Corometrics

LOGIQ Ultrasound Systems

LOGIQ e Extended Life Battery User Instructions Rev 2

User Instructions

66 Pages

LOGIQ e Extended Life Battery User Instructions Installing Extended Life Battery  Direction 5494921-100 English, Revision 2  1  Installing Extended Life Battery (continued)  NOTE: This Extended Life Battery only applies to the Docking Cart which supports the LOGIQ e system with software R8.x.x or higher.  1. Switch off the circuit breaker on the power box to power off the Docking Cart. Refer to picture 1. 2. Flip down the 2 cover latches on the battery cover. Refer to picture 2. 3. Remove the battery cover from the power box. Refer to picture 3. 4. Insert the battery into the power box. Refer to picture 4. 5. Push the battery into the power box. Refer to picture 5. 6. Flip up the 2 latches on the battery. Refer to picture 6.  Removing Extended Life Battery  7. Try pulling the battery to check if the battery is fixed in the power box. Refer to picture 7.  1. Switch off the circuit breaker (b) on the power box to power off the Docking Cart and press Switch On/Off button (a) to power off the Extended Life Battery. Refer to picture 1.  a. If the battery can not be pulled out, it means the battery is well installed.  2. Flip down the two handle locks on the Extended Life Battery. Refer to picture 2.  b. If the battery can be pulled out, it means the battery is not well installed. Reinstall the battery until it can not be pulled out from the power box.  3. Pull out the Extended Life Battery. Refer to picture 3. 4. While pressing the two spring lockings on both side of the Extended Life Battery with fingers, move out the battery. Refer to picture 4. 5. When the two spring lockings are released, take out the Extended Life Battery with both hands. Refer to picture 5.
File Type: PDF
File Size: 51.9 MB
File Name: LOGIQ e Extended Life Battery User Instructions Rev 2.PDF

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions