Datex-Ohmeda

Datex-Ohmeda S5 Monitor Series

S5 Tonometry Module Technical Reference Manual Slot June 2001

Technical Reference Manual

40 Pages

Table of contents  TABLE OF CONTENTS S/5 Tonometry Module, M-TONO TABLE OF CONTENTS  i  TABLE OF FIGURES  ii  TABLE OF TABLES  ii  INTRODUCTION  1  1  2  Specifications  1.1 General specifications ...2 1.2 Parameter specifications...2 1.2.1 PgCO2 ...2  2  Functional Description  3  2.1 Measurement principle ...3 2.1.1 CO2 measurement ...3 2.2 Main components...4 2.2.1 Gas sampling system...4 2.2.2 CO2 sensor...5 2.2.3 CPU board ...6 2.3 Connectors and signals...7  3  Service Procedures  8  3.1 General service information...8 3.1.1 CO2 sensor...8 3.1.2 Factory calibration data ...8 3.1.3 Serviceable or exchangeable parts...8 3.2 Service check ...9 3.2.1 Recommended tools ...9 3.2.2 Recommended parts ...9 3.3 Disassembly and reassembly...12 3.3.1 Instructions after replacing tubings...12 3.4 Adjustments and calibrations...12 3.4.1 Pressure sensor calibration...12 3.4.2 System test ...13 3.4.3 PgCO2 calibration ...13  4  Troubleshooting  15  4.1 Troubleshooting chart ...15 4.2 Gas sampling system troubleshooting ...15  5  SERVICE MENU  16  5.1 Tonometry service menu ...17 5.2 Tonometry ...20 5.3 Press sensor calibration ...21 5.4 System test ...22 5.5 CO2 sensor ...23 5.6 Pneumatics ...25 i Document No. 800 1010-1
File Type: PDF
File Size: 680 KB
File Name: s5_tonometry_module_technical_reference_manual_slot.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions