to be used indoors.
Compliance with European Directives The scale complies with the statutory EMC (Electromagnetic Compatibility) directive 89/ 336/EEC and the Low Voltage Directive 73/23/EEC. Note: The displayed value may be adversely affected under extreme electromagnetic influences. WM+PD4001090A
Scale Components Top
Underside
- 2 -
Display Symbols
Symbol
BMI
User 1
User 2
Description This symbol appears when the measurement display is stable.
Operation
This symbol appears when the BMI score is displayed after weight measurement.
Refer to “Measuring Your Weight (With the preset height)” on page 7.
This symbol appears when you are presetting your height.
Refer to “Presetting Your Height” on page 6.
This symbol appears when user 1 is measuring, displaying memory data or presetting the height. This symbol appears when user 2 is measuring, displaying memory data or presetting the height. The battery capacity is sufficient. The battery capacity is a little low. The battery capacity is low. The battery capacity is very low.
Flashing
- 3 -
Refer to pages 6-8, 10 and 11.
Use the scale as is. Replace the batteries with new ones. Replace the batteries with new ones immediately.
Installing (or Replacing) Batteries Caution Insert each battery with its positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment. If you fail these battery directions, it may cause battery leakage. Replace all four batteries with new ones, when the symbol appears flashing. When the batteries are completely depleted, nothing is displayed even if the switch is pressed. Do not mix used and new batteries. It may cause damage to the battery or scale, if used. The battery life is dependant upon the environmental temperature, battery type and usage. Remove the batteries from the battery compartment, when the scale is not to be used for a long time. They may leak and damage your scale. The battery life of the accessory batteries may be shorter than new ones.
Steps for Installing (or Replacing) Batteries 1 Remove the battery compartment cover on the underside of the scale by gently pushing the hook in the direction indicated by the arrow and lifting the cover backward.
2 Place four new batteries with the positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment.
3 Replace the cover by sliding it into the compartment and gently pressing into place.
Maintaining the Scale Clean the scale with a dry, soft cloth or a cloth moistened with water and a mild detergent. Never use alcohol, benzene, thinner or other harsh chemicals to clean the scale. Remove the batteries, if the scale is not going to be used for a long time. - 4 -
Measuring Your Weight on a Carpet Please use the accessory add-on feet if you wish to use the Precision Health Scale on a carpet.
Steps for Installing the Add-on Feet 1 Each add-on foot has two pins. Match those pins to the holes on the scale leg and insert firmly.
2 Place add-on feet on all four legs.
Note Please be careful not to fall when using the add-on feet. We recommend using this scale on a solid and level surface.
Before Measuring Your Weight If you preset your height, the scale can calculate your Body Mass Index or BMI. Refer to “Presetting Your Height” on page 6. What is BMI: Body Mass Index or BMI (kg/m2), based on an individual’s height and weight, is a helpful indicator of underweight, overweight or obesity, in adults. According to the WHO (World Health Organization) classification, the BMI scores are as listed to the right.
Underweight Normal Overweight Obese Very obese BMI=
Below 18.5 20 to 25 25.0 to 29.9 30.0 and above Above 40
Weight (kg) Height (m) x Height (m)
The scale can save weight data for two persons, 15 data for each, in memory and display them later. Refer to “Displaying Data Saved in Memory” on page 10. - 5 -
Presetting Your Height The scale can save a height between 30 cm and 220 cm in increments of 0.1 cm. The procedure below is an example of how to preset the height of user 1 to 179.1 cm.
1 With the scale turned off, press and hold the ON/OFF 1 switch. To preset the height of the user 2, press and hold the ON/OFF 2 switch.
2 Release the switch when - appears. Then, press the ON/OFF 1 switch again.
3 The height currently set appears. When the height has not been preset (factory setting), OFF appears. Under this condition, the BMI calculation is not available.
4 Set your height. Press the ON/OFF 1 switch to decrease the number, the ON/OFF 2 switch to increase the number. Press and hold the switch to increase or decrease the number continuously. The setting range is 30.0 cm to 220.0 cm. When the number reaches 220.0, OFF appears and the number returns to 30.0.
5 After five seconds, the height is saved in memory. End appears and the scale turns off automatically.
- 6 -
Measuring Your Weight (With the preset height) Up to 15 weight data can be saved in memory, each for user 1 and for user 2. Additional measurements are saved by deleting the oldest data in memory. After measurement, the BMI score is displayed. The procedure below is an example of how to measure the weight of user 1 with the preset height of 179.1 cm.
1 Press the ON/OFF 1 switch. The height currently set appears flashing. To measure the weight of user 2, press the ON/OFF 2 switch.
2 Wait until the OK symbol appears. Wait until the display 0.00 kg and the OK symbol appear. Step on the scale gently.
3 Stand still during measurement. When the OK symbol disappears, the measurement sequence has initiated. Stand still during the measurement.
4 Your weight is displayed after the OK symbol appears.
5 Step off the scale. 6 The BMI score and the weight are displayed alternately. At this time, the weight is saved in memory. After displaying the BMI score three times and the weight two times, the scale turns off automatically. - 7 -
Measuring Your Weight (With no preset height) Up to 15 weight data can be saved in memory, each for user 1 and for user 2. Additional measurements are saved by deleting the oldest data in memory. The procedure below is an example of how to measure the weight of user 1, of whose height has not been preset.
1 Press the ON/OFF 1 switch. 88888 appears flashing. To measure the weight of user 2, press the ON/OFF 2 switch.
2 Wait until the OK symbol appears. Wait until the display 0.00 kg and the OK symbol appear. Step on the scale gently.
3 Stand still during measurement. When the OK symbol disappears, the measurement sequence has initiated. Stand still during the measurement.
4 Your weight is displayed after the OK symbol appears.
5 Step off the scale. For five seconds, the weight is displayed. At this time, the current measurement is saved. After five seconds, the scale turns off automatically.
- 8 -
Measuring Your Weight (Guest mode) The guest mode is a procedure to measure a weight without saving the weight data.
1 Press the ON/OFF 1 and ON/OFF 2 switches at the same time. 88888 appears flashing.
2 Wait until the OK symbol appears. Wait until the display 0.00 kg and the OK symbol appear. Step on the scale gently.
3 Stand still during measurement. When the OK symbol disappears, the measurement sequence has initiated. Stand still during the measurement.
4 Your weight is displayed after the OK symbol appears.
5 Step off the scale. For five seconds, the weight is displayed, and then the scale turns off automatically.
- 9 -
Displaying Data Saved in Memory The procedure below is an example of how to display the weight data of user 1 that was saved in memory.
1 With the scale turned off, press and hold the ON/OFF 1 switch. To display the weight data of user 2, press and hold the ON/OFF 2 switch.
2 Release the switch when - appears. Then, press the ON/OFF 2 switch within five seconds. If the ON/OFF 2 switch is not pressed within five seconds, the scale turns off automatically.
3 The data number and weight data are displayed. Weight data is displayed in order from the most recent to the oldest.
4 After the oldest data is displayed, End appears and the scale turns off automatically. - 10 -
Deleting Data Saved in Memory The procedure below is an example of how to delete the weight data of user 1 that was saved in memory.
1 With the scale turned off, press and hold the ON/OFF 1 switch. To delete the weight data of user 2, press and hold the ON/OFF 2 switch.
2 Release the switch when - appears. Then, press the ON/OFF 2 switch within five seconds. If the ON/OFF 2 switch is not pressed within five seconds, the scale turns off automatically.
3 After displaying the number of data currently saved in memory for one s e c o n d , t h e w e i g h t d a ta i s displayed. At this time, press and hold the ON/OFF 1 and ON/OFF 2 switches at the same time.
4 Up to five dashes - appear from the right side of the display. If the switches are released before the display - - - - - appears, the scale turns off automatically and does not delete the weight data.
5 End appears and the scale deletes the weight data in memory.
- 11 -
Specifications Measuring method Electric resistance Digital display Liquid crystal display, 18 mm character height Maximum capacity (MAX) 150 kg Minimum display (d) 0.05 kg Power source Four type AA batteries (R6P, 1.5 volt x 4) Battery life Approximately 2000 measurements Dimensions 210 (D) x 295 (W) x 40 (H) mm Weight Approx. 1.7 kg, including the batteries Accessories Instruction manual, add-on feet (4), batteries (4) Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.
Before Requesting Service Corrective action Symptoms Nothing is displayed by pressing the Check the battery installation. Replace all four batteries with new ones. ON/OFF switch. Is anything touching the scale? The display remains flashing or is Is there anything under the scale? fixed to the display - - - - - . E-0 appears. H or L remains displayed. Remove and reinstall the batteries. Place the scale on a solid and level surface. The difference between an estimated weight and a measured weight is bigger. When the scale is placed on a carpet, use the add-on feet. Is there anything under the scale?
How to Dispose of the Scale Follow the local regulations when disposing of the scale.