Site~Rite 8 Ultrasound System Instructions For Use Addendum
Probe Connection Instructions
instructions for use
Turn off the Site~Rite® 8 Ultrasound System Console before connecting or disconnecting the
Site~Rite® 8 Ultrasound Probe.
For a complete list of warnings and cautions, as well as information regarding how to handle, clean,
and use the Site~Rite® 8 Ultrasound Probe with the Site~Rite® 8 Ultrasound System, please consult
the Instructions for Use that were shipped with the Site~Rite® 8 Ultrasound System Console
For a copy of the Site~Rite® 8 Ultrasound System Instructions for Use, go to www.bardaccess.com,
or call Bard Acess Systems Technical Support at 1-800-545-0890.
To Connect Probe:
Align probe connector and gently insert into the console
To Remove Probe:
1. Press the two latches on the probe connector
2. Gently pull on the connector to disconnect the probe
Note: If the EC204 error appears, connect/reconnect the probe
and restart the system.
Caution: Do not force the probe connector; damage to the
connector and system could result.
An issued or revision date for these instructions is included for the user’s
information. In the event that two years have lapsed between the issued revision
date and use of the product, contact Bard Access Systems, Inc. to see if any
additional product information is available.
Revision date: August 2017
Bard Access Systems, Inc.
605 North 5600 West
Salt Lake City, UT 84116
Bard and Site~Rite are trademarks and/or registered trademarks of C. R. Bard, Inc.
© 2017 C.R. Bard, Inc. All rights reserved.