Laerdal Suction Unit Coaxial Vacuum Connector Kit Directions for Use Rev b

Coaxial Vacuum Connector Kit for Laerdal Suction Unit (Cat # 780422) Directions for Use

Important Read these directions completely before using this kit. Refer to the Laerdal Suction Unit (LSU) Directions for Use for further information.

Installation: The Coaxial Vacuum Connector Kit must be inserted between the Canister and the LSU Cabinet. To install the Coaxial Vacuum Connector: 1) Attach the blue angled connector of the Coaxial Vacuum Connector to the LSU Vacuum Connector Inlet. 2) Attach the Vacuum Connector Tubing to the elbow connected to the Vacuum Port on the Canister Lid to form a closed circuit between the canister and the pump unit. 3) Run the LSU Device Test according to the instructions found in the LSU Directions for Use. Paragraph, 3.2.3 Test.

•

•

Cautions Install and use this Kit only as described in this Directions for Use. Non-adherence can lead to negative consequences such as the LSU being unable to perform its intended function, possibly resulting in user inability to provide intended patient care. The connector and tubing are single patient use items and should be disposed of according to local maintenance procedures.

Reorder Information 780422 Coaxial Vacuum Connector - LSU (Bemis) (Includes blue angled connector, connection tube and Directions for Use).

Single Use. Do not re-use.

Coaxial Vacuum Connector Blue Angled Connector

Vacuum Connector Tubing