Basic Service Manual
778 Pages
Preview
Page 1
LOGIQ E10 Basic Service Manual
5750007-1EN Rev. 1 Version R1 © 2018 GENERAL ELECTRIC COMPANY.
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
Important Precautions TRANSLATION POLICY
i
DIRECTION 5750007-1EN, REVISION REV. 1
ii
LOGIQ E10 BASIC SERVICE MANUAL
-
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
iii
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
v
DIRECTION 5750007-1EN, REVISION REV. 1
viii
LOGIQ E10 BASIC SERVICE MANUAL
-
DIRECTION 5750007-1EN, REVISION REV. 1
x
LOGIQ E10 BASIC SERVICE MANUAL
-
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
DAMAGE IN TRANSPORTATION All packages should be closely examined at time of delivery. If damage is apparent write “Damage In Shipment” on ALL copies of the freight or express bill BEFORE delivery is accepted or “signed for” by a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the contents and containers held for inspection by the carrier. A transportation company will not pay a claim for damage if an inspection is not requested within this 14 day period.
CERTIFIED ELECTRICAL CONTRACTOR STATEMENT - FOR USA ONLY All electrical Installations that are preliminary to positioning of the equipment at the site prepared for the equipment shall be performed by licensed electrical contractors. Other connections between pieces of electrical equipment, calibrations and testing shall be performed by qualified GE personnel. In performing all electrical work on these products, GE will use its own specially trained field engineers. All of GE’s electrical work on these products will comply with the requirements of the applicable electrical codes. The purchaser of GE equipment shall only utilize qualified personnel (i.e., GE’s field engineers, personnel of third-party service companies with equivalent training, or licensed electricians) to perform electrical servicing on the equipment.
OMISSIONS & ERRORS If there are any omissions, errors or suggestions for improving this documentation, please contact the GE Global Ultrasound Documentation Group with specific information listing the system type, manual title, part number, revision number, page number and suggestion details. Mail the information to: Service Documentation 9900 Innovation Drive (RP-2156) Wauwatosa, WI 53226, USA. GE employees should use Post-market Quality Management (PQM) to report service documentation issues. These issues will then be in the internal problem reporting tool and communicated to the writer.
SERVICE SAFETY CONSIDERATIONS DANGER DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT IN
THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING AND ADJUSTING. WARNING Use all Personal Protection Equipment (PPE) such as gloves, safety shoes, safety
glasses, and kneeling pad, to reduce the risk of injury. For a complete review of all safety requirements, see the Chapter 1, Safety Considerations section in the Service Manual.
xiii
DIRECTION 5750007-1EN, REVISION REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
LEGAL NOTES The contents of this publication may not be copied or duplicated in any form, in whole or in part, without prior written permission of GE. GE may revise this publication from time to time without written notice.
TRADEMARKS All products and their name brands are trademarks of their respective holders.
COPYRIGHTS © 2018 by General Electric Company Inc. All Rights Reserved.
DECLARATION OF CONFORMITY The radio equipment used in the LOGIQ E10 (if present) conforms to the Radio Equipment Directive 2014/53/EU (RED). The declaration of conformity can be found at the following link: https://www.intel.com/content/www/us/en/support/articles/000007443/network-and-i-o/wirelessnetworking.html Search under Current or Legacy Adapters for: Intel® Dual Band Wireless-AC 8260NGW Figure
WLAN Label for Intel 8620NGW Module THIS SYSTEM CONTAINS THE FOLLOWING WIRELESS MODULE: INTEL 8260NGW FCC ID: PD98260NG IC: 1000M-8260NG 02607-15-02198 Complies with IDA Standard DB 02914 HDIF15000519
xiv
-
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
Revision History Revision
Date
Rev. 1
2018/02/08
Reason for change LOGIQ E10 M3 Release
List of Effected Pages (LOEP) Chapter
Revision
Chapter
Revision
Chapter
Revision
Title Page
Rev. 1
Chapter 4
Rev. 1
Chapter 10
Rev. 1
Warnings
Rev. 1
Chapter 5
Rev. 1
Index
Rev. 1
TOC
Rev. 1
Chapter 6
Rev. 1
Back Cover
N/A
Chapter 1
Rev. 1
Chapter 7
Rev. 1
Chapter 2
Rev. 1
Chapter 8
Rev. 1
Chapter 3
Rev. 1
Chapter 9
Rev. 1
xv
DIRECTION 5750007-1EN, REVISION REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
This page was intentionally left blank.
xvi
-
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
Table of Contents CHAPTER 1 Introduction Overview... 1 - 1 Purpose of this chapter... 1 - 1 Contents in this chapter... 1 - 1 Service manual overview... 1 - 2 Attention... 1 - 2 Contents in this service manual... 1 - 3 Typical users of LOGIQ E10 documentation... 1 - 4 LOGIQ E10 models covered in this manual... 1 - 4 Product description... 1 - 5 Important conventions... 1 - 6 Conventions used in book... 1 - 6 Standard hazard icons... 1 - 7 Product icons... 1 - 10 Product Labels on the LOGIQ E10 when used in a veterinary environment 1 - 17 Safety considerations... 1 - 18 Introduction... 1 - 18 Human safety... 1 - 18 Mechanical safety... 1 - 21 Electrical safety... 1 - 24 Battery safety... 1 - 25 Label locations... 1 - 26 Dangerous procedure warnings... 1 - 27 Lockout/tagout (LOTO) requirements... 1 - 28 Lockout/Tagout Procedure... 1 - 29 Returning/shipping probes and repair parts... 1 - 30 Electromagnetic compatibility (EMC)... 1 - 31 What is EMC?... 1 - 31 Compliance... 1 - 31 Electrostatic discharge (ESD) prevention... 1 - 32 Table of Contents
xvii
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
Customer assistance... 1 - 33 Contact information... 1 - 33 Ultrasound system manufacturer... 1 - 35
xviii
-
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
CHAPTER 2 Site Preparations Overview... 2 - 1 Purpose of this chapter... 2 - 1 Contents in this chapter... 2 - 1 General LOGIQ E10 requirements... 2 - 2 LOGIQ E10 environmental requirements... 2 - 2 Electrical requirements... 2 - 4 EMI limitations... 2 - 6 Probe environmental requirements... 2 - 8 Time and manpower requirements... 2 - 8 Facility needs... 2 - 9 Purchaser responsibilities... 2 - 9 Required facility needs... 2 - 10 Desirable features... 2 - 11 Minimal floor plan suggestions... 2 - 11 Networking setup requirements... 2 - 13 Privacy and Security... 2 - 15 Environmental Dangers... 2 - 15
xix
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
CHAPTER 3 LOGIQ E10 Setup Overview... 3 - 1 Purpose of this chapter... 3 - 1 Contents in this chapter... 3 - 1 Setup reminders... 3 - 2 Average setup time... 3 - 2 Setup warnings... 3 - 2 Receiving and unpacking the equipment... 3 - 4 Purpose of this section... 3 - 4 Receiving and unpacking warnings... 3 - 4 Tilt indicator... 3 - 5 Receiving the LOGIQ E10... 3 - 7 Unpacking the LOGIQ E10... 3 - 8 Packing materials - recycling information... 3 - 11 Preparing for setup... 3 - 12 Verify customer order... 3 - 12 Physical inspection... 3 - 12 Volume Navigation stand (optional)... 3 - 12 Rear cover label and rating label... 3 - 13 EMI protection... 3 - 15 Completing the setup... 3 - 16 Purpose of this section... 3 - 16 LOGIQ E10 specifications... 3 - 16 Electrical specifications... 3 - 17 Connections on the I/O Rear panel... 3 - 18 Connections on the Patient I/O panel... 3 - 19 Connecting Probes... 3 - 19 Power On/Boot Up... 3 - 21 Password Policies... 3 - 24 Disc Encryption... 3 - 28 Login... 3 - 31 Logoff/Power shut down... 3 - 33 Complete power down... 3 - 34 Configuration... 3 - 35 Purpose of this section... 3 - 35 LOGIQ E10 configuration... 3 - 35 xx
-
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
Optional Peripherals/Peripheral Connection... 3 - 36 Software Options Configuration... 3 - 37 Setup paperwork... 3 - 40 User Manual(s)... 3 - 40 Product Locator Card/UDI... 3 - 40
xxi
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
CHAPTER 4 Functional Checks Overview... 4 - 1 Purpose of this chapter... 4 - 1 Contents in this chapter... 4 - 1 Special Equipment required... 4 - 1 Functional checks... 4 - 2 General procedures... 4 - 3 Overview... 4 - 4 Power ON/Boot Up... 4 - 6 Power SHUT DOWN... 4 - 9 Top Console checks... 4 - 10 Brakes and Direction Lock Functional Checks... 4 - 14 Operation checks... 4 - 15 Site Log... 4 - 28
xxii
-
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
CHAPTER 5 Components and Functions (Theory) Overview... 5 - 1 Purpose of this chapter... 5 - 1 Contents in this chapter... 5 - 1 LOGIQ E10 models... 5 - 2 LOGIQ E10 description... 5 - 3 Purpose of this section... 5 - 3 Introduction... 5 - 3 LOGIQ E10 general description... 5 - 4 Software overview... 5 - 5 Purpose of this section... 5 - 5 LOGIQ E10 Base Load Image and Application Software... 5 - 6 Electronic media... 5 - 7 Log File Content... 5 - 8 Smart Devices Applications... 5 - 9 Service Desktop... 5 - 10 User Level of the Service Desktop... 5 - 10 Front End... 5 - 12 Purpose of this section... 5 - 12 Card Rack General description... 5 - 13 Back End... 5 - 14 Purpose of this section... 5 - 14 ECB... 5 - 15 SSD... 5 - 17 Backplane... 5 - 18 Purpose of this section... 5 - 18 Backplane... 5 - 19 Top Console with Main Monitor and Operator Panel... 5 - 20 Purpose of this section... 5 - 20 Transporting LOGIQ E10... 5 - 20 Operator Panel XY movement - principle of operation... 5 - 20 Power distribution... 5 - 21 Purpose of this section... 5 - 21 xxiii
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
Main Power Supply... 5 - 22 Air Flow control... 5 - 25 General description... 5 - 25 Location in the LOGIQ E10... 5 - 25 Casters and Brakes description... 5 - 26 Options and Peripherals descriptions... 5 - 27 Purpose of this section... 5 - 27 Internal Hardware Options and Peripherals... 5 - 27 External peripherals... 5 - 28 Product manuals... 5 - 29 User documentation... 5 - 29 Basic Service documentation... 5 - 29
xxiv
-
DIRECTION 5750007-1EN, REV. 1
LOGIQ E10 BASIC SERVICE MANUAL
CHAPTER 6 Service Adjustments Overview... 6 - 1 Purpose of this chapter... 6 - 1 Monitor adjustments... 6 - 2 Purpose of this section... 6 - 2 Access to Adjustments... 6 - 3 Monitor Adjustment Procedure... 6 - 4 Advanced Monitor Adjustments... 6 - 6 Monitor Arm and/or Monitor range of motion Adjustment procedure... 6 - 10 Purpose of this section... 6 - 10 Cautions and Warnings... 6 - 10 Main Monitor Arm and Monitor Friction Adjustment - Ergotron Arm... 6 - 11 Operator Panel movement... 6 - 13 Purpose of this section... 6 - 13 Adjusting the Z-Mechanism... 6 - 14 Adjusting the XY Locking Mechanism... 6 - 15 Using the Park Lock Properly... 6 - 16 Adjust time-out for DICOM servers... 6 - 17 Volume Navigation Calibration Procedure... 6 - 17
xxv