BELMONT MEDICAL TECHNOLOGY

Rapid Infuser RI-2 Quick Setup Guide R001

Quick Setup Guide

4 Pages

Quick Setup Guide 1 Plug the main connector of the detachable power cable into a dedicated circuit breaker. Fully seat the device connector (C-19) of the power cable into the power receptacle on the back of The Belmont® Rapid Infuser RI-2. If a moisture guard is present, ensure it is over the device connector and at against the back of the machine.  2  Tighten all connections and snap the reservoir chamber into the support  5  4  3  Place the pressure chamber into the pressure chamber well and press the infuse line into the air detector  Load the circular heat exchanger with the red arrow pointing up  6  7  Place the infuse line to the left Firmly position the interlock Place the larger blue tubing of the valve wand and the block on top of the shelf with in the groove to the left and thinner recirc line to the right the blue arrow pointing inward the smaller tubing to the right, of the valve wand close and latch the door 6  3  4  Instructional Video  5  7
File Type: PDF
File Size: 18.2 MB
File Name: BELMONT MEDICAL TECHNOLOGY - 403-00425-E - Rapid Infuser RI-2 Quick Setup Guide R001.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions