User Manual Addendum
32 Pages
Preview
Page 1
Addendum for CARESCAPE ONE User Manual Software version 3
Addendum for CARESCAPE ONE User Manual English 2nd edition 2108050-001 paper © 2018-2019 General Electric Company. All rights reserved.
The information in this manual applies to the software version listed on the first page of the manual. Due to continuing product innovation, specifications in this manual are subject to change without notice. For technical documentation purposes, the abbreviation GE is used for the legal entity names, GE Medical Systems Information Technologies, Inc. and GE Healthcare Finland Oy.
2
Addendum for CARESCAPE ONE User Manual
2108050-001 2019-01-30
Contents Intended use of this addendum ... 5 Revision history ... 5 Changes to the About this manual chapter ... 5 Manual conventions... 5 Changes to the Safety chapter ... 5 Safety symbols ... 5 Cables warnings... 5 Changes to the Monitoring basics chapter ... 6 Selecting menu options with a touchscreen ... 6 Changes to the Transport use chapter... 6 Transport settings ... 6 Changes to the ECG chapter ... 13 About the 12RL™ feature... 13 Changes to the Cleaning and care chapter ... 13 Daily checks... 13 Check every 24 months ... 13 Changes to the Design, environmental, and physical specifications appendix... 13 CARESCAPE SpO2 specifications... 13 Changes to the Parameter specifications appendix... 13 SpO2 performance specifications ... 13 Changes to the Supplies and accessories appendix ... 14 About this list ... 14 Ordering information ... 15 Parameter accessories ... 15 Other accessories... 27 Supplies... 29 Changes to the Maintenance appendix ... 29 Daily checks... 29 Check every 24 months ... 29
2108050-001
Addendum for CARESCAPE ONE User Manual
3
Intended use of this addendum This addendum must be used in conjunction with the CARESCAPE ONE User Manual for software version 3. This addendum covers necessary updates to that manual.
Revision history Revision
Description
1st edition
Initial release.
2nd edition
Minor editorial changes.
Changes to the About this manual chapter Manual conventions The following terminology convention has been added to the table. Item
Description
Supplemental information
In the CARESCAPE ONE User Manual, the phrase supplemental information refers to information that appears in the appendices of the manual.
Changes to the Safety chapter Safety symbols The U.S. version of the safety ground symbol has been added to the table: Symbol
Explanation
U.S. only:
Safety ground. Remove power cord from the mains source by grasping the plug. Do not pull on the cable.
Cables warnings The following warning has been added: WARNING
2108050-001
PERSONAL INJURY. To avoid burns in an elevated temperature environment (for example, a neonatal incubator), do not place parameter cable electronics and housings in a location where contact with the patient may occur. This excludes leadwires, sampling lines, sensors, and sensor cables.
Addendum for CARESCAPE ONE User Manual
5
Changes to the Monitoring basics chapter Selecting menu options with a touchscreen The following caution has been added: CAUTION
To prevent loss of touchscreen functionality, do not touch the screen until the device is fully initialized. If all or part of the touchscreen is unresponsive after power-up, restart the device.
Changes to the Transport use chapter All paragraphs in the Transport transfer settings section have been moved to other sections. The following paragraph is moved to the Transport care unit settings section: If a CARESCAPE ONE is taken to another unit and connected to a different host monitor as an acquisition device, the CARESCAPE ONE uses the receiving host monitor’s care unit settings. For example, if the CARESCAPE ONE is disconnected from a host monitor in the ICU, the care unit settings used during transport are those from the ICU host monitor. If that same CARESCAPE ONE is then taken to the OR and connected to a different host monitor there, upon connection the CARESCAPE ONE will use the OR host monitor’s care unit settings. Any changes made during transport when the CARESCAPE ONE is not docked to a host monitor are not saved when the CARESCAPE ONE is connected to another host monitor. The following paragraphs are moved to the Returning a patient from transport section: There are limits on the amount of data that the CARESCAPE ONE provides to a different host monitor upon connection after transport from another host monitor. The transferred history is limited to 36 ECG and arrhythmia related events, 10 ST events, and 24 hours of trended data excluding high resolution trends. For more information, see the Transport settings section in this chapter, and the About continuing monitoring section in the Starting and ending monitoring chapter.
Transport settings The following sections replace the Transport settings section in the user manual:
Transport patient settings The following patient settings are transferred from the CARESCAPE ONE to the host monitor at connection when a patient case from a CARESCAPE ONE is loaded to the host monitor.
6
Addendum for CARESCAPE ONE User Manual
2108050-001
Current patient settings transferred from the CARESCAPE ONE to the host monitor ECG
● ECG 1 Lead ● ECG 2 Lead ● ECG 3 Lead ● Lead Analysis ● ST Analysis ● Va Lead Position ● Vb Lead Position
Impedance respiration
● Resp Lead
SpO2
None
● Resp Measurement on/off
● NIBP Auto Non-invasive blood pressure
Invasive blood pressure
● Channel label (if the CARESCAPE ONE channel is zeroed) ● Filter Hz (if the CARESCAPE ONE channel is zeroed) ● IABP On (if the CARESCAPE ONE channel is zeroed)
Temperature
● T1 Measurement on/off ● T2 Measurement on/off
CO2
None
If a patient is not admitted on the CARESCAPE ONE at connection, the following patient settings from the host monitor are transferred to the CARESCAPE ONE. If you make changes to any of these settings on the host monitor, the changes are continuously synchronized with the CARESCAPE ONE while the CARESCAPE ONE remains connected to the host monitor. When you take the CARESCAPE ONE on transport, these synchronized settings are used. The settings listed in the table above are included in the settings that are continuously synchronized between the devices. These settings are also listed in the table below showing the synchronized settings. Current patient settings synchronized with the host monitor and the CARESCAPE ONE ECG
2108050-001
NOTE
When a CARESCAPE ONE is connected to a host monitor, the host monitor displays the heart rate reading sent by the CARESCAPE ONE until the host monitor’s ECG algorithm has successfully learned the ECG rhythm.
NOTE
CARESCAPE ONE does not have group ST alarm settings in standalone mode. When a host monitor is using the group settings for ST alarm limits, individual ST alarm limits and on/off statuses are transferred to the CARESCAPE ONE when it is disconnected from the host monitor for transport. Upon reconnection after transport, the host monitor group settings are used again.
Addendum for CARESCAPE ONE User Manual
7
You should always check the ST alarm settings on the CARESCAPE ONE after disconnecting for transport to make sure they are appropriate for the patient being transported. ● A Fib > Alarm Priority ● A Fib > Create Snapshot ● Accelerated Ventricular > Alarm Priority ● Accelerated Ventricular > Create Snapshot ● Arrhythmia Level ● Arrhythmia paused alarm priority ● Asystole > Create Snapshot ● Bigeminy > Alarm Priority ● Bigeminy > Create Snapshot ● Couplet > Alarm Priority ● Couplet > Create Snapshot ● ECG 1 Lead ● ECG 2 Lead ● ECG 3 Lead ● ECG Lead Off alarm priority ● ECG Leads Off alarm priority ● Frequent PVCs high alarm priority ● Frequent SVCs high alarm priority ● HR alarm limits ● HR alarm on/off ● HR for V Tach/min ● HR for SVT/min ● HR/PR high/low alarm priority ● Irregular > Alarm Priority ● Irregular > Create Snapshot ● ISO Point ● J Point ● Lead Analysis ● Missing Beat > Alarm Priority ● Missing Beat > Create Snapshot ● Multifocal PVCs> Alarm Priority ● Multifocal PVCs > Create Snapshot ● Noisy ECG alarm priority ● Pacemaker Detection ● Pause > Alarm Priority
8
Addendum for CARESCAPE ONE User Manual
2108050-001
● Pause > Create Snapshot ● Pause Interval ● PR (SpO2/IP) high/low alarm delay ● Primary HR Source ● Frequent PVCs alarm limits ● Frequent PVCs alarm on/off ● QRS Width ● R on T > Alarm Priority ● R on T > Create Snapshot ● Size ● ST XXX alarm limits; where XXX = ECG site label ● ST XXX alarm on/off; where XXX = ECG site label ● ST Analysis ● ST Point ● ST Segment high/low alarm priority ● SV Tachy > Alarm Priority ● SV Tachy > Create Snapshot ● Frequent SVCs alarm limits ● Frequent SVCs alarm on/off ● SVT Length ● Trigeminy > Alarm Priority ● Trigeminy > Create Snapshot ● Va Lead Position ● Vb Lead Position ● V Brady > Alarm Priority ● V Brady > Create Snapshot ● V Fib / V Tach > Create Snapshot ● V Tach > Alarm Priority ● V Tach > Create Snapshot ● VT > 2 > Alarm Priority ● VT > 2 > Create Snapshot
Impedance respiration
● Apnea (Imped.) limit seconds ● Apnea (Imped.) alarm priority ● Cardiac Artifact alarm on/off ● Imped. Resp Smoothing ● Resp (Imped.) measurement paused alarm priority ● Resp Lead ● Resp Measurement on/off
2108050-001
Addendum for CARESCAPE ONE User Manual
9
● Resp Rate (Imped.) alarm limits ● Resp Rate (Imped.) alarm on/off ● RR (Imped.) high/low alarm priority ● RR (Imped.) high alarm delay ● RR (Imped.) low alarm delay ● Sensitivity ● Size
SpO2
● Averaging ● PR(SpO2) alarm limits ● PR(SpO2) alarm on/off ● Response ● Sensitivity ● Show Sat. Seconds ● Saturation Seconds ● SpO2 alarm limits ● SpO2 alarm on/off ● SpO2 high alarm delay ● SpO2 high alarm priority ● SpO2 low alarm delay ● SpO2 low alarm priority ● SpO2 probe off alarm priority
Non-invasive ● Cuff Size blood pressure ● Cycle Time ● Diastolic alarm limits ● Diastolic alarm on/off ● Mean alarm limits ● Mean alarm on/off ● NIBP Auto ● NIBP high/low alarm priority ● Systolic alarm limits ● Systolic alarm on/off
10
Addendum for CARESCAPE ONE User Manual
2108050-001
Invasive blood pressure
● Channel 1 and 2 systolic alarm limits ● Channel 1 and 2 systolic alarm on/off ● Channel 1 and 2 diastolic alarm limits ● Channel 1 and 2 diastolic alarm on/off ● Channel 1 and 2 mean alarm limits ● Channel 1 and 2 mean alarm on/off ● Channel label ● Filter Hz ● IABP On ● Art high/low alarm priority ● CPP high/low alarm priority ● CVP high/low alarm priority ● Fem high/low alarm priority ● FemV high/low alarm priority ● ICP high/low alarm priority ● IP High/Low alarm priority levels allowed ● P1 high/low alarm priority ● P2 high/low alarm priority ● PA high/low alarm priority ● LAP high/low alarm priority ● RAP high/low alarm priority ● RVP high/low alarm priority ● UAC high/low alarm priority ● UVC high/low alarm priority
Temperature
● T1 alarm limits ● T1 alarm on/off ● T1 Label ● T1 Measurement on/off ● T2 Label ● T2 Measurement on/off ● T2-T1 alarm limits ● T2 alarm limits ● T2 alarm on/off ● Temp high/low alarm priority
CO2
● Apnea limit seconds ● Apnea (CO2) alarm priority ● CO2 Average ● CO2 high/low alarm priority
2108050-001
Addendum for CARESCAPE ONE User Manual
11
● EtCO2 alarm limits ● FiCO2 alarm limits ● FiCO2 alarm on/off ● FiO2 level % ● N2O level % ● RR (CO2) high/low alarm limits ● RR (CO2) high/low alarm priority
Transport care unit settings If a CARESCAPE ONE is taken to another unit and connected to a different host monitor as an acquisition device, the CARESCAPE ONE uses the receiving host monitor’s care unit settings. For example, if the CARESCAPE ONE is disconnected from a host monitor in the ICU, the care unit settings used during transport are those from the ICU host monitor. If that same CARESCAPE ONE is then taken to the OR and connected to a different host monitor there, upon connection the CARESCAPE ONE will use the OR host monitor’s care unit settings. Any changes made during transport when the CARESCAPE ONE is not docked to a host monitor are not saved when the CARESCAPE ONE is connected to another host monitor. Care unit settings transferred from the host monitor to the CARESCAPE ONE ECG
● Allowed Arrh. Levels ● Arrhythmia Alarms Informational Allowed ● ECG Lead Off alarm priority levels allowed ● ECG Leads Off alarm priority levels allowed ● HR Alarms (Single or Multiple) ● HR/PR Alarms Low Priority Allowed ● Noisy ECG, Arrh. Paused alarm priority levels allowed ● Size ● ST Alarms Informational Allowed ● ST Point ● V Tach alarm priority levels allowed
Impedance respiration
● Apnea (Imped.) alarm priority levels allowed ● Resp (Imped.) Meas. Paused alarm priority levels allowed ● RR (Imped.) High/Low alarm priority levels allowed
SpO2
● SpO2 low Low Priority Allowed ● SpO2 Probe Off alarm priority levels allowed
Non-invasive ● NIBP High/Low alarm priority allowed levels blood pressure Invasive blood pressure
12
None
Addendum for CARESCAPE ONE User Manual
2108050-001
Temperature
● Configurable label ● Temperature Alarms Informational Allowed
CO2
● CO2 High/Low Escalating Allowed
Changes to the ECG chapter About the 12RL™ feature The following text has been modified: On the monitor, reconstructed (interpolated) leads can be identified by the letter d (for derived) before the lead name: dV2, dV3, dV4, and dV6.
Changes to the Cleaning and care chapter The following sections replace the sections titled Daily checks, Once a year checks, and Regular calibration checks in the user manual.
Daily checks ●
Check that the accessories, cables, cable connectors, CARESCAPE Parameters, CARESCAPE ONE, and display parts are clean and intact.
●
Check the charge of the battery.
Check every 24 months ●
Check the calibration of NIBP.
For calibration instructions, see the service manual.
Changes to the Design, environmental, and physical specifications appendix CARESCAPE SpO2 specifications The Fahrenheit operating temperature range has been corrected for CARESCAPE SpO2 – Nellcor: CARESCAPE SpO2 – Nellcor Operating temperature range
0°C to 35°C (32 °F to 95°F)
Changes to the Parameter specifications appendix SpO2 performance specifications The following SpO2 performance specifications have been updated:
2108050-001
Addendum for CARESCAPE ONE User Manual
13
Pulse oximetry saturation measurement value accuracy
Nellcor accuracy: Saturation accuracy varies by sensor type. Contact Medtronic for sensor accuracy information. Adult specifications are shown for OxiMax MAXA and MAXN sensors with the pulse oximeter. Neonate specifications are shown for OxiMax MAXN sensors with the pulse oximeter. ● Without motion: ￭
SpO2 (70 to 100%): ±2 Adult, ±2 Neonatal
￭
SpO2 (60 to 80%): ±3 Adult, ±3 Neonatal
￭
SpO2 (< 60%): Unspecified
● With motion: ￭
SpO2 (70 to 100%): ±3 Adult, ±3 Neonatal
￭
SpO2 (< 70%): Unspecified
● Low perfusion: ￭
SpO2 (70 to 100%): ±2 Adult, ±2 Neonatal
￭
SpO2 (< 70%): Unspecified
Changes to the Supplies and accessories appendix The Supplies and accessories appendix has been updated. The following sections in this addendum replace the Supplies and accessories appendix in the user manual.
About this list This list indicates the supplies and accessories that are approved, specified and available for use with the CARESCAPE ONE. To ensure patient safety, use only supplies and accessories listed in this document or recommended by GE.
14
WARNING
For detailed instructions and information regarding supplies and accessories, always refer to their own instructions for use.
WARNING
DEFIBRILLATOR PRECAUTIONS. Patient signal inputs labeled with the CF and BF symbols with paddles are protected against damage resulting from defibrillation voltages. To ensure proper defibrillator protection, use only the recommended cables and leadwires. Using other cables or leadwires may result in damage to the equipment and compromise patient and user safety.
WARNING
Use only approved accessories, including mounts, and defibrillator-proof cables and invasive pressure transducers. Other cables, transducers and accessories may cause a safety hazard, damage the equipment or system, result in increased emissions or decreased immunity of the equipment or system, or interfere with the measurement.
Addendum for CARESCAPE ONE User Manual
2108050-001
NOTE
Some of the recommended accessories may have to be ordered from the OEM manufacturer.
Refer to the user manual for complete safety information. Please note that some products are not available worldwide. You can check the availability with your local GE representative. For technical documentation purposes this list refers to the OEM manufacturers as follows: ●
CareFusion Finland 320 Oy: CareFusion
●
Covidien LLC: Covidien
●
GCX Corporation: GCX
●
Masimo Corporation: Masimo
●
Sun Fai Industrial Company: Sun Fai
Ordering information Contact your local GE representative to order supplies or accessories. Accessories without a GE part number must be ordered from the OEM manufacturer, and vice versa.
Parameter accessories ECG accessories GE Medical Systems Information Technologies, Inc. is the legal manufacturer of the following accessories. For the accessories listed below, see individual accessory labeling for additional regulatory information.
Leadwires Part number
Accessory description
2066468-001
4 Leadwire Expansion Cable, snap, AHA, 74 cm/29 in.
2066468-002
4 Leadwire Expansion Cable, snap, IEC, 74 cm/29 in.
2066468-003
4 Leadwire Expansion Cable, grabber, AHA, 74 cm/29 in.
2066468-004
4 Leadwire Expansion Cable, grabber, IEC, 74 cm/29 in.
2066468-005
4 Leadwire Expansion Cable, snap, AHA, 130 cm/51 in.
2066468-006
4 Leadwire Expansion Cable, snap, IEC, 130 cm/51 in.
2066468-007
4 Leadwire Expansion Cable, grabber, AHA, 130 cm/51 in.
2066468-008
4 Leadwire Expansion Cable, grabber, IEC, 130 cm/51 in.
Cables Part number
Accessory description
2080557-001
Cable assembly ECG 3 lead neo AHA long, 3.6 m
2080557-002
Cable assembly ECG 3 lead neo AHA short, 1.8 m
2108050-001
Addendum for CARESCAPE ONE User Manual
15
Part number
Accessory description
2080557-003
Cable assembly ECG 3 lead neo IEC long, 3.6 m
2080557-004
Cable assembly ECG 3 lead neo IEC short, 1.8 m For the following accessories, see the individual accessory product labeling for specific legal manufacturer and regulatory information (e.g., CE marking).
CareFusion leadwires GE part number
Manufacturer part number
Accessory description
403751-007
403751-007
SET LDWR RTRAN GRAB, DIN 1.2 m/48 in, 5-ld, AHA
403751-009
403751-009
SET LDWR RTRAN GRAB, DIN 1.5 m/60 in, 5-ld, AHA
403751-019
403751-019
SET LDWR RTRAN GRAB 1.2 m/48 in, 5-ld, AHA
403751-023
403751-023
SET LDWR RTRAN GRAB 1.5 m/60 in, 5-ld, AHA
403751-025
403751-025
SET LDWR RTRAN GRAB 1.5 m/60 in, 5-ld, IEC
411202-001
411202-001
Multi-Link Leadwire Set, 5-Lead, Snap, AHA, 74 cm/29 in.
411202-002
411202-002
Multi-Link Leadwire Set, 5-Lead, Snap, AHA, 130 cm/51 in.
411202-003
411202-003
Multi-Link Leadwire Set, 5-Lead, Snap, IEC, 74 cm/29 in.
411202-004
411202-004
Multi-Link Leadwire Set, 5-Lead, Snap, IEC, 130 cm/51 in.
411203-001
411203-001
Multi-Link Leadwire Set, 3-Lead, Snap, AHA, 74 cm/29 in.
411203-002
411203-002
Multi-Link Leadwire Set, 3-Lead, Snap, AHA, 130 cm/51 in.
411203-003
411203-003
Multi-Link Leadwire Set, 3-Lead, Snap, IEC, 74 cm/29 in.
411203-004
411203-004
Multi-Link Leadwire Set, 3-Lead, Snap, IEC, 130 cm/51 in.
412681-001
412681-001
Multi-Link Leadwire Set, 5-lead, grabber, AHA, 74 cm/29 in.
412681-002
412681-002
Multi-Link Leadwire Set, 5-lead, grabber, AHA, 130 cm/51 in.
412681-003
412681-003
Multi-Link Leadwire Set, 5-lead, grabber, IEC, 74 cm/29 in.
412681-004
412681-004
Multi-Link Leadwire Set, 5-lead, grabber, IEC, 130 cm/51 in.
412682-001
412682-001
Multi-Link Leadwire Set, 3-lead, grabber, AHA, 74 cm/29 in.
412682-002
412682-002
Multi-Link Leadwire Set, 3-lead, grabber, AHA, 130 cm/51 in.
412682-003
412682-003
Multi-Link Leadwire Set, 3-lead, grabber, IEC, 74 cm/29 in.
412682-004
412682-004
Multi-Link Leadwire Set, 3-lead, grabber, IEC, 130 cm/51 in.
421930-001
421930-001
Multi-Link Leadwire Set, 6-lead, snap, AHA, 74 cm/29 in.
421930-002
421930-002
Multi-Link Leadwire Set, 6-lead, snap, AHA, 130 cm/51 in.
421931-001
421931-001
Multi-Link Leadwire Set, 6-lead, snap, IEC, 74 cm/29 in.
421931-002
421931-002
Multi-Link Leadwire Set, 6-lead, snap, IEC, 130 cm/51 in.
421932-001
421932-001
Multi-Link Leadwire Set, 6-lead, grabber, AHA, 74 cm/29 in.
421932-002
421932-002
Multi-Link Leadwire Set, 6-lead, grabber, AHA, 130 cm/51 in.
421933-001
421933-001
Multi-Link Leadwire Set, 6-lead, grabber, IEC, 74 cm/29 in.
16
Addendum for CARESCAPE ONE User Manual
2108050-001
GE part number
Manufacturer part number
Accessory description
421933-002
421933-002
Multi-Link Leadwire Set, 6-lead, grabber, IEC, 130 cm/51 in.
2052104-001
2052104-001
3-LEAD, SNAP, IEC, 100 cm/39 in.
2052104-002
2052104-002
5-LEAD, SNAP, IEC, 100 cm/39 in.
2052104-003
2052104-003
5-LEAD, SNAP, IEC, 75 cm/29 in.
2052104-005
2052104-005
3-LEAD, SNAP, AHA, 100 cm/39 in.
2052104-006
2052104-006
5-LEAD, SNAP, AHA, 100 cm/39 in.
2052104-007
2052104-007
5-LEAD, SNAP, AHA, 75 cm/29 in.
2052133-001
2052133-001
3-LEAD, GRABBER, IEC, 100 cm/39 in.
2052133-002
2052133-002
5-LEAD, GRABBER, IEC,, 100 cm/39 in.
2052133-003
2052133-003
5-LEAD, GRABBER, IEC, 75 cm/29 in.
2052133-005
2052133-005
3-LEAD, GRABBER, AHA, 100 cm/39 in.
2052133-006
2052133-006
5-LEAD, GRABBER, AHA, 100 cm/39 in.
2052133-007
2052133-007
5-LEAD, GRABBER, AHA, 75 cm/29 in.
CareFusion electrodes GE part number
Manufacturer part number
Accessory description
2009101-403
2009101-403
Radiolucent Neonatal Cloth Monitoring Snap Electrodes, T832C
2009101-404
2009101-404
Radiolucent Neonatal Cloth Monitoring Electrodes w/Preattached Ldwrs, SR15-3 (B,W,R)
2009101-406
2009101-406
Radiolucent Neonatal Cloth Monitoring Electrodes w/Preattached Ldwrs, SR15-3 (Y,G,R)
2009109-003
2009109-003
Clear Tape Round, Solid Gel, T915-3
2009109-005
2009109-005
Clear Tape Round, Solid Gel, T915-5
2009109-050
2009109-050
Clear Tape Round, Solid Gel, T915-50
2009110-003
2009110-003
Foam Round Solid Gel, T715-3
2009110-005
2009110-005
Foam Round Solid Gel, T715-5
2009110-050
2009110-050
Foam Round Solid Gel, T715-50
2009110-050R
2009110-050R
Foam Round, Radiolucent, Solid Gel, T717C-50
2009110-050W
2009110-050W
Foam Round WetGel, T715W-50
2009110-150
2009110-150
Foam Round Solid Gel, T717-50
2009111-050
2009111-050
Cloth Round Solid Gel, T815-5
2009111-150
2009111-150
Cloth Round Solid Gel, T816-50
2014768-001
58542
Electrodes, ECG, SilverTRACE, MULTI P20MO, Ad, Foam Oval, Tab, 300/bx
2014775-001
58533
Electrodes, ECG, SilverTRACE, FIRST P28MO, Ad, Foam Rect, 300/bx
2108050-001
Addendum for CARESCAPE ONE User Manual
17
GE part number
Manufacturer part number
Accessory description
2014776-001
58544
Electrodes, ECG, SilverTRACE, FIRST P28MO, Ad, Foam Rect, 10/pouch, 1600/bx
2014777-001
58534
Electrodes, ECG, SilverTRACE, SOFT P55MO, Ad, Foam Rnd, 30/pch, 300/bx
2014780-001
58539
Electrodes, ECG, SilverTRACE, SOFT STRESS PS50MO, Ad, Foam Rnd, 300/cs
2014782-001
58540
KIT ELECTRODE SOLID GEL P40CL 300 PK
2014783-001
58541
Electrodes, ECG, SilverTRACE, WINDOW P50TR Vinyl Tape Rnd, 30/pch 300/cs
2014785-001
58549
Electrodes, ECG, SilverTRACE WINDOW P50TR Vinyl Tape Rnd, 7/pch, 350/cs
CareFusion cables and leadwire accessories GE part number
Manufacturer part number
Accessory description
414370-001
414370-001
Multi-Link 5-Lead DIN Converter
414371-001
414371-001
Multi-Link 3-Lead DIN Converter
414763-002
414763-002
Multi-Link Leadwire Separator, 3/5-Lead
416212-001
416212-001
Multi-Link Bedsheet Clip
Nellcor OxiMax accessories Nellcor and OxiMax are trademarks of Covidien LLC. For the following accessories, see the individual accessory product labeling for specific legal manufacturer and regulatory information (e.g., CE marking).
Non-adhesive specialty sensors GE part number
Manufacturer part number
Accessory description
2072896-001
SC-PR
Preemie SoftCare non-adhesive sensor, SC-PR, <1.5 kg
2072897-001
SC-NEO
Neonate SoftCare non-adhesive sensor, SC-NEO, 1.5-5 kg
2072898-001
SC-A
Adult SoftCare non-adhesive sensor, >40 kg
Single patient use sensors GE part number
Manufacturer part number
2069116-001
MAXFAST
Accessory description Adult/Pediatric Forehead Sensor, MAXFAST, >10 kg
70124027
MAXA
Finger Sensor, Adult, MAX-A, >30 kg (>66 lbs)
2028117-001
MAXAL
Adult Finger Sensor, MAXA, >30 kg, Long
70124032
MAXN
Toe/Foot Sensor, Neonatal/Adult, MAX-N, <3 kg or >40 kg (<6.6 or >88 lbs)
70124026
MAXI
Toe Sensor, Infant, MAX-I, 3-20 kg (6.6-44 lbs)
18
Addendum for CARESCAPE ONE User Manual
2108050-001
GE part number
Manufacturer part number
Accessory description
70124022
MAXP
Finger Sensor, Pediatric, MAX-P, 10-50 kg (22-110 lbs)
2106258-006
MAXR
Adult Nasal Sensor, MAXR, >50 kg
Two-piece sensors GE part number
Manufacturer part number
Accessory description
2106258-001
A
Adult OxiCliq single use, two-piece adhesive sensor, >30 kg
2106258-002
N
Neonatal/Adult OxiCliq single use, two-piece adhesive sensor, <3 kg or >40 kg
2106258-003
I
Infant OxiCliq single use, two-piece adhesive sensor, 3-20 kg
2106258-004
P
Pediatric OxiCliq single use, two-piece adhesive sensor, 10-50 kg
2106258-005
OC-3
OxiCliq Sensor Cable 3 ft
Manufacturer part number
Accessory description
Reusable sensors GE part number 70124021
DS100A
Finger Sensor, Adult, DS100A, >40 kg (>88 lbs)
70124035
OXI-A/N
Reusable sensor, Neonatal/Adult,<3 kg or >40 kg
414248-001
OXI-P/I
Toe Oxiband Sensor, Pediatric/Infant, OXI-P/I, 3-40 kg (6.6-88 lbs)
Reusable multi-site sensors GE part number
Manufacturer part number
Accessory description
70124033
D-YS
Multisite Sensor, Neonatal/Pediatric/Adult, D-YS, >1 kg (>2.2 lbs)
70124034
D-YSE
Ear-Clip, Pediatric/Adult, D-YSE, >30 kg (>66 lbs) for use with 70124033
2072900-001
D-YSPD
Pediatric clip, D-YSPD, 3-40 kg, for use with 70124033
Reusable sensor wraps GE part number
Manufacturer part number
Accessory description
2016130-001
ADH-A/N
Adhesive Wrap for use with OXI-A/N (70124035) and D-YS (70124033)
2016131-001
ADH-P/I
Adhesive Wrap for use with OXI-P/I (414248-001) and D-YS (70124033)
Masimo SpO2 accessories For the following accessories, see the individual accessory product labeling for specific legal manufacturer and regulatory information (e.g., CE marking).
2108050-001
Addendum for CARESCAPE ONE User Manual
19
Masimo LNCS sensors GE part number
Manufacturer part number
Accessory description
2027253-001
1859
Finger Sensor, Adult, LNCS-Adtx, >30kg (>66lbs)
2027254-001
1860
Finger Sensor, Pediatric, LNCS-Pdtx 10-50kg (22-110lbs)
2027258-001
1863
Finger Sensor, Adult, LNCS DC-I, >30kg (>66lbs)
2027259-001
1864
Finger Sensor, Pediatric, LNCS DC-IP, 10-50kg (22-110lbs)
2027261-001
1895
Ear Sensor, Adult, LNCS TC-I, >30kg (>66lbs)
2051068-001
2328
Masimo LNCS Adhesive sensor, LNCS Inf, Infant (20/box)
2051069-001
2329
Masimo LNCS Adhesive sensor, LNCS Neo, Neonatal (20/box)
2051070-001
2330
Masimo LNCS Adhesive sensor, LNCS-Neo-Pt, Neonatal (20/box)
2066333-001
2317
Adult adhesive sensor, LNCS Adtx-3, 3 ft
2066334-001
2318
Pediatric adhesive sensor, LNCS Pdtx-3, 3 ft
2066335-001
2319
Infant adhesive sensor, LNCS Inf-3, 3 ft
2066336-001
2320
Neonate adhesive sensor, LNCS Neo-3, 3 ft
2066338-001
2653
Adult reusable finger sensor, LNCS DBI
2066339-001
2258
Reusable multisite sensor, LNCS YI
Masimo M-LNCS sensors GE part number
Manufacturer part number
2068423-048
2508
M-LNCS Adtx, Adult adhesive sensor, 18 in.
2068423-050
2511
M-LNCS Pdtx-3, Pediatric adhesive sensor, 3 ft
2068423-051
2512
M-LNCS Inf, Infant adhesive sensor, 18 in.
2068423-053
2514
M-LNCS Neo, Neonate adhesive sensor, 18 in.
2068423-055
2516
M-LNCS NeoPt, Sensitive skin neonate adhesive sensor, 18 in.
2068423-057
2518
M-LNCS NeoPt-500, Neonate non-adhesive sensor, 18 in.
2068423-058
2521
M-LNCS Trauma, Adult adhesive sensor
2068423-059
2519
M-LNCS Newborn Neonatal, Newborn neonatal adhesive sensor
2068423-060
2520
M-LNCS Newborn Infant/Pediatric, Newborn Infant adhesive sensor
2068423-062
2502
M-LNCS DCIP, Pediatric Reusable finger sensor
2068423-064
2503
M-LNCS TC-I, Reusable ear sensor
2068423-065
2505
M-LNCS, YI, Multisite Reusable Sensor, 3 ft.
2068423-066
2504
M-LNCS TF-I, Reusable forehead sensor
20
Accessory description
Addendum for CARESCAPE ONE User Manual
2108050-001
Masimo cables GE part number
Manufacturer part number
Accessory description
2106257-001
2056
Masimo 25-pin LNC-10 LNCS cable, 10 ft
2106257-002
2055
Masimo 25-pin LNC-4 LNCS cable, 4 ft
2106257-003
2356
Masimo 25-pin LNC-1 LNCS cable, 1 ft
2106257-006
2404
Masimo 25-pin RC-12 M-LNCS cable, 12 ft
2106257-008
2406
Masimo 25-pin RC-4 M-LNCS cable, 4 ft
2106257-010
2405
Masimo 25-pin RC-1 M-LNCS cable, 1 ft
TruSignal SpO2 accessories GE Healthcare Finland Oy is the legal manufacturer of the following accessories. For the accessories listed below, see individual accessory labeling for additional regulatory information. Part number
Accessory description
OXY-HB
Replacement headband
OXY-RT
Replacement adhesive tape (blue)
OXY-RTB
Replacement adhesive tape (bears)
OXY-RTW
Wide adhesive replacement tape
OXY-RWL
Foam wrap replacement, large
OXY-RWM
Foam wrap replacement, medium
OXY-RWS
Foam wrap replacement, small
OXY-SND
Infant foam sandal, 2-7.7 kg (4.4-17 lbs)
TS-AAW-10
TruSignal Adult Adhesive Wrap Sensor, ≥20 kg (≥44 lbs)
TS-AAW-25
TruSignal Adult Adhesive Wrap Sensor, ≥20 kg (≥44 lbs)
TS-AF-10
TruSignal AllFit sensor, adult-pediatric-infant-neonate, 0.5 m/1.6 ft
TS-AF-25
TruSignal AllFit sensor, adult-pediatric-infant-neonate, 0.5 m/1.6 ft
TS-AP-10
TruSignal adult/pediatric sensors, 0.3 m/1 ft, 20 to 50 kg (44 to 110 lb) or ≥50 kg (≥110 lb)
TS-AP-25
TruSignal adult/pediatric sensors, 0.3 m/1 ft, 20 to 50 kg (44 to 110 lb) or ≥50 kg (≥110 lb)
TS-E-D
TruSignal Ear Sensor, adult-pediatric, 1 m/3.3 ft, ≥10 kg (≥22 lbs)
TS-F-D
TruSignal Finger sensor, adult-pediatric, 1 m/3.3 ft, ≥20 kg (≥44 lbs)
TS-PAW-10
TruSignal Pediatric Adhesive Wrap Sensor, 3 to 20 kg (6.6 to 44 lbs)
TS-PAW-25
TruSignal Pediatric Adhesive Wrap Sensor, 3 to 20 kg (6.6 to 44 lbs)
TS-SA-D
TruSignal FingerTip sensor, 1 m/3.3 ft, >30 kg (>66 lbs)
TS-SE-3
TruSignal Sensitive Skin sensor, adult-pediatric-infant-neonate, 1 m/3.3 ft
TS-SP-D
TruSignal PediTip sensor with GE connector, 1 m/3.3 ft, 15 to 30 kg (33 to 66 lbs)
TS-W-D
TruSignal Wrap sensor, adult-pediatric, 1 m/3.3 ft, ≥3 kg (≥6lbs)
2108050-001
Addendum for CARESCAPE ONE User Manual
21