GyrusACMI G400 Workstation AS-NZS 3551 Biomedical Inspection Guide May 2012

From:

Olympus Australia Pty Ltd Service Centre – Medical 31 Gilby Road Mt Waverley VIC 3149 Tel: 1300 132 992

G y r u s A C M I G 4 0 0 Wo r k s t a t i o n ASNZS 3551 – Biomedical Inspection To facilitate routine ASNZS3551 Inspection of the GyrusACMI G400 Workstation, Olympus Australia Pty Ltd are now able to supply a test lead which temporarily places the electro-surgical generator into “Biomedical Test” mode. This allows a practiced Biomedical department to perform RF output performance testing. Part Code:

BTK-G400

Qty:

1 per packet

Cost:

$29.75 ex GST

Price correct as 1st may, 2012

The user of such test cable is strongly recommended to read the Section 13 of User Manual which includes information about which of the unterminated leads should be used to when measuring RF output of the different waveform modalities. A Biomedical Information Manual is also available on request from the Service Department, but does not preclude the recommended reading of the User Manual.

Further queries can be directed to the Service Centre – Electronics Workshop via 1300 132 992

Olympus Australia Pty Ltd 31 Gilby Road Mt Waverley VIC 3149 office +61-3-9265-5400 fax +61-3-9543-1350 www.olympus.com.au

www.gyrusacmi.com