Accutorr PLUS 2.5 Service Manual Rev AC Jan 2015

This page intentionally left blank.

ii

Accutorr Plus, Service Manual Chapter 1 - Operation

TABLE OF CONTENTS INTRODUCTION... i 1.0 OPERATION... 1-1 1.1 Introduction... 1-1 1.2 Controls and Indicators... 1-3 1.2.1 Front Panel... 1-4 1.2.2 Rear Panel... 1-13 1.2.3 Predictive Thermometer Module... 1-14 1.2.4 Recorder Module... 1-15 1.3 Operation... 1-17 1.3.1 Setting-Up / Turning Power On... 1-17 1.3.2 Patient Setup and Room/Bed Assignment... 1-18 1.3.2.1 Selecting the Patient Size... 1-18 1.3.2.2 Cuff Inflation Pressure... 1-18 1.3.2.3 Room Number and Bed Letter... 1-19 1.3.3 Manual NIBP Measurements and General NIBP Measurement Information... 1-20 1.3.3.1 NIBP Pressure Limit Fail Safe... 1-22 1.3.3.2 Cuff Inflation Time... 1-22 1.3.3.3 Automatic Adjustment of Cuff Inflation Pressure (Adaptive Inflation)... 1-22 1.3.4 Automatic NIBP Measurements (Interval Mode)... 1-23 1.3.4.1 Canceling an Automatic NIBP Measurement... 1-23 1.3.4.2 Changing the Interval setting... 1-24 1.3.4.3 Effects of Changing the Room Number and /or Bed Letter on the Interval Setting... 1-24 1.3.4.4 Start and Deflate Functions... 1-24 1.3.5 Alarms... 1-25 1.3.5.1 Setting Alarm Limits... 1-25 1.3.5.2 Alarm Violations... 1-26 1.3.5.3 How to Mute Alarms... 1-27 1.3.5.4 Alarms and Changing the Room Number and/or Bed Letter... 1-27 1.3.6 To View and Delete Stored Data (Trend Mode)... 1-28 1.3.6.1 To View the Stored Measurements on the Accutorr Plus NIBP... 1-28 1.3.6.2 To View the Stored Measurements on the Accutorr Plus NIBP with Trend Screen and the Accutorr Plus NIBP with Trend Screen and SpO2... 1-29

Accutorr Plus Service Manual Introduction

iii

1.3.6.3

To Delete the Stored Measurements on all Models of the Accutorr Plus... 1-29 1.3.7 Setting the Alarm Volume and Beep Volume... 1-30 1.3.8 Setting the LCD Contrast (View Angle Adjustment) . . 1-31 1.3.9 Display Time Out Mode... 1-32 1.3.10 SpO2 Measurements (Accutorr Plus model with SpO2) . 1-33 1.3.10.1 Datascope Pulse Oximetry Sensors... 1-33 1.3.10.2 Sequence for Establishing SpO2 with Nellcor® Pulse Oximetry*... 1-37 1.3.10.3 Sequence for Establishing SpO2 with MasimoÒ Pulse Oximetry*... 1-40 1.3.11 Temperature Measurement (optional)... 1-43 1.3.11.1 Predictive Thermometer Measurements... 1-43 1.3.11.2 How to Apply Probe Cover (PTM)... 1-43 1.3.11.3 How to Take Oral, Rectal, and Axillary Temperatures . 1-44 1.3.11.4 Storing Temperature Measurements... 1-45 1.3.12 Recorder (optional)... 1-46 1.3.13 How to Set the Clock (Date and Time)... 1-47 1.3.14 Battery Operation... 1-48 1.3.15 User Configuration... 1-49 1.3.16 Status and Error Codes... 1-51 1.3.17 How to Attach Optional Thermometer and Recorder Modules... 1-52 1.3.18 Placement of the Quick Reference Card... 1-53 1.3.19 Placement of Recorder Paper Loading Label... 1-54 2.0 THEORY OF OPERATION... 2-1 2.1 Block Diagrams... 2-1 2.2 Detailed Circuit Descriptions... 2-2 2.2.1 LED/CPU Module, 0670-00-0650-03, -04... 2-9 2.2.1.1 Hardware Overview... 2-9 2.2.1.2 Software Overview... 2-9 2.2.1.3 Detailed Hardware Description... 2-10 2.2.2 NIBP Module, Linear Bleed... 2-17 2.2.3 Recorder Module... 2-20 2.2.4 Predictive Thermometer Module... 2-21 2.2.5 SpO2 Module (Accutorr Plus with SpO2 only)... 2-22 2.2.6 Main Power Supply... 2-25 2.2.7 Communication Board... 2-26 2.2.8 LCD Inverter Module - 0670-00-0649... 2-28 2.2.9 Nellcor® MP 304 SpO2 Circuit Board Theory of Operation... 2-29 2.2.10 Interface NellcorÒ Board Theory of Operation... 2-30 iv

Revised 12/20/00

Accutorr Plus Service Manual Introduction

2.2.11 2.2.12

Masimo SETÒ Technology... 2-31 Masimo Interface Board Theory of Operation... 2-32

3.0 SPECIFICATIONS... 3-1 3.1. Performance Specifications... 3-1 3.2 Safety Characteristics... 3-6 3.3 Physical Characteristics... 3-7 3.4 Environmental Characteristics... 3-7 3.5 Electrical Ratings... 3-7 3.6 Agency Compliance... 3-8 3.7 Electromagnetic Compatibility... 3-8 4.0 REPAIR INFORMATION... 4-1 4.1 4.2 4.3 4.4 4.5

Introduction... 4-1 Safety Precautions... 4-2 General Troubleshooting Guidelines... 4-2 Test Equipment Required... 4-3 Troubleshooting (Problem Isolation)... 4-4 4.5.1 Isolating the Problem, System Level... 4-5 4.5.2 Isolating the Problem within the Main Unit... 4-5 4.5.3 Isolating the Problem with Optional Accessory Modules. . . 4-6 4.5.4 Clinical Issues... 4-6 4.6 Disassembly Instructions... 4-9 4.6.1 Removal of the Rear Housing (27)... 4-9 4.6.2 Removal of the Front Bezel (2)... 4-9 4.6.3 Removal of the Keyboard Assembly (4)... 4-9 4.6.4 Removal of the CPU Board Assembly (8)... 4-10 4.6.5 Removal of the NIBP Circuit Assembly (30)... 4-10 4.6.6 Removal of the Power Supply Assembly (41)... 4-10 4.6.7 Removal of the Motor Filter and LCD High Voltage Assembly (35)... 4-11 4.6.8 Removal of the NIBP Air Pump Assembly (37)... 4-11 4.6.9 Removal of the LCD Display Assembly and Back Light (5) 4-11 4.6.10 Removal of the SpO2 Circuit Board (40)... 4-11 4.6.11 Removal and Replacement of the Internal Sealed Lead Acid or Li-Ion Battery... 4-12 4.6.12 Removal of the AC Input Receptacle Assembly (16) . . . 4-12 4.6.13 Thermal Printer (Optional Module)... 4-12 4.6.14 Thermometer, Predictive (Optional Module)... 4-13 4.6.15 AccuTemp IR, Infrared Thermometer (optional module)... 4-13 4.6.16 AccuTemp IR Mounting Cradle... 4-13 Accutorr Plus Service Manual Introduction

Revised 12/20/00

v

4.6.17

Communication Board (45)... 4-13

5.0 ASSEMBLY AND SCHEMATIC DIAGRAMS... 5-1 6.0 REPLACEMENT PARTS... 6-1 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8

Introduction... 6-1 Available Replacement Parts and Sub-Assemblies... 6-1 Product Variations and Options... 6-1 Exchange Program... 6-1 Replacement Parts Pricing Information... 6-2 Ordering Information... 6-2 Abbreviations... 6-3 Isometric Drawings and Parts List... 6-5 6.8.1 Accutorr Plus Isometric Parts List (All Models)... 6-5 6.8.2 Recorder Module Isometric Parts List... 6-13 6.8.3 Predictive Temperature Module Isometric Parts List. . . 6-15 6.8.4 Mobile Stand Type 1 (Gray Base) Assembly Parts List . 6-17 6.8.5 Mobile Stand Type 2 (Black Base) Assembly Parts List . 6-19 6.8.6 Mounting Options... 6-19 6.9 Circuit Board Parts Lists... 6-21 7.0 CALIBRATION... 7-1 7.1 7.2 7.3 7.4 7.5

vi

Revised 9/20/07

Introduction... 7-3 Warnings and Guidelines... 7-3 Test Equipment and Special Tools Required... 7-3 Power-Up Sequence, Internal Testing... 7-4 Service Diagnostics... 7-4 7.5.1 Introduction (Hidden Key)... 7-4 7.5.2 Software Version Test (0a, 0b)... 7-5 7.5.3 Keypad Test... 7-6 7.5.4 LED Test (2a, 2b)... 7-7 7.5.5 Communications Test (3a, 3b)... 7-7 7.5.6 Recorder Test (4)... 7-7 7.5.6.1 Recorder Print Head Adjustment... 7-8 7.5.7 Pump Test (5)... 7-8 7.5.8 Leak Test (7)... 7-9 7.5.9 Over Pressure Test (8a, 8b, 8c)... 7-9 7.5.10 Pulse Channel DC Offset Test (9a, 9b, 9c)... 7-10 7.5.11 Pulse Channel Average Noise Test (10a, 10b, 10c)... 7-10 7.5.12 Main Pressure Transducer Verification Test (11a, 11b, 11c)... 7-11

Accutorr Plus Service Manual Introduction

7.5.13

Verification of Accutorr Plus Pneumatic Performance, Using the “Cufflink” NIBP Emulator (11d)... 7-11 7.5.14 Over Pressure Transducer Verification (12c, 12a, 12b) . 7-12 7.5.15 Main Pressure Transducer Calibration... 7-12 7.5.16 Over Pressure Transducer Calibration... 7-13 7.5.17 Battery Selection (13)... 7-13 7.6 Predictive Thermometer Verification and Calibration... 7-14 7.6.1 Temperature Accuracy Verification with the Predictive Temperature Simulator... 7-14 7.6.2 Water Bath Method... 7-15 7.6.3 System Calibration Procedure... 7-15 7.6.4 Temperature Verification Test, Infrared Thermometer... 7-16 7.6.5 Low Battery Sensing... 7-17 7.7 Battery Test for Accutorr Plus... 7-18 7.7.1 Low Battery Indicator and Low Battery Cut-Off... 7-18 7.7.2 Set the Current Time... 7-19 7.8 NIBP Normal Operation... 7-20 7.9 Trend Memory Initialization... 7-21 7.10 SpO2 Normal Operation (Accutorr Plus with SpO2 only)... 7-21 8.0 PREVENTIVE MAINTENANCE... 8-1 8.1 Introduction... 8-1 8.2 Limitations of Physiological Simulators... 8-1 8.3 Preventive Maintenance Schedule... 8-2 8.3.1 Mechanical and Physical Visual Inspection (One Year Interval)... 8-2 8.3.2 Electrical Safety and Performance Checks (One Year Interval)... 8-2

Accutorr Plus Service Manual Introduction

Revised 09/20/07

vii

This page intentionally left blank.

viii

Accutorr Plus Service Manual Introduction

1.0 OPERATION CONTENTS OF THIS CHAPTER

Page

1.1 Introduction... 1-1 1.2 Controls and Indicators... 1-3 1.3 Operation... 1-17

1.1 INTRODUCTION This section of the Service Manual (P/N 0070-00-0429) is provided as a review of the Accutorr Plus NIBP, the Accutorr Plus NIBP with Trend Screen and the Accutorr Plus NIBP with Trend Screen and SpO2 functions and operation. The reader is encouraged to refer to the Operating Instructions, P/N 0070-00-0428, for more complete details.

Accutorr Plus, Service Manual Chapter 1 - Operation

Revised 06/25/99

1-1

This page intentionally left blank.

1-2

Accutorr Plus, Service Manual Chapter 1 - Operation

1.2 CONTROLS AND INDICATORS This section of the Service Manual identifies and describes each control and display of the Datascope Accutorr Plus NIBP, the Accutorr Plus NIBP with Trend Screen and the Accutorr Plus NIBP with Trend Screen and SpO2. For step-by-step operating instructions see Chapter 1.3, “Operation”. The following is a list of all controls, connectors and indicators, their item number and the page number. The item number refers to the call outs on the drawings within this chapter. The page number refers to the page where the description of the item can be found. CONTROL

Page #

CONTROL

Page#

30. Mute Key 31. Mute Indicator

1-10 1-11

32. Timer/Temp Key

1-11

FRONT PANEL 1.

NIBP Systolic Display

1-8

2. 3.

NIBP Diastolic Display NIBP MAP Display

1-8 1-8

4.

Pulse Rate Display NIBP/SpO2 Pulse Rate Indicator SpO2 Display Liquid Crystal Display (LCD)

1-8 1-8 1-8 1-8

5. 6. 7.

33. Interval/Elap. Time/Temp Display 1-11 34. Interval Key 1-11 35. Interval Indicator 36. Deflate Key 37. Patient Setup Key

1-11 1-12 1-12

8. Menu Key 9. LCD Up Arrow Key 10. LCD Down Arrow Key

1-8 1-8 1-8

38. Start NIBP Key 39. Start NIBP Indicator 40. Patient Size Indicators

1-12 1-12 1-12

11. Select Key 12. Print Key 13. Print Indicator

1-9 1-9 1-9

41. Hidden Key

1-12

14. Defaults Key 15. Datascope, Nellcor ® or Masimo SpO2 Connector 16. AC Power Indicator

1-9

REAR PANEL 42. Thermometer Module Connector

1-13

43. Equipotential Lug 44. AC Power Connector 45. Communications Connector

1-13 1-13 1-13

17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29.

1-9 1-9 1-9 1-9 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-11

46. Datascope Connector 47. Pole Mounting Handle and Cam 48. Recorder Module Connector

1-13 1-13 1-13

Battery Indicator NIBP Connector On/Standby Key Memory Full Indicator Delete Info. Key Data Scan Key Data Scan Indicator Room/Bed Key Bed Letter Display Room Number Display Patient Info. Down Arrow Key Patient Info. Up Arrow Key Set Alarms Key

Accutorr Plus Service Manual Chapter 1, Operation

1-9 1-9

PREDICTIVE THERMOMETER MODULE 49. Probe Cover Holder 1-14 50. Probe Chamber 1-14 51. Probe Connector 1-14 RECORDER MODULE 52. Paper Door 1-15 53. Paper Tear Edge 1-15

Revised 02/15/00

1-3

1.2.1

Front Panel

40

41

1 NIBP

39

SYS. 2

3

PATIENT SETUP

START NIBP

38

DEFLATE

36

INTERVAL

34

35

DIA. TIMER/TEMP

4

33 32

MAP

5

INTERVAL ELAP. TIME TEMP

30

ALARMS

NIBP

SET ALARMS

MUTE

6

28 26

Sp02

ROOM BED

PATIENT INFO.

SpO2

ROOM

BED

29 27 25

24

DELETE INFO.

MEMORY FULL

8

31

DATA SCAN

7

20/05 20/05 20/05 20/05 20/05

37

03:00 02:58 02:35 02:33 02:30

S / D / M 114/64 83 61 123/61 84 60 127/62 83 58 185/105 135 56 129/62 84 59

+ -

MENU

SELECT

DEFAULTS

PRINT

HOLD TO CLEAR.

22

F/C %SPO2 98.7 96 98.5 97 96 97.6 96 ---98.2 97

o

23

21 20

ON STANDBY

19

9

10

11

12

13

14

15

16

17

18

Figure 1-1 Front Panel - Accutorr Plus NIBP with Trend Screen and Datascope SpO2

1-4

Accutorr Plus Service Manual Chapter 1, Operation

40

41

1 NIBP

39

SYS. 2

3

PATIENT SETUP

START NIBP

38

DEFLATE

36

INTERVAL

34

35

DIA. TIMER/TEMP

4

33 32

MAP

5

INTERVAL ELAP. TIME TEMP

30

ALARMS

NIBP

SET ALARMS

MUTE

6

28 26

Sp02

ROOM BED

PATIENT INFO.

SpO2

31 29 27 25

24

DATA SCAN ROOM

7

BED

DELETE INFO.

MEMORY FULL

03:00 02:58 02:35 02:33 02:30

20/05 20/05 20/05 20/05 20/05

8

37

S / D / M 114/64 83 61 123/61 84 60 127/62 83 58 185/105 135 56 129/62 84 59

+ -

MENU

SELECT

DEFAULTS

PRINT

HOLD TO CLEAR.

22

F/C %SPO2 98.7 96 98.5 97 96 97.6 96 ---98.2 97

o

23

21 20

ON STANDBY

Nellcor

19

9

10

11

12

13

14

15

16

17

18

Figure 1-2 Front Panel - Accutorr Plus NIBP with Trend Screen and Nellcor® or Masimo SpO2

Accutorr Plus Service Manual Chapter 1, Operation

Revised 02/15/00

1-5

1. NIBP Systolic Display Displays the systolic blood pressure data from NIBP measurements. It is also used to display NIBP error codes and systolic alarm limits. 2. NIBP Diastolic Display Displays the diastolic blood pressure data from NIBP measurements. It is also used to display diastolic alarm limits. 3. NIBP MAP Display Displays the mean arterial pressure (MAP) information from NIBP measurements. During a measurement, it will display the cuff pressure. It is also used to display the MAP alarm limits and the inflation pressure when selecting the initial inflation pressure. 4. Pulse Rate Display Displays the pulse rate information from either the NIBP measurement or the SpO2 reading (Accutorr Plus model with SpO2). It is also used to display pulse rate alarm limits. 5. NIBP/SpO2 Pulse Rate Indicator When the pulse rate displayed is based on an NIBP measurement, then NIBP is illuminated. When the pulse rate displayed is based on an SpO2 measurement (Accutorr Plus model with SpO2), then SpO2 is illuminated. 6. SpO2 Display (Accutorr Plus model with SpO2) Displays the %SpO2 measurement information. This area is also used to display the %SpO2 alarm limits. 7. Liquid Crystal Display (LCD) (Accutorr Plus models with Trend Screen) The Liquid Crystal Display (LCD) is used to display previous measurements (trend list) for the selected patient, or a menu that controls the beep volume and alarm volume. 8. Menu Key (Accutorr Plus models with Trend Screen) This key is used to toggle between the trend list screen and the menu screen in the LCD. When the back light in the LCD is off, pressing this key turns it on. This key is also used to adjust the LCD contrast. Press and hold the key for two beeps to enter the adjustment mode. Use the Arrow keys (9 and 10) to change the contrast. 9. LCD Up Arrow Key (Accutorr Plus models with Trend Screen) This key is used to scroll the trend data so that more recent measurements are displayed in the LCD. When the back light in the LCD is off, pressing this key turns it on. This key is also used to adjust the LCD contrast when in the adjustment mode. Use the Menu key (8) to enter the adjustment mode. 10. LCD Down Arrow Key (Accutorr Plus models with Trend Screen) This key is used to scroll the trend data so that older measurements are displayed in the LCD. When the back light in the LCD is off, pressing this key turns it on. This key is also used to adjust the LCD contrast when in the adjustment mode. Use the Menu key (8) to enter the adjustment mode.

1-8

Accutorr Plus Service Manual Chapter 1, Operation

11. Select Key (Accutorr Plus models with Trend Screen) When the menu screen is displayed in the LCD, this key is used to select the menu items. When the back light in the LCD is off, pressing this key turns it on. 12. Print Key Press this key to print all stored information for the selected patient. Press to stop a printing that is in process. Press and hold this key (2 single beep tones, approx. 3 seconds) to change the print mode between Continuous and Request. When in the Continuous mode, the PRINT Indicator LED is illuminated. When loading in a new roll of recorder paper, press this key to feed the paper through the printer. 13. Print Indicator This indicator is illuminated when continuous printing of measurements is selected. 14. Defaults Key Press and hold this key (2 single beep tones, approx. 3 seconds) to reset all parameters back to the hospital default settings. This includes alarms, inflation pressure, interval, etc... When in the process of making a change to a setting, you can return to the original setting by momentarily pressing this key. To enter the User Configuration, press and hold this key (1 beep tone), while turning the unit on. See section 1.3.15 for details on default settings and User Configuration. 15. SpO2 Connector (Accutorr Plus model with Datascope, Nellcor® or Masimo SpO2) This connector is used to attach Datascope, Nellcor® or Masimo SpO2 sensors. 16. AC Power Indicator This green LED illuminates whenever AC power is applied to the unit. 17. Battery Indicator This green LED illuminates whenever the unit is operating on battery power. The LED will flash when the battery requires charging. When the LED begins flashing, approximately 30 minutes of battery time remain on the Accutorr Plus NIBP (20 minutes on the Accutorr Plus NIBP with Trend Screen and 10 minutes on the Accutorr Plus NIBP with Trend Screen and SpO2). 18. NIBP Connector This connector is used to attach specified NIBP hoses. 19. On/Standby Key This key is used to activate the unit, enabling it to begin taking measurements. The unit does not have to be “ON” for the internal battery to charge. However, the unit does need to be plugged into an AC receptacle for the battery to be charging. 20. Memory Full Indicator This LED indicator flashes when 80 - 99 of the 100 available entries of trend are used. This LED is on continuously when 100 are used. Delete measurements manually using the DELETE INFO. key or the unit will automatically delete the oldest measurement for the current patient. NOTE: The unit will also automatically delete data that is 24 hours old.

Accutorr Plus Service Manual Chapter 1, Operation

Revised 02/15/00

1-9

21. Delete Info. Key Press the Data Scan key to enable the Delete Info. key (Accutorr Plus without Trend and SpO2 only). Once enabled, press and hold this key (1 beep tone, approx. 3 seconds) to delete the most recent reading when it is displayed. When displaying any measurement, press and hold this key (2 beep tones, approx. 6 seconds) to delete all information for the currently selected patient. Press and hold at power up to delete all information for all patients. 22. Data Scan Key Press this key (1 beep tone) to view previous measurements for the selected patient on the Accutorr Plus NIBP and to enable the Delete Info. key (Accutorr Plus without Trend and SpO2 only). The LED indicator next to the key illuminates. On the Accutorr Plus NIBP, use the Patient Info. Up & Down Arrow keys (27 & 28) to scroll through the stored measurements for the selected patient. On all models of the Accutorr Plus, press and hold this key (2 beep tones, approx. 6 seconds) to scan all of the rooms and beds for stored measurements. Press the Data Scan key again to stop on a particular room/bed. Press the Data Scan key again to exit this view mode. 23. Data Scan Indicator This LED indicator is illuminated when viewing prior data. 24. Room/Bed Number Key Press this key to change the displayed Room/Bed. After pressing this key use the Patient Info. Up & Down Arrow keys (27 & 28) to change the Room/Bed. This key is also used when selecting a User Configuration item. 25. Bed Letter Display This display is used to show the current patient bed letter. It is also used to display status codes for NIBP, SpO2 and Temperature and to display User Configuration items. 26. Room Number Display This display is used to show the current patient room number. It is also used to display status codes for NIBP, SpO2 and Temperature, indicates which alarm is being set (Hi or Lo), and displays a User Configuration item. 27. Patient Info. Down Arrow Key This key is used to decrement the alarm limits when they are shown on the LED displays and to decrement the hours, minutes, month, day and year in the clock set mode. This key is also used to change the Room/Bed, to scroll through previous data and to change initial inflation pressure. 28. Patient Info. Up Arrow Key This key is used to increment the alarm limits when they are shown on the LED displays and to increment the hours, minutes, month, day and year in the clock set mode. This key is also used to change the Room/Bed, to scroll through previous data and to change initial inflation pressure.

1-10

Accutorr Plus Service Manual Chapter 1, Operation

29. Set Alarms Key This key is used to select the NIBP and SpO2 (Accutorr Plus model with SpO2) alarms to be changed. Repeated presses of this key sequences through the choices of Systolic Hi, Systolic Lo, Diastolic Hi, Diastolic Lo, Map Hi, Map Lo, Pulse Rate Hi, Pulse Rate Lo, SpO2 Hi and SpO2 Lo. After the last available parameter, the next press returns the unit to normal operation. Once the desired parameter is flashing, use the Patient Info. Up & Down Arrow keys (27 & 28) to increment or decrement the alarm values. 30. Mute Key Press this key (one beep tone), to silence the current alarm tone for 2 minutes. If a new alarm is detected during the 2 minutes, a new alarm tone will sound. Press and hold (2 beep tones, approx. 3 seconds) to permanently silence all alarm tones. Press this key again (1 beep tone), to activate alarm tones. 31. Mute Indicator This LED indicator is illuminated when the alarm tone has been silenced permanently and when the alarm volume is set to OFF. 32. Timer/Temp Key This key is used to switch between viewing the elapsed time or the temperature in the Interval/Elap. Time/Temp Display. When viewing stored measurements on the Accutorr Plus NIBP, press this key to switch between viewing the temperature and time of the measurement. 33. Interval/Elap. Time/Temp Display This displays the time, in minutes since the last successful NIBP measurement (Elap. Time is illuminated). When the Interval key is pressed, the Elap. Time changes to the current Interval setting (Interval is illuminated). When the Predictive thermometer probe is removed from its holder, the Elap. Time changes to Temp (Temp is illuminated). Either “85.0" (° F) or ”29.4" (° C) will display; this is an internal self test feature. As the Predictive thermometer is taking a measurement, the display will flash as the number increases. When the final temperature measurement is determined, the display will no longer flash and a beep tone is generated. When the AccuTemp IR thermometer is used, the temperature is not displayed until after the measurement is taken and the thermometer is placed back into its holder. This display will also show the current time and date when setting the clock. 34. Interval Key Press to enter the set time interval mode. An interval is set for automatic NIBP measurement cycles. To sequence through the interval choices of: OFF (--, when set to display graphics), CONT (Continuous), 1, 2.5, 5, 10, 15, 20, 30, 60, 120 and 240 minutes, repeatedly press the Interval key. When the desired interval is displayed in the Interval/Elap. Time/Temp Display the TIMER/TEMP key may be pressed to enter the interval setting or, the displayed setting will be entered when 15 seconds have elapsed without pressing the Patient Info. Up or Down arrow keys (27 & 28). 35. Interval Indicator When an interval setting is selected, except for Off, the Interval Indicator flashes. When the interval mode is activated the Interval Indicator illuminates continuously.

Accutorr Plus Service Manual Chapter 1, Operation

Revised 06/25/99

1-11

36. Deflate Key Press this key to stop an NIBP measurement that is in progress and deflate the cuff. A new measurement cycle will not be allowed for 10 seconds following the use of this key. The Start NIBP LED indicator is illuminated when a new measurement can begin. Press this key while in the interval mode to suspend the interval operation. 37. Patient Setup Key Press this key (1 beep tone) to select the patient size. Each time the key is pressed the patient size will change. The choices will cycle from Adult, Pediatric, Neonate, Adult, Pediatric, Neonate, etc... PRECAUTION: It is the users responsibility, when changing the room/bed, to assure the patient size and alarm settings are set as required. This key is also used to view the cuff inflation pressure for an NIBP measurement. Press and hold (2 beep tones, approx. 3 seconds) to display the current inflation pressure in the MAP display. Use the Patient Info. Up & Down Arrow keys (27 & 28) to change the cuff pressure. 38. Start NIBP Key Press this key to initiate an NIBP measurement. If a measurement is already in progress, a new measurement can not be initiated until a minimum of 10 seconds after the end of the one in progress (30 seconds when in the interval mode). The Start NIBP LED indicator is illuminated when a measurement can begin. 39. Start NIBP Indicator This LED indicator is illuminated when the Accutorr Plus is ready to initiate an NIBP measurement. 40. Patient Size Indicators One of theses LEDs illuminates to indicate the selected patient size. 41. Hidden Key To enter the Service Diagnostics mode, press and hold this key (1 beep tone) while the Accutorr Plus is powering on and running the self tests (all “8"’s displayed in the LEDs). The Service Diagnostics mode is used to initiate various performance tests that are to be done by technical service personnel only. To exit Service Diagnostics, power down the Accutorr Plus by pressing the On/Standby key.

1-12

Accutorr Plus Service Manual Chapter 1, Operation

1.2.2

Rear Panel

42

48

43 44

45

46

47

Figure 1-5 Rear Panel - All Units

42. Thermometer Module Connector Used to attached one of the optional Datascope thermometer modules (PTM or AccuTemp IR). 43. Equipotential Lug Provides equipotential bonding between hospital equipment. 44. AC Power Connector Allows for A.C. power cord connection. 45. Communications Connector Provides compatible communications to external devices and hospital’s information system. 46. Datascope Connector Used by Datascope Technical Service Personnel. 47. Pole Mounting Handle and Cam Provides the ability to quickly mount the Accutorr Plus to a rolling pole. 48. Recorder Module Connector Used to connect the optional Datascope recorder module.

Accutorr Plus Service Manual Chapter 1, Operation

1-13

1.2.3

Predictive Thermometer Module (PTM)

49

50 51 Figure 1-6 Predictive Thermometer Module

49. Probe Cover Holder Used to store a box of probe covers. 50. Probe Chamber Used to store the temperature probe when not in use. 51. Probe Connector Used to connect the thermometer probe to the PTM module.

1-14

Accutorr Plus Service Manual Chapter 1, Operation