Caleo Reprocessing Guide .pdf
Page 1
Reprocessing the Dräger Caleo
!
Please reprocess the device according to your hospital’s guidelines.
This document is for information purposes only. Please refer to the device instructions for use for
complete disassembly, assembly, cleaning and surface disinfection.
Requirement: There must be no patient in the device.
Surface disinfection with cleaning for:
•
•
•
•
Basic device/trolley
All disassembled parts
Hood and side walls (interior and exterior)
X-ray drawer
Disassembly ►
Set the incubator to the
lowest position.
2 Close and remove the
18 Set the incubator to the
17 Connect and open the
1
transfer set.
Machine cleaning and thermal disinfection:
Grommets
Fan impeller
Water tank (option)
Before starting use, ensure that all surfaces are dry and
free from disinfectant residues.
desired working height.
transfer set.
3 Remove sterile water bag or
4 Remove upper double wall
5 Remove hood.
6 Cleaning mode
16 Connect water tank or
15 Apply continuous seal and
14 Refit hood.
13
water tank (option).
sterile water bag.
!
and continuous seal.
refit upper double wall.
◄ Assembly
Only use disinfectants that have received national approval and that are suitable for the reprocessing
procedure in question. Ensure that no liquid enters the device.
91 09 009 | 20.04-1 | HQ |HO | Subject to modifications | © 2020 Drägerwerk AG & Co. KGaA
•
•
•
Page 2
Disassembly ►
7 Open side walls.
8 Remove grommets.
9 Open head and foot
10 Remove mattress.
12 Close side walls.
11 Insert grommets.
10 Close head and foot
9 Insert mattress.
11 Remove mattress tray.
12 Remove hose holder arm
13 Unlock and remove
14 Remove trough.
8 Insert mattress tray.
7 Insert hose holder arm
6 Insert and lock x-ray tray.
5 Insert trough.
15 Remove fan impeller and
16 Remove drawer.
17 Clean and disinfect basic
18 Remove display unit rotary
4 Insert fan impeller and
3 Insert drawer.
2
1
connecting piece.
connecting piece.
(option).
(option).
access ports.
access ports.
x-ray tray.
device in full.
knob and clean and
disinfect display unit.
Insert display unit rotary
knob.
◄ Assembly