Filac Fastemp Operating and Service Manual

Than k you for purchasing the Filac* FasTemp* Electronic Thermometer. With proper care, th is device will provide years of precision service.

I In the event that it becomes necessary to return a unit for service, please follow these instructions: 1. Call one of the appropriate phone numbers listed below for an Authorized Return Number and shipping instructions. 2. Pack the instrument carefully and ship insured parcel to the appropriate location: United States Tyco Healthcare Group LP 98.6 Faichney Drive Watertown, NY 13601 Phone: 1-800-448-01 90 or 315-788-5246

Outside US & Canada Tyco Healthcare Group LP 20 Garryduff Road Ballymoney, BT53 7AP, UK Phone: 001-44-12656-63234

Canada Tyco Healthcare Canada 7500 Trans Canadian Hwy Pointe-Claire, QC H9R 5H8 Phone: 1-877-664-8926

Visit our website at: www.TycoHealthCare.com

Portable Electronic Equipment Patents Pending

2

FILAC* FASTEMP* Electronic Thermometer.

J

English Table of Contents Page

Section

I.

General Information ... . ... ... ... 4

II.

Safety and Warnings ... . ... .. ... . ... 5

III.

Icon Identification ... . ... ... ... . ... 6

IV.

Instructions For Use ... .. ... ... . .. . ... 7 Probe Covers - Applyi ng & Removing . ... . ...7 Changing Isolation Chambers & Probes .. ... . .. ... ...7 Oral & Axillary Temperature Taking ... ... ... .8 Rectal Temperature Taking ... . ... . ... 10 Direct Mode . ... . .. ... ... . ... 11 Recall Last Temperature ... ... ... .. .. ... .11 Pulse Timer Mode .. ... ... . ... . ... . .. . .. ... ... 12 Biotech Setup Options . ... . ...13

V.

Cleaning & Sterilization . ... . ... 12

VI.

Battery Replacement / Installation ... .. ... . ... .. ... 14

VII.

Mounting Instructions ... ... ... ... 14

41'

i< ~

VIII. Anti-Theft Features & Options ... . ... 14 IX.

Troubleshooting . ... 15

X.

Specifications . ... .. ... . ... 16

XI.

Customer Service ... 19

XII.

Warranty ... . .. .. ...21

FILAC* FASTEMP* Electronic Thermometer

3

I. General Information 1. The Filac* FasTemp* Electronic Thermometer is a fast, highly accurate and simple to use clinical instrument for measuring patient temperatures by Oral, Axillary or Rectal means. 2. The CE symbol indicates that this device is manu­ factured in compliance with all standards stated in the MOD Directive. 3. The electromagnetic compatibility of this device has been verified by test according to EN60601-1-2: 1993 requirements . 4. This device requ ires no user maintenance other than replacement of expired battery.

Features • Fast temperature measurement (typically 4 to 10 seconds) which meet both European and American accuracy standards. • Measurement range: 30°C to 43°C; 85°F to 110°F. • Push button alternates Celsius/Fahrenheit scale . • Audible indication of completion ("beep" sound). • Interchangeable, color-tinted Isolation Chambers with matching probes. Herps keep Probe Covers and probes together for aidi n;g in infection con- ;. tro!. (BLUE-ORAUAXIL4ARY only; RED-REC­ TAL only). '' • Easily wiped clean. • Uses standard disposable 9-volt alkaline battery or accepts optional long-life Lithium battery. • LOW BATIERY and DEAD BATIERY indicators. • IIAuto-Off" conserves battery life. • IIAuto-On when probe is withdrawn from sheath. ll

4

FILAC* FASTEMP* Electronic Thermometer

• Last temperature RECALL. • 15 and 30 second pulse TIMER. • "See-Through" Isolation Chamber & box window for easy viewing/counting of remaining probe Covers. • Easy to read LCD display with backlight.

II. Safety and Warnings CAUTION: Federal law (USA) restricts this device to sale by or on the order of a physician. 1. Read this booklet thoroughly before using the Filac* FasTemp*. 2. Do not use this device near flammable anesthetics. Not suitable for use in the presence of flammable anesthetic mixture with air, oxygen or nitrous oxide. 3. DO NOT use this thermometer without first installing a fresh Filac* FasTemp* probe cover. 4. Use only Filac* FasTemp* probe covers with this device (To reorder, see pg. 20) . Use of any other probe cover will result in erroneous temperature readings. 5. The device and probe covers are NON-STERILE. Do not use on abraded tissue. 6. To limit cross contamination, use BLUE devices only for ORAL and AXILLARY temperature taking. 7. Use RED devices only for RECTAL temperatures. 8. Thoroughly dry electrical contacts on both probe and thermometer after washing or device may fail to functi~n properly. 9. For re-calibration, seNice or integrity checks, refer to a qualified Biomedical -'" Technician or return to manufacturer. 1O. Do not open unit. No user-serviceable parts inside. Opening of device may affect calibration and voids warranty. To replace battery, see pg. 14. 11. Disposal of used Probe Covers must be performed in accordance with cur­ rent medical practices or local regulations regarding disposal of infectious, biological medical waste. 12. Dispose of battery in a manner consistent with local environmental and institu­ tional policy for Lithium or Alkaline battery disposal. 13. Dispose of old battery-powered electronic equipment in a manner consistent with institutional policy for expired equipment disposal. FILAC* FASTEMP* Electronic Thermometer

5

14. Cleaning frequency and practices must be consistent with institutional policy for cleaning of non-sterile devices. See pg. 12. 15. See icon descriptions below for additional safety information. 16. Device to be used by trained personnel. NOTE: This device is designed to minimize the effects of uncontrolled electromag­ netic interference and other types of interference. Avoid use of other equipment that causes erratic operation or degradation in the performance of this device.

III. Icon Identification Timer mode. 15-30 seconds.

ORAL temp. mode. Works only with BLUE Probe and Isolation Chamber.

Return unit to Anti-theft base

q'------"l_ Low battery SYSTEM ERROR Sevice Unit.

x

r=J Dead battery

Probe missing or damaged

+

Out of range high temp

t

Out of range low temp

...

Type SF equipment

AX ILLARY temp. mode. Works only with BLUE Probe and Isolation Chamber.

~ DIR

RECTAL temp. mode. Works only with RED Probe and Isolation Chamber.

DIRECT mode. (Non-Predictive) Automatic when temperature is out of range or not predictive.

Thi, Device P,ot; cted ~j ANTI-THEFT SYSTEM

VL US ~

C

MEDICAL ELECTRICAL EQUIPMENT UL 2601-1 CAN/CSA C22.2 NO 601.1

Underwriters' . Laboratory Product Safety compliance mark

47DA

~ 9V 6LR611

Battery Access. Replace with size 6LR61.

Patents pending World-wide patents pending. 6

SN

Serial Number

d

Date of Manufacture

Anti-Theft Warning ANTI-THEFT SYSTEM Thermometer will not work unless returned to this base ~hen indicated.

~~~:ffi

F1lAC

K ondall

°1fi!-*.r.i!!!JP

Anti-Theft Warning

Electronic Thermometer Reorder number for Filac* FasTemp* elec­ tronic Thermometer

&

EXPLOSION HAZARD IF USED WITH FLAMMABLE ANESTHETICS. CONSULT ACCOMPANYING DOCUMENTS.

Hazard Warning

FILAC* FASTEMP* Electronic Thermometer

IV. Instructions For Use Probe Covers- Applying & Removing 1. Open probe cover box by lifting tab at top corner. 2. To view number of remaining probe covers, continue pulling tab to remove side panel. 3. Insert box of probe covers into top of Isolation Chamber. To aid infection control, never switch boxes between blue and red isolation chambers . Also, never switch probes between blue and red isolation chambers. Keep like colors together. 4. Remove the probe from its sheath. This automatically turns on the thermometer. 5. A moving picture is momentarily displayed before applying or removing Probe Covers, to help rem ind the user to apply or remove a Cover. 6. Insert the probe end into a cover in the box. Push the handle firmly until you feel the cover "snap" into place . 7. Wait fo r a short "beep." 8. Take appropriate temperature (oral , axillary or rGctal). 9. Eject used cover into bio-waste container by pressing top button . 10. Remove , discard and replace box when empty.

Changing Isolation Chambers and Probes 1. For aiding in infection control, use only the BLUE probe and BLUE Isolation Chamber for ORAL and AXILLARY temperature taking . The RED probe and RED Isolation Chamber must only be used for RECTAL temperature taking . 2. Do not attach a RED probe to a BLUE Isolation Chamber or vice-versa.

FILAC* FASTEMP* Electronic Thermometer

7

3. To remove or replace any Isolation Chamber/Probe unit, grasp Isolation Chamber from behind as shown at right. Using index finger, pull back on Locking Tab at top right, and slide unit up to pull off. 4. To replace, align rails and slide new Isolation Chamber down until locking tab "clicks" into place. 5. Probe is connected to the rmometer auto­ matically. 6. To change probes, pull forward on the top of the connector (Isolation Chamber end of the cord), rotating neck out of its locked position . Slide down to remove. Attach new, matching BLUE or RED probe in reverse manner. Snap neck firmly in place. TO INSTALL PROBE

TO REMOVE/REPLACE PROBE

l-SLIDE IN / UP

IQ­- ­ ,II

Oral & Axillary Temperature Taking 1. Make certain that the BLUE Isolation Chamber/Probe unit is attached. 2. Withdraw the probe and apply a probe cover. Thermometer turns on auto­ matically. 8

FILAC* FASTEMP* Electronic Thermometer

c

3. An icon identifying ORAL or AXILLARY mode is displayed. The RECTAL icon can­ not be displayed. 4. Press the ROUND button on -the front panel to select either the ORAL or AXIL­ LARY mode.

5. Wait for a short "beep." This indicates the unit is ready to take a temperature. 6. For ORAL temperatures, insert the probe tip into the sublingual pocket next to the frenulum linguae, (vertical fold of tissue in middle of tongue), on one side or the other, toward the back of the mouth. Note: Accurate readings can only be obtained in one of these two "heat pocket" locations as shown. Temperatures in other mouth locations could result in inaccurate temperature readings. 7. Patient's mouth must be CLOSED.

~-

8. For AXILLARY tempera­ tures, have the patient raise the arm, then place the probe tip in the axilla. Press gently to assure good contact. 9. Have the patient then lower ,. the arm. Hold the probe almost parallel to the arm as shown. 10. If two short beeps are heard, it means the unit switched to DIRECT (slow) mode for this temperature only. See page 11 for DIRECT mode operation.

11. A "Iong beepll is sounded when measurement is complete and the final temperature is displayed. FILAC* FASTEMP* Electronic Thermometer

9

12. To change between Celsius and Fahrenheit scales, press the OF / °C but­ ton. Press again as needed. 13. Eject used cover into a bio-waste container by pushing top button. 14. After returning the probe to its sheath, the temperature is stored for recall until the probe is once again withdrawn. If the probe is returned to its sheath before the Iflong beep" is heard , no temperature will be stored for the recall function.

Rectal Temperature Taking 1. Make certain that the RED Isolation Chamber/Probe unit is attached. 2. Withdraw the probe and apply a probe cover. Thermometer turns on automatically.

e

3. An icon identifying RECTAL mode is always displayed pro­ vided the RED Isolation Chamber/Probe unit is attached. Pressing the ROUND button on the front panel to change modes has no effect. 4. Wait for a "short beep." This indicates the unit is ready to take a tempera­ ture. 5. Insert the probe into the patient's rectum. To ensure proper tissue contact, angle the probe slightly after insertion. 6. Depth of insertion is recommended at 1/2" to 3/4/1 (12 mm - 19 mm) for adults and 1/4" to 1/2" (6 mm - 13 mm) for children. 7. If two short beeps are heard, it means the unit switched to DIRECT (slow) mode for this temperatu re only. See page 11 for DIRECT mode operation . 8. A "long beep" is sounded wnen measurement is complete and the final tem­ perature is displayed. ' ' 9. To change between Celsius and Fahrenheit scales, press the °F/oC button. Press again as needed. 10. Eject used cover into a bio-waste container by pushing top button. 11. After returning the probe to its sheath, the temperature is stored for recall until the probe is once again withdrawn. If the probe is returned to its sheath before the Iflong beeplf is heard, no temperature will be stored for the recall function.

10

FILAC* FASTEMP* Electronic Thermometer

Direct Mode 1. Filac* FasTemp* normally operates in fast PREDICTIVE mode for accurate temperature measuring. In certain cases, such as with a hypothermic patient, the thermometer will automatically shift to DIRECT (slow) mode and will then act as a temperature monitor. 2. The Filac* FasTemp* can be set to only operate in DIRECT mode (disable PREDICTIVE mode) . See page 13 to lock DIRECT mode on . 3. In 01 RECT mode this device requires several minutes to reach equilibrium and display patient temperature. 4. Turtle icon will be continuously displayed whenever the ther­ mometer is functioning in DIRECT mode.

.a DIR

5. To change between Celsius and Fahrenheit scales, press the of / °C button . Press again as needed.

+

6. UP or DOWN arrow will also display in the temperature line whenever current temperature reading is out of range, either HIGH or LOW, respectively.

t

7. DIRECT mode auto feature is always functional regardless of attachment to RED or BLU E isolation chamber/ Probe units. 8. A "long beep" is sounded when measurement is complete and the final tem­ ,perature is displayed. 9. After returning the probe to its sheath, the temperature is stored for recall until the probe is once again withdrawn. If the probe is returned to its sheath before the "long beep" is heard, no temperature will be stored for the ~ recall function.

Recall Last Temperature 1. After each temperature measurement, a "long beep" is heard. That means the temperature has been stored and is available for recall. This tempera­ ture can be recalled after the probe is returned to its sheath. 2. To recall this temperature, press OF / °C button on the front panel. 3. Press again to change between Celsius and Fahrenheit scales, as many times as desired. , 4. Withdrawing probe from sheath cancels last temperature memory.

FILAC* FASTEMP* Electronic Thermometer

11

Pulse Timer Mode 1. The Filac* FasTemp* also may be used to measure patient's pulse rate. 2. To access, do not remove probe from sheath. 3. Press the ROUND button on front panel. Clock icon is dis­ played. 4. Press the ROUND button a second time to start the seconds timer and lapsed time display. 5. A "beep" is sounded at 15 seconds and again at 30 seconds. The count stops at 30 seconds. Pressing ROUND button again will restart timer cycle at any time. 6. Timer mode will turn off automatically in 5 seconds or whenever the probe is removed from the sheath.

v. Clean ing and Sterilization 1. The entire device may be easily wiped clean. Water temperature should not exceed 130 F (55 C). Do not submerge or soak under water.. 0

0

2. A mild detergent may be added to water. Use of cleaners such as Spray­ Nine, Phisohex, Hibiclens, or Vesta-Syde may result in damage to the ther­ mometer case. 3. Use of a 10: 1 water and hypoclorite mixture or a damp isopropyl alcohol wipe occasionally, is acceptable. Prolonged and repeated use of these chemicals may result in damage to the thermometer case and display area. 4. Use of a cloth or sponge is recommended for cleaning. Abrasive pads may result in damage to the tl1ermometer case and display area. /1'.

5. This thermometer is providet:1-non-sterile. DO NOT use ethylene oxide gas, heat, autoclave, or any other harsh methods to sterilize this unit. 6. Isolation chambers may be replaced inexpensively instead of cleaning . See pg. 20 - 21 for ordering information. 7. After cleaning the unit, shake the probe handle to drain out any excess solution. Thoroughly dry the electrical contacts on both probe and ther­ mometer. If the device fails to function properly see TROUBLESHOOTING on pg.15.

12

FILAC* FASTEMP* Electronic Thermometer

Biotech OPTIONS SET-UP Mode 1. To enter SET-UP mode, press and hold BOTH BUTTONS for 4 seconds . A "beep" is heard and a dash scrolls in the display. 2. Thermometer is now in SET-UP Mode. Follow the chart below to program available functions. 3. To exit SET-UP Mode and resume normal operation, press both buttons at the same time and hold for 1 full second. Last settings are saved. 4. SET-UP Mode also exits automatically after 20 seconds of inactivity. Last settings are saved. Each Press of Set Function

Press Button

0

DIRECT MODE lock on flock off (automatic)

1 Time

English Language Icon Segments

2 Times

~

What You See or Hear

Toggles in Display

..

lliJD

All English Icon Segments Blink: ORl-AX-REC-DIR

lliJ D

Turtle/DIR Icon Blinks

(on)

(on)

Sounds

3 Times

Beeping Sound Heard

' 4 TimeS

Return to Base Icon Blinks v ~

~L!J

(off)

lliJD (on)

ANTI-THEFT Set possible No. of Temperatures or Turn Off

(off)

(off)

lliJ ,n lliJ en lliJ lliJ D lliJD 7n ILl

(on) (on)

eLI

(on)

_'LI

(on)

~LI

""

(off)

Back-lighting

5 Times

Backlight Blinks

(on) FILAC* FASTEMP* Electronic Thermometer

(off) 13

VI. Battery Replacement I Installation 1. To access battery, remove isolation chamber by depressing tab at top and slide off upwardly. (See pg. 8) . 2. Grasp one tab at either end of rubber battery door and "peel" out. 3. Pull up on ribbon to remove battery. 4. Snap-off battery connector, remove old battery and attach new one, taking care not to pull wires. 5. This device uses one battery, but has two options: For normal service , install one standard 9-Volt, Alkaline battery, size 6LR61. To triple the battery service life, substitute a 9-Volt Lithium battery, size 6LR61 (Alkaline ­ Approximately 2000 temperature readings. Lithium - Approximately 6000 temperature readings). 6. Be certain to dispose of used batteries in a manner consistent with local environmental and institutional policy for lithium or alkaline battery disposal. 7. Press rubber door back firmly into place until surrounding edges are fully seated and resealed . 8. Reinstall isolation chamber with Pro be attached.

VII. Mounting Instructions 1. To mount the Filac* FasTemp* Thermometer onto any ve rtical or horizontal surface, a convenient Storage Base is provided . 2. For hollow wall mounting, locate a stud and use the 2 screws provided . If mounting between studs, "'substitute 2 standard hollow wall anchors. 3. The screws included may also be used to permanently mount the base to a tabletop. ' '. 4. Double face tape is provided ONLY FOR TABLETOP MOUNTING whe re a less permanent means of attachment is desired. 5. Rolling stands are available for this device. See pg. 20.

VIII. Anti-Theft Features & Options 1. The Filac* FasTemp* is equipped with an electronic system that deters casual theft by disabling the thermometer after a preset number of tempera­ tures have been taken. 14

FILAC* FASTEMP* Electronic Thermometer

2. A Filac* FasTemp* Mounting Base is required in order for this option to function. 3. To reactivate the thermometer it must be returned momentarily to any Filac* FasTemp* Storage Base when indicated by a displayed icon (pg. 6). 4. The anti-theft option is normally disabled as shipped from the factory. 5. To turn off/change Anti-Theft Option, see pg.13. 6. Key-locking is also possible where a more positive anti-theft deterrent is desirable. This option must be purchased separately and comes with spe­ cial installation instructions. See page 20 to order.

IX. Troubleshooting 1. If device fails to function properly after washing & reconnecting Probe, ri nse all contacts in de-ionized water and blow dry. 2. Icons as described on pg . 6 indicate all other possible errors and remedies. 3. No user-serviceable parts inside. 4. Refer to a factory or qualified Biomedical Technician for service .

FILAC* FASTEMP* Electronic Thermometer

15

x. Specifications UL LISTING Medical Electrical Equipment Filac* FasTemp* 1 Classified with respect to electrical shock, fire, and mechanical hazards only in accordance with UL2601-1 2 Classified with respect to electrical shock, fire, and mechanical hazards only in accordance with CAN/CSA C22.2 NO.601.1 <47DA> 1. Dimensions (Approximate, with Probe and Base): in.- 3 1/2 W x 8 H X 25/8 D ; mm - 81 W x 203 H x 67 D 2. Dimensions (Approximate, with Probe, no Base): in .- 3 1/8 W x 75/8 H X 21/4 D; mm - 79 W x 194 H x 57 D 3. Weight (Approximate, with Probe, no Base): Ounces - 9; Grams- 275 4. Temperature Measurement Range : 30°C to 43°C; 85°F to 110°F 5. Ambient Operating Temperature Range: 10°C to 40°C; 50° F to 104°F, at 10% - 95% RH, non-condensing. 6. Display Resolution : +/- 0.1 DC; +/- 0.1of 7. Typical prediction times, all modes: 4 - 10 seconds. After 30 seconds, unit will revert to direct mode. 8. Pulse Timer: 30 Second cou nt with a beep at 15 ,.seconds and at 30 sec­ onds. 9. Accuracy: Min. Measuring Range (Celsius)

Max. Error

Below 35.5°C ... . ...±0.2°C 35.5°C to 42.0°C with 18°C to 28°C ambient ...±O.1°C 37.0°C to 39.0°C regardless of ambient ...±O.1°C 35.5°C to 42.0°C outside, 18°C to 28°C ambient ...±0.2°C Above 42.0°C ...±0.2°C 16

FILAC* FASTEMP* Electronic Thermometer

Min. Measuring Range (Fahrenheit)

Max. Error

Below 96.4°F .. .. .. ... ... .. .. . ... . ...±0.5°F 96.4OF to 98.0°F . . ... . ... . .. .±0.3°F 98.0°F to 102.0°F ... ... .. ... .±0.2°F 102.0°F to 106.0°F ... . .. . .. . ...±0.3°F Above 106.0°F .. ... ... . .±0.5°F Meets prEN 12470-3 and ASTM E1112. 10. Battery: One Required. Standard IEC package size 6LR6 1. Alkaline - 9-Volt Lith ium - 9-Volt. (NOTE- In typical use, Alkaline will last one third as long as Lithium). Alkaline - Approximately 2000 temperature readings. Lithium­ Approximately 6000 temperature readings . 11 . Probe: Self-Calibrating. Replaceable . For Probe integrity/safety checks , refer to qualified Biomedical Technician or return to Kendall. 12. Isolation Chamber: Removable, replaceable, washable. Polypropylene. 13. Device Materials: Monitor Case - ABS, Flame retardant; Probe Handle - ABS/Polycarbonate Alloy; Isolation Chamber - Polypropylene; Cable & Connectors ­ Predominately Polyurethane; Probe Shaft - Acetal Plastic; Tip - Alumin um. ALL MATERIALS ARE LATEX FREE. 14. Type of Protection Against Electrical Shock: Internally Powered Equipment. 15. Degree of Protection Agai nst Electrical Shock: Type BF

,

16. Mode of Operation: Continuous Use. Intended for hand held use. 17. Degree of Safety of Application in the Presence: Not suitable for use in the presence of flammable anesthetic mixture with air, oxygen or nitrous oxide. 18. Transport and Storage: (Not to exceed 30 days) Transport and store this device between temperatures of -20°C to 55°C (4°F t0131 OF) . Relative humidity range should be between 10% -95 % RH, non condensing. 19. Remove battery before storing this device.

FILAC* FASTEMP* Electronic Thermometer

17

Return unit to the factory if the device is dropped and performance appears degraded, or in the event that the environmental conditions for transport, stor­ age and operation are exceeded. The Filac* FasTemp* is in complete compliance with the following International Regulatory and Safety standards: UL2601-1 CAN/CSA C22.2 No. 601-1 EN60601-1: 1990 EN60601-1-2: 1993 prEN 12470-3 MOD 93/42/EEC BS EN980: 1997 ASTM E 1112: 1998

18

FILAC* FASTEMP* Electronic Thermometer

XI. Customer Service The circuitry of the Filac* FasTemp* is not customer serviceable. In particular, electronic assembly rework will likely affect accuracy. Certain replacement items such as probes, iso-chambers, and battery covers are available from the service centers listed below. All service personnel must be properly trained, qualified and familiar with opera­ tion of the thermometer. Improper service may impair proper operation of the Filac* FasTemp*. A FasTemp Calibration Plug (reorder number 202099) is available to check accuracy of the Filac* FasTemp. It replaces the regular probe and verifies the accuracy of the main-unit electronics. Replace the main unit if accuracy is defi­ cient (error greater than ±0.1 QC). Follow the instructions that accompany the FasTemp Calibration plug. Probe accuracy can be checked by using the thermometer as you would on a patient in any mode with a cover, but place it in a calibrated waterbath. Direct mode is accurate to ±0.1 QC of the calibrated waterbath temperature. Predict mode accuracy is accurate to ±0.2QC of the calibrated waterbath temperature. The probe cable connector is designed to exceed 1,000 insertions. Do not lubricate or solvent clean. Replace the probe if the connector is thought to be faulty. See Section IV. A 9-Volt Lithium battery may be used as an alternative to alkaline to provide longer operation periods. See Section VI . In the event that it becomes necessary to return a unit for service, please follow these instructions: 1. Call the appropriate phone number listed below for an Authorized Return Number and shipping instructions. 2. Pack the instrument carefully and ship insured parcel to the appropriate location: .r-

United States Tyco Healthcare Group LR 98.6 Faichney Drive Watertown, NY 13601 Phone: 1-800-448-0190 or 315-788-5246

" Outside US & Canada Tyco Healthcare Group LP 20 Garryduff Road Ballymoney, BT53 7AP, UK Phone: 001-44-12656-63234

Canada Tyco Healthcare Canada 7500 Trans Canadian Hwy Pointe-Claire, QC H9R 5H8 Phone: 1-877-664-8926 FILAC* FASTEMP* Electronic Thermometer

19

To Order/Reorder/Replace device components and accessories, specify one or more of the following Reorder Numbers:

Probe Covers (Case of 5,000) • Reorder No. 202020 Note: Use of any other brand or style Probe Cover will result in erroneous temperature readings. Com plete Oral/Axillary System Includes electronic thermometer with BLUE - ORAUAXILLARY Isolation Chamber, BLUE - ORAL/AXILLARY Probe, with 4' (1.2m) cord and mount­ able base. • Reorder No. 202000 • Reorder No. 202010 - INCLUDES GLOBAL MANUAL Rectal System RED - RECTAL Isolation Chamber RED - RECTAL Probe with 4 1(1.2 m) Cord and mountable base. • Reorder No. 202038 Monitor Only • Reorder No. 202018 • Reorder No. 202008 INCLUDES GLOBAL MANUAL

Monitor Only - REFURBISH ED • Reorder No. 202068 Mounting Base for Wall or Table Needed for Anti-Theft System • Reorder No. 202042 Isolation Chamber BLUE - ORAUAXILLARY • Reorder No. 202028 RED - RECTAL • Reorder No. 202036 Probe (with 4 ft. standard cord) BLUE - ORAUAXILLARY • Reorder No. 202026 RED - RECTAL • Reorder No. 202034

20

Probe (with 9 ft. extended cord) BLUE - ORAUAXILLARY • Reorder No. 202027 RED - RECTAL • Reorder No. 202037 Key Lock & Mounting Bracket Kit • Reorder No. 202058 Rolling Stand with FasTemp Locking Bracket • Reorder No. 202057 1-Year Service Agreement • Reorder No. 202059 Calibration Plug • Reorder No. 202099

FILAC* FASTEMP* Electronic Thermometer