Model 1105 Prime Series Stretcher Maintenance Manual Rev F Feb 2011

Table of Contents Symbols and Definitions ... 9 Symbols... 9 Warning/Caution/Note Definition ... 10 Introduction... 11 Product Description ... 11 Intended Use of Product... 11 Specifications... 12 Specifications - Optional Scale System (Non-Electric Litter/Electric Litter Option)... 13 Product Illustration (Electric Litter Option Shown)... 14 Contact Information ... 15 Serial Number Location... 15 Summary of Safety Precautions... 16 Setup Procedures... 19 Cleaning... 20 Stretcher Cleaning ... 20 Mattress Cleaning... 21 Preventative Maintenance ... 23 Checklist ... 23 Quick Reference Replacement Parts List... 24 Service Information... 26 Static Discharge Precautions ... 26 Caster Assembly Replacement ... 27 Brake Swivel Lock Ring Replacement... 28 Brake Timing Link Replacement, Head End or Foot End... 29 Brake Cam Assembly Replacement... 30 Brake Rod Replacement... 31 Fifth Wheel Assembly Replacement ... 32 Jack Replacement, Head End - Non-Electric Lift ... 33 Jack Replacement, Foot End - Non-Electric Lift... 34 Jack Replacement, Head End (Optional Electric Lift)... 35 Jack Replacement, Foot End (Optional Electric Lift)... 37 Release Pedal Adjustment ... 39 Release Pedal Replacement, Foot End ... 39 Release Pedal Rod Replacement, Foot End... 39 Litter Top Removal - Non-Electric Litter... 40 Litter Top Removal (Optional Electric Litter)... 40 Siderail Assembly Removal And Replacement... 41 Siderail Latch Replacement... 42 Pneumatic Cylinder Replacement (Fowler - Non-Electric Litter) ... 43 Oxygen Bottle Holder Replacement... 44 Power Board Replacement (Optional Electric Lift/Litter)... 45 Pump Motor Replacement (Optional Electric Lift)... 46 Actuator Replacement, Fowler (Optional Electric Litter) ... 47 Actuator Replacement, Gatch (Optional Electric Litter)... 48 Foot End Control Board Replacement (Optional Electric Litter)... 49 www.stryker.com

1105-009-002 REV F

3

Table of Contents Transformer Replacement (Optional Electric Litter) ... 50 Siderail Control Pad Replacement (Optional Electric Litter) ... 51 Siderail Cable Replacement (Optional Electric Litter)... 52 Nurse Control Board Replacement (Optional Electric Litter)... 53 Nurse Control Lock-Out Board Replacement (Optional Electric Litter)... 53 Scale Board Replacement (Optional Scale System - Non-Electric Litter)... 54 Load Cell Replacement (Optional Scale System - Non-Electric Litter)... 55 Removal of Excess Air From The Hydraulic System... 56 Side Pump Pedal Replacement... 57 Gatch Release Handle Replacement (Optional)... 58 Gatch Valve Body Replacement (Optional) ... 58 Electrical Enclosure Assembly Replacement (Without Electric Litter) ... 59 Electrical Enclosure Assembly Replacement (With Electric Litter)... 60 Scale Battery Replacement (Optional Scale System - Non-Electric Litter)... 61 Scale Battery Replacement (Optional Scale System - Optional Electric Litter) ... 61 Maintenance Menu Guide ... 62 Scale System Diagnostics (Optional Scale System - Non-Electric Litter)... 62 Scale System Diagnostics (Optional Scale System - Optional Electric Litter) ... 64 Troubleshooting Guide... 66 Optional Scale System Error Codes... 69 Error Handling ... 69 Circuit Boards... 70 Litter Control Board - 1008-116-800... 70 Non-Lift Base Board - 1008-002-800... 72 Lift Base Board - 1008-002-810 ... 73 Scale Exit Board - 1008-237-840... 74 Scale Only Board - 1008-237-850... 74 Standard Brake Assembly... 75 Brake Rod Assembly... 78 Side Control Brake Assembly... 79 Brake Rod / Side Control Assembly... 83 Side Control Brake Assembly... 84 Bumper Color Options - Individual or Set of Four... 85 Fifth Wheel Drive Link Assembly ... 86 8” Caster with Full Cover Assembly - 0853-503-020... 87 Retractable Fifth Wheel Assembly... 88 Fifth Wheel Assembly - 1105-006-130 ... 89 Constant Descent Jack, Non-Electric... 91 Jack Base Assembly, Non-Electric... 92 Dual Sided Hydraulics Assembly, Non-Electric ... 93 Three-Sided Hydraulics Assembly ... 97 Release Pedal Assembly, Foot End ... 99 Pump Pedal Assembly, Foot End - 1105-005-273... 100 Common Non-Lift Base Components... 101 Dual Sided Hydraulics, Electric Litter... 102 4

1105-009-002 REV F

www.stryker.com

Table of Contents Assembly Drawings (Continued) Lowering Pedal Assembly - 1105-004-201 ... 108 Pump Pedal Assembly, Head End - 1105-005-285 ... 109 Common Lift Base Components, 120 VAC ... 110 Dual Sided Hydraulics, Electric Lift/Electric Litter... 111 Standard Cord Assembly, 120 VAC... 119 Optional Cord Reel Assembly ... 120 Fifth Wheel Hood/Bellow Assembly, Non-Electric ... 121 Fifth Wheel Hood with Three-Sided Hydraulics/Bellow Assembly, Non-Electric... 122 Fifth Wheel Hood with Four-Sided Brakes/Bellow Assembly, Non-Electric ... 123 Fifth Wheel Hood with Four-Sided Brakes and Three-Sided Hydraulics/Bellow Assembly, Non-Electric... 124 Standard Hood, Non-Electric... 125 Three-Sided Hydraulics Hood, Non-Electric ... 127 Four-Sided Brakes Hood, Non-Electric... 129 Four-Sided Brakes and Three-Sided Hydraulics Hood, Non-Electric... 131 Fifth Wheel Hood/Bellow Assembly, Electric... 133 Fifth Wheel Hood with Three-Sided Hydraulics/Bellow Assembly, Electric... 134 Fifth Wheel Hood with Four-Sided Brakes/Bellow Assembly, Electric... 135 Fifth Wheel Hood with Four-Sided Brakes and Three-Sided Hydraulics/Bellow Assembly, Electric ... 136 Standard Hood, Electric... 137 Three-Sided Hydraulics Hood, Electric... 139 Four-Sided Brakes Hood, Electric... 141 Four-Sided Brakes and Three-Sided Hydraulics Hood, Electric ... 143 26” Litter Frame Assembly... 145 26” Corner Cover Assembly... 146 26” Oxygen Bottle Assembly - 1105-030-610... 147 26” Oxygen Receptacle Assembly - 1105-030-601... 148 26” Monitor Tray Assembly - 1105-009-610 ... 149 26” Standard Fowler, Stationary Foot - Non-Electric Litter (Optional Scale System)... 150 26” Standard Fowler, Gatch - Non-Electric Litter (Optional Scale System)... 153 26” Drop Seat Fowler, Stationary Foot - Non-Electric Litter (Optional Scale System)... 156 26” Scale Liftheader - 1070-117-600 ... 159 30” Litter Frame Assembly... 160 30” Corner Cover Assembly... 161 30” Oxygen Bottle Assembly - 1105-030-310... 162 30” Oxygen Receptacle Assembly - 1105-030-301 ... 163 30” Monitor Tray Assembly - 1105-009-310 ... 164 30” Standard Fowler, Stationary Foot - Non-Electric Litter (Optional Scale System)... 165 30” Standard Fowler, Gatch - Non-Electric Litter (Optional Scale System)... 168 30” Drop Seat Fowler, Stationary Foot - Non-Electric Litter (Optional Scale System)... 171 30” Scale Liftheader - 1070-117-300 ... 174 Scale Box Assembly, Non-Electric Litter - 1070-237-020... 175 Siderail Assembly, Right - Non-Electric Litter ... 176 Siderail Assembly, Left - Non-Electric Litter ... 177 Spindle Assembly, Right - 1105-011-041... 178 www.stryker.com

1105-009-002 REV F

5

Table of Contents Assembly Drawings (Continued) Spindle Assembly, Left - 1105-011-051... 179 Siderail Latch Assembly, Right - 0785-011-020... 180 Siderail Latch Assembly, Left - 0785-011-021... 181 Latch Spindle Assembly, Right - 1105-011-042... 182 Latch Spindle Assembly, Left - 1105-011-052... 183 Optional Dual Latch Assembly, Right - 1105-011-140... 184 Optional Dual Latch Assembly, Left - 1105-011-150... 185 Optional Dual Latch Assembly, Right, Head End - 1105-011-070 ... 186 Optional Dual Latch Assembly, Right, Foot End - 0785-011-100 ... 187 Optional Dual Latch Assembly, Left, Head End - 1105-011-130 ... 188 Optional Dual Latch Assembly, Left, Foot End - 0785-011-135... 189 26” Standard Fowler Assembly ... 190 26” Standard Fowler/Stationary Foot Assembly ... 192 26” Standard Fowler with Gatch Assembly... 194 30” Standard Fowler Assembly ... 197 30” Standard Fowler/Stationary Foot Assembly ... 199 30” Standard Fowler with Gatch Assembly... 201 26” Drop Seat Fowler Assembly... 204 26” Drop Seat Fowler Assembly, Stationary Foot ... 205 26” Drop Seat Fowler with Gatch Assembly... 208 26” Seat Section Assembly... 211 26” Thigh Section Assembly ... 212 26” Foot Assembly ... 213 26” Gatch Assembly ... 214 26” Gatch Release Handle Assembly... 216 30” Drop Seat Fowler Assembly... 217 30” Drop Seat Fowler Assembly, Stationary Foot ... 218 30” Drop Seat Fowler with Gatch Assembly... 220 30” Seat Section Assembly... 223 30” Thigh Section Assembly ... 224 30” Foot Assembly ... 225 30” Gatch Assembly ... 226 30” Gatch Release Handle Assembly... 228 Gatch Valve Body Assembly - 0785-700-001 ... 229 Gatch Pump Assembly... 230 Common Litter Components, 120 VAC... 231 Optional Non-Scale Litter Assembly, Electric Litter... 232 Drop Seat Fowler Assembly, Electric Litter... 234 Siderail Assembly, Right, Electric Litter... 241 Siderail Assembly, Left, Electric Litter ... 245 Spindle Sub-Assembly, Right, Electric Litter... 249 Spindle Sub-Assembly, Left, Electric Litter... 250 Siderail Control Assembly, Right ... 251 Siderail Control Assembly, Left ... 252 6

1105-009-002 REV F

www.stryker.com

Table of Contents Assembly Drawings (Continued) Control Box Assembly, Electric Litter ... 253 Fowler Assembly, Electric Litter... 255 Seat/Gatch Assembly, Electric Litter ... 258 26” Foot Assembly, Electric Litter... 259 30” Foot Assembly, Electric Litter ... 260 Optional Nurse Control, Electric Litter ... 261 Optional Scale Litter Assembly, Electric Litter... 262 Scale Control Box Assembly ... 267 Optional Scale/Chaperone Litter Assembly, Electric Litter... 269 30” Scale Liftheader - 1070-037-300... 274 Scale/Chaperone Control Box Assembly ... 275 Scale/Chaperone Control Bottom Box Assembly... 278 Covers Assembly, No Options, Head End... 279 Covers Assembly with Pop Up Push Handles, Head End... 280 Covers Assembly with I.V. Pole, Head End ... 281 Covers Assembly with I.V. Pole and Pop Up Push Handles, Head End... 282 26” Top Cover Assembly, No Options, Foot End - 1105-210-660... 283 30” Top Cover Assembly, No Options, Foot End - 1105-210-360... 284 26” Top Cover Assembly, With I.V. Pole, Without Scale, Foot End - 1105-210-670 ... 285 30” Top Cover Assembly, With I.V. Pole, Without Scale, Foot End - 1105-210-370 ... 286 26” Top Cover Assembly, Without I.V. Pole, With Scale, Foot End - 1105-210-662 ... 287 30” Top Cover Assembly, Without I.V. Pole, With Scale, Foot End - 1105-210-362 ... 288 26” Top Cover Assembly, With Scale and I.V. Pole, Foot End - 1105-210-672... 289 30” Top Cover Assembly, With Scale and I.V. Pole, Foot End - 1105-210-372... 290 30” Top Cover Assembly, With Lockout Controls, Without Scale or I.V. Pole, Foot End - 1105-210-361... 291 30” Top Cover Assembly, With Scale and Lockout Controls, Foot End - 1105-210-363... 292 30” Top Cover Assembly, With Nurse Control and Lockout Controls, Without Scale, Foot End - 1105-210-364 . . 293 30” Top Cover Assembly, With Scale, Nurse Control, Lockout Controls and I.V. Pole, Foot End - 1105-210-365 . 294 30” Top Cover Assembly, With Lockout Controls and I.V. Pole, Foot End - 1105-210-371 ... 295 30” Top Cover Assembly, With Scale, Lockout Controls and I.V. Pole, Foot End - 1105-210-373... 296 30” Top Cover Assembly, With Nurse Control, Lockout Control and I.V. Pole, Foot End - 1105-210-374... 297 30” Top Cover Assembly, With Scale, Nurse Control, Lockout Controls and I.V. Pole, Foot End - 1105-210-375 . . 298 Optional Accessories... 299 Defibrillator Tray Assembly - 1105-045-200 ... 300 Defibrillator Tray/Foot Extender/Footboard - 1105-045-400 ... 301 Footboard/Chartholder Assembly - 1105-045-500... 302 I.V. Caddy - 0785-155-000... 303 Removable I.V. Pole - 0390-025-000 ... 304 26” Two-Stage I.V. Pole Assembly ... 305 30” Two-Stage I.V. Pole Assembly ... 306 26” Three-Stage I.V. Pole Assembly... 307 30” Three-Stage I.V. Pole Assembly... 308 Upright Bottle Holder - 1115-130-000 ... 309 26” Pump Bar Weldment... 310 www.stryker.com

1105-009-002 REV F

7

Table of Contents Assembly Drawings (Continued) 30” Pump Bar Weldment... 311 26” Push Handles Assembly - 1105-048-026 ... 312 30” Push Handles Assembly - 1105-048-030 ... 313 Ankle Restraint Strap - 0785-045-020 ... 314 Wrist Restraint Strap - 0946-047-000... 314 Body Restraint Straps - 0785-045-015... 314 Full Restraint Strap Package - 0785-045-010... 314 Serving Tray - 1105-045-700 ... 315 Footboard/Serving Tray Holder - 1105-045-800 ... 316 26” Slider Board Assembly - 1105-045-610 ... 317 30” Slider Board Assembly - 1105-045-310 ... 318 Slider Board - 0785-018-001... 319 Mattresses and Siderail Pads... 320 EMC Information... 322 Optional Electric Lift/Litter and Optional Scale System ... 322 Warranty... 326 Limited Warranty... 326 To Obtain Parts and Service... 326 Service Contract Coverage... 326 Service Contract Programs... 327 Return Authorization... 327 Damaged Merchandise... 327 International Warranty Clause... 327 Recycling Passport ... 328

8

1105-009-002 REV F

www.stryker.com

Symbols and Definitions SYMBOLS Warning/Caution: Consult accompanying documentation

Safe Working Load indicates the sum of the patient, mattress, and accessory weight

In accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment, this symbol indicates that the product must not be disposed of as unsorted municipal waste, but should be collected separately. Refer to your local distributor for return and/or collection systems available in your country. Manufacturer

Do not store oxygen bottle

Do not push/pull

~

Alternating Current

Direct Current

Type B Equipment: equipment providing a particular degree of protection against electric shock, particularly regarding allowable leakage current and reliability of the protective earth connection. Class 1 Equipment: equipment in which protection against electric shock does not rely on basic insulation only, but which includes an additional safety precaution in that means are provided for the connection of the equipment to the protective earth conductor in the fixed wiring of the installation in such a way that accessible metal parts cannot become live in the event of a failure of the basic insulation. Dangerous Voltage

Protective Earth Terminal

Protection from Liquid Jet

IPX6

87VL MEDICAL ELECTRICAL EQUIPMENT UL 60601-1 CAN/CSA C22.2 N0. 601.1

Medical Equipment Classified by Underwriters Laboratories Inc. with Respect to Electric Shock, Fire, Mechanical and Other Specified Hazards Only in Accordance with UL 60601-1 First Edition (2003) and CAN/CSA C22.2 No. 601.1.

Return To Table of Contents www.stryker.com

1105-009-002 REV F

9

Symbols and Definitions WARNING/CAUTION/NOTE DEFINITION The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.

WARNING Alerts the reader about a situation which, if not avoided, could result in death or serious injury. It may also describe potential serious adverse reactions and safety hazards.

CAUTION Alerts the reader of a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the user or patient or damage to the equipment or other property. This includes special care necessary for the safe and effective use of the device and the care necessary to avoid damage to a device that may occur as a result of use or misuse.

NOTE Provides special information to make maintenance easier or important instructions clearer.

Return To Table of Contents 10

1105-009-002 REV F

www.stryker.com

Introduction This manual is designed to assist you with the operation of Stryker Model 1105 Prime Series Stretcher. Read this manual thoroughly before using the equipment or beginning maintenance on it. To ensure safe operation of this equipment, it is recommended that methods and procedures be established for educating and training staff on the safe operation of this stretcher.

PRODUCT DESCRIPTION The Stryker Model 1105 Prime Series Stretcher, with the retractable fifth wheel, optimizes traction and cornering to improve overall mobility.

INTENDED USE OF PRODUCT The Stryker Model 1105 Prime Series Stretcher is a wheeled device which consists of a platform mounted on a wheeled frame that is designed to support patients in a horizontal position. The device has siderails and has the option available to support the temporary or permanent placement of I.V. poles. A stretcher provides the operator a method of transporting patients within a healthcare facility. The device has a fifth wheel that may be engaged to guide the stretcher along a straight line during transport and pivots the stretcher around corners. Some stretchers may also be used for minor procedures and short-term stay (treatment and recovery).

Return To Table of Contents www.stryker.com

1105-009-002 REV F

11

Introduction SPECIFICATIONS 26” Width

30” Width Option

Safe Working Load Note: Safe Working Load indicates the sum of the patient, mattress, and accessory weight.

700 lb

318 kg

700 lb

318 kg

Overall Stretcher Length

85” (± .5”)

215.9 cm

85” (± .5”)

215.9 cm

Overall Stretcher Width (Siderails Up)

34” (± 1”)

86.4 cm

38” (± 1”)

96.5 cm

76.8 cm

30.5” (± .5”)

77.5 cm

52.7 cm / 86.4 cm

20.75” / 34” (± 1”)

52.7 cm / 86.4 cm

5.75” nominal

14.6 cm

5.75” nominal

14.6 cm

1.75” under the hydraulic jacks and fifth wheel

4.5 cm

1.75” under the hydraulic jacks and fifth wheel

4.5 cm

Overall Stretcher Width (Siderails Down) 30.25” (± .5”) Minimum / Maximum Stretcher Height

20.75” / 34” (± 1”)

Fowler Angle

0° to 90° (± 5°)

Gatch Height

5.5” (14 cm) minimum

Trendelenburg / Reverse Trendelenburg

+17°/-17° (± 3°)

Minimum Under-Stretcher Clearance

Optional Electric Litter Electrical Requirements

120V ~ , 60Hz, 10 A

Duty Cycle

Continuous Operation with intermittent loading is 1 min ON/20 min OFF

Optional Scale System - Non-Electric Litter Battery Type

4 x AA Battery (4 X 1.5V) Alkaline Type (LR6)

Battery Voltage

6.0V

Optional Scale System - Electric Litter Option Battery Type

1 x Rechargeable Lithium Ion Battery Pack (0058-135-000)

Battery Voltage

10.8V , 2.4Ah

Optional Scale System - Electric Litter Option with Chaperone (Stretcher Exit) Option Battery Type

1 x Rechargeable Lithium Ion Battery Pack (0058-134-000)

Battery Voltage

10.8V , 4.8 Ah

Stryker reserves the right to change specifications without notice. Note: Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.

Return To Table of Contents 12

1105-009-002 REV F

www.stryker.com

Introduction SPECIFICATIONS (CONTINUED) Environmental Conditions

Temperature

Operation

Storage and Transportation

100 0F (38 0C) 50 0F (10 0C)

140 0F (60 0C) -4 0F (-20 0C)

95%

75% Relative Humidity

30%

10%

Atmospheric Pressure

Specifications listed are approximate and may vary slightly from unit to unit or by power supply fluctuations.

SPECIFICATIONS - OPTIONAL SCALE SYSTEM (NON-ELECTRIC LITTER/ELECTRIC LITTER OPTION) Optional Scale System Weight Operating Range

50 lb (22.7 kg) to 700 lb (318 kg)

Optional Scale System Accuracy

±3 lb (1.3 kg) for weights less than 100 lb (45 kg) and ±3% for weights greater than or equal to 100 lb (45 kg) *

Environmental Conditions

Temperature

Operation

Storage and Transportation

79 0F (26 0C) 61 0F (16 0C)

140 0F (60 0C) -4 0F (-20 0C)

95%

75% Relative Humidity

30%

10%

Atmospheric Pressure

* To meet this accuracy claim, the patient surface must be in the flat position (fowler and gatch down) and the stretcher cannot exceed 5 degrees of Trendelenburg/reverse Trendelenburg.

Return To Table of Contents www.stryker.com

1105-009-002 REV F

13

Introduction PRODUCT ILLUSTRATION (ELECTRIC LITTER OPTION SHOWN)

Optional Siderail Patient Controls

Optional Pop Up Push Handle

Siderail

Optional Patient Control Lockout Optional Scale System

Siderail Optional Gatch Release Handle Pump Pedal Uni-Lower Pedal Brake/Steer Control Pedal Option

Integrated Bumpers

Siderail Release

Optional Pump Rack

Optional Foot End Nursing Controls

Brake/Steer Control Pedal

Casters with Integrated Wheel Covers

Return To Table of Contents 14

1105-009-002 REV F

www.stryker.com

Introduction CONTACT INFORMATION Contact Stryker Customer Service or Technical Support at: (800) 327-0770 or (269) 324-6500. Stryker Medical 3800 E. Centre Avenue Portage, MI 49002 USA Please have the serial number (A) of your Stryker product available when calling Stryker Customer Service or Technical Support. Include the serial number in all written communication.

SERIAL NUMBER LOCATION

A

Return To Table of Contents www.stryker.com

1105-009-002 REV F

15

Summary of Safety Precautions Carefully read and strictly follow the warnings and cautions listed on this page. Service only by qualified personnel.

WARNING •

•

• • • •

• • •

• • • • • • • • • •

This stretcher is equipped with a hospital grade plug for protection against electric shock hazard. It must be plugged directly into a properly grounded three-prong receptacle. Grounding reliability can be achieved only when a hospital grade receptacle is used. Always apply the caster brakes when a patient is getting on or off the stretcher. Push on the stretcher to ensure that the brakes are securely locked. Always engage the brakes unless the stretcher is being moved. Injury could result if the stretcher moves while a patient is getting on or off the stretcher. Patients should be discouraged from sitting directly on the ends of the stretcher. Excessive weight could cause the litter surface to tip up, possibly causing patient injury. Leave the stretcher height in the lowest position when the patient is left unattended. Leaving the stretcher height in a raised position could increase the chance of patient falls and injury. Make sure that the brakes are completely released before attempting to move the unit. Attempting to move the unit with the brakes engaged could result in injury to the user and/or patient. After raising the siderails, pull firmly on the siderail to ensure that it is securely locked into the up position. Siderails are not intended to serve as a patient restraint device to keep patients from exiting the unit. Siderails are intended to keep a patient from inadvertently rolling off the unit. It is the responsibility of the attending medical personnel to determine the degree of restraint necessary to ensure that a patient will remain in place. Failure to utilize the siderails properly could result in patient injury. When lowering the siderail to the collapsed position, keep extremities of patients and staff away from the siderail spindles or injury could occur. Powered stretcher mechanisms can cause serious injury. Operate stretcher only with persons clear of mechanisms. Operation of the fowler is a manual procedure. Use caution when raising the fowler while a patient is on the stretcher. Use proper lifting techniques and get additional assistance, if necessary. Failure to use proper lifting techniques could cause injury to the operator. Keep hands/fingers clear of the area around the fowler release handle and the fowler frame when lowering the fowler. Injury could result if care is not taken when lowering the fowler. To avoid the risk of injury, ensure that the gatch prop rod is fully raised and securely placed into position. Use caution when operating the gatch while a patient is on the stretcher. Powered stretcher mechanisms can cause serious injury. Operate stretcher only with persons clear of mechanisms. Use caution when operating the recovery chair while a patient is on the stretcher. Powered stretcher mechanisms can cause serious injury. Operate stretcher only with persons clear of mechanisms. To avoid patient injury or equipment damage, all lines from any equipment stored on the pump rack must be diverted away from the gatch handles. To avoid patient injury or equipment damage, do not lift the stretcher by the pump rack. To avoid equipment damage, remove any equipment from the pump rack that may be in the way before lowering the litter. To avoid equipment damage while transporting the stretcher, verify that any equipment on the pump rack can safely pass through door openings and under light fixtures. To avoid the risk of injury to the patient or user or damage to the I.V. pole while transporting the stretcher, make sure that the I.V. caddy is securely tightened on the I.V. pole. If your unit is equipped with the optional electric lift/litter, unplug the power cord from the power outlet before transporting or cleaning the unit. To unplug, grasp the mold near the outlet and pull the cord in a direction parallel to the floor (not at an angle).

Return To Table of Contents 16

1105-009-002 REV F

www.stryker.com

Summary of Safety Precautions WARNING (CONTINUED) • •

•

• •

Do not steam clean the unit. Possible fire and/or explosion hazard when used with anesthesia, oxygen tents, hyperbaric chambers, other combustible gasses, or oxygen administering equipment of other than the nasal, mask, or 1/2 bed length type. Oxygen tent should not extend below the mattress support level and should not enclose electronic user interface controls. Lock patient controls when using oxygen administering equipment. Medical electrical equipment (such as the optional scale system or optional electric lift/litter) requires special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided on page 322 to prevent equipment malfunction. Portable and mobile RF communication equipment can affect Medical Electrical Equipment (such as the optional scale system or optional electric lift/litter). To avoid malfunction, the optional scale system or optional electric lift/litter should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is necessary, the optional scale system or optional electric lift/litter should be observed to verify normal operation in the configuration in which it will be used.

CAUTION • • • • • • • • • • • • • • •

• • • • •

This stretcher is not intended for pediatric use or for patients under 50 lb. This stretcher is intended for use by trained hospital personnel only. Do not modify this stretcher. Modifying the unit can cause unpredictable operation resulting in injury to the patient or operator. Modifying the unit will also void its warranty. To avoid damage, remove any equipment that may be in the way before raising or lowering the litter height. Do not raise the unit (hydraulics on base) with a patient lift under the stretcher. To avoid injury or damage to the equipment, do not allow the siderail to lower on its own. The weight capacity of the gatch is 200 lb. Do not sit or stand on the gatch. Injury or damage to the equipment could occur. To achieve recovery chair position, your stretcher must be equipped with the lift assist backrest and gatch options. The weight capacity of the base hood is 60 lb. Do not sit or stand on the base hood. Injury or damage to the equipment could occur. Do not step on the base hood. Do not use the cutout for the oxygen bottle holder on the base hood for the storage of oxygen bottles or patient belongings. The weight capacity of the pump rack is 40 lb. Do not use the pump rack as a push/pull device, because equipment damage could occur. To avoid damage, do not put items weighing more than 30 lb on the defibrillator tray. Do not use the defibrillator tray as a push/pull device, because equipment damage could occur. If the stretcher is equipped with the optional foot end I.V. pole, the I.V. pole must be in the raised position when the foot extension/defibrillator tray is installed. If the I.V. pole is not raised, the foot extension will not function properly and injury could occur. If the stretcher is equipped with the optional foot end push handles, use caution while the foot extension/defibrillator tray is installed to avoid pinching your fingers. To avoid damage, do not put items weighing more than 30 lb on the foot extender/defibrillator tray. Do not use the foot extension/defibrillator tray as a push/pull device, because equipment damage could occur. Do not use the footboard/chartholder as a push/pull device because equipment damage could occur. Always store the I.V. caddy when not in use to avoid damaging it when the unit is moved.

Return To Table of Contents www.stryker.com

1105-009-002 REV F

17

Summary of Safety Precautions CAUTION (CONTINUED) • • • • • • • • • •

•

To avoid damage, the weight of the I.V. bags should not exceed 40 lb. To avoid damage, the safe working load of the two-stage permanently attached I.V. pole is 40 lb. To avoid damage while transporting the stretcher, verify that the I.V. pole is at a low enough height to allow it to safely pass through door openings and under light fixtures. Do not use the I.V. pole as a push/pull device, because equipment damage could occur. To avoid damage, the weight of the I.V. bags should not exceed 12 lb while the weight of any one item attached to each stage of the three-stage permanently attached I.V. pole should not exceed 9.3 lb. To avoid damage, do not put items weighing more than 40 lb in the upright oxygen bottle holder. Do not use the upright oxygen bottle holder as a push/pull device because equipment damage could occur. To avoid damage, do not put items weighing more than 30 lb on the serving tray. Do not use the serving tray holder/foot board as a push/pull device because equipment damage could occur. Before returning the unit to service after cleaning, ensure that the unit is functioning properly by verifying that all labels are intact, raise/lower the stretcher height, brake/steer pedal locks properly in both positions, latch/unlatch the siderails, raise/lower the fowler and gatch, and check all components for proper lubrication. Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. If the products suggested above are used to clean Stryker patient handling equipment, measures must be taken to ensure that the stretcher is wiped with a damp cloth soaked in clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretcher will leave a corrosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components. Failure to follow the above directions when using these types of cleaners may void this product’s warranty.

NOTE • •

The bottom of the brake pads should be cleaned regularly to prevent wax or floor remnant buildup. Clean the base hood storage area regularly.

Return To Table of Contents 18

1105-009-002 REV F

www.stryker.com

Setup Procedures If this unit is equipped with the optional electric lift/litter, the unit must reach room temperature prior to conducting any setup and/or unit operations to prevent permanent damage to the unit. Make sure that the unit is working properly before it is put into service. The following list will ensure that each part of the unit is checked. Stretcher checklist: 1. 2. 3. 4. 5. 6. 7. 8.

Depress the pedal at either end of the stretcher fully to set the four wheel brakes and verify that all of the four casters are locked. Raise and lower the hydraulic lift system. Raise the unit completely and activate the Trendelenburg function. Ensure that the head end lowers to the full down position. Raise the unit completely and activate the reverse Trendelenburg function. Ensure the foot end lowers to the full down position. Run through the operation of the fifth wheel to ensure that it is operating properly. Ensure that the siderails raise and lower smoothly and lock securely in the full up position. Raise and lower the fowler (head end). Raise and lower the gatch (foot end).

If equipped with the optional electric lift/litter: 1. 2. 3. 4. 5. 6. 7.

Check all items on the stretcher checklist above. Plug the unit into a properly grounded, hospital grade wall receptacle and ensure that the LED lights illuminate on the lockout keypad. Raise and lower the hydraulic lift system. Perform each function on the patient siderail controls to ensure that they are working properly. Perform each function on the foot end nursing controls to ensure that they are working properly. Raise and lower the fowler (head end). Raise and lower the gatch (foot end).

If equipped with the optional scale - electric litter option (with or without chaperone option): 1. 2.

Check all items on the stretcher checklist above. Plug the power cord into a properly grounded, hospital grade wall receptacle to charge the batteries.

WARNING This stretcher is equipped with a hospital grade plug for protection against electric shock hazard. It must be plugged directly into a properly grounded three-prong receptacle. Grounding reliability can be achieved only when a hospital grade receptacle is used.

CAUTION • •

Do not modify this stretcher. Modifying the unit can cause unpredictable operation resulting in injury to the patient or operator. Modifying the unit will also void its warranty. This stretcher is not intended for pediatric use or for patients under 50 lb. This stretcher is intended for use by trained hospital personnel only.

Return To Table of Contents www.stryker.com

1105-009-002 REV F

19

Cleaning STRETCHER CLEANING WARNING •

•

If your unit is equipped with the optional electric lift/litter, unplug the power cord from the power outlet before transporting or cleaning the unit. To unplug, grasp the mold near the outlet and pull the cord in a direction parallel to the floor (not at an angle). Do not steam clean the unit.

These instructions are intended to provide recommended cleaning methods for Model 1105 Prime Series Stretchers. These units are designed to be power−washable. The unit may show some signs of oxidation or discoloration from continuous washing. However, no degradation of the stretcher’s performance characteristics or functionality will occur due to power washing as long as the proper procedures are followed.

RECOMMENDED CLEANING METHOD • • •

 ollow the cleaning solution manufacturer’s dilution recommendations exactly. F Stryker Medical recommends the standard hospital surgical cart washer for power washing. Do not replace the mattress on the stretcher until the unit is completely dry.

RECOMMENDED CART WASHING CLEANING METHOD Stryker Medical recommends using a standard hospital surgical cart washer to power wash the stretcher a maximum of once per year for the life of the unit. To clean the unit with a cart washer: 1. Remove the mattress prior to washing the unit; do not wash the mattress with the stretcher. 2. Position the fowler at 45 degrees, position the gatch to the full down position, place the unit in full reverse Trendelenburg (foot end down), raise the siderails, and place the I.V. poles and push handles in the up position. 3. Clean the unit with a maximum water temperature of 180 0F (82 0C), maximum air dry temperature (cart washers) is 200 0F (93 0C) for 8 minutes, and maximum water pressure − 1500 psi/103.5 bar. Note: If a handheld wand is being used to wash the unit, the pressure nozzle must be kept a minimum of 24 inches/.61m from the unit. In addition, the same water temperatures and stretcher configurations apply as the cart washer.

CAUTION  efore returning the unit to service after cleaning, ensure that the unit is functioning properly by verifying that all labels B are intact, raise/lower the stretcher height, brake/steer pedal locks properly in both positions, latch/unlatch the siderails, raise/lower the fowler and gatch, and check all components for proper lubrication.

Return To Table of Contents 20

1105-009-002 REV F

www.stryker.com

Cleaning STRETCHER CLEANING (CONTINUED) RECOMMENDED CLEANERS Suggested cleaners for stretcher surfaces: Quaternary Cleaners (active ingredient - ammonium chloride). Phenolic Cleaners (active ingredient - o-phenylphenol). Chlorinated Bleach Solution (5.25% - less than 1 part bleach to 100 parts water). Avoid over saturation and ensure that the product does not stay wet longer than recommended by the chemical manufacturer’s guidelines for proper disinfecting.

CAUTION Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. If the products suggested above are used to clean Stryker patient handling equipment, measures must be taken to ensure that the stretcher is wiped with a damp cloth soaked in clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretcher will leave a corrosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components. Failure to follow the above directions when using these types of cleaners may void this product’s warranty. Stretchers must have maintenance performed after a minimum of every fifth washing. See the maintenance manual for specific lubrication instructions. Do not use abrasive cleaners to clean the display enclosure for the optional scale system. Do not allow cleaning solutions or other fluids to pool on the display unit. Wipe dry all surfaces after spills or cleaning.

MATTRESS CLEANING These instructions are intended to provide recommended cleaning methods for stretcher mattresses.

RECOMMENDED CLEANING METHOD • • • • • • •

Hand-wash all surfaces of the mattress with warm water and mild detergent cleaner. Dry thoroughly. Apply disinfectant solution either by spray, solution or pre-impregnated wipes (do not soak mattress). Clean per hospital protocol for mattresses. Wipe up excess disinfectant. Rinse with clean water. Allow surface to dry.

RECOMMENDED DISINFECTANTS IMPORTANT: DILUTE ALL DISINFECTANTS IN ACCORDANCE WITH MANUFACTURER’S DIRECTIONS When used in concentrations recommended by the manufacturer, diluted bleach, diluted phenolic, or diluted quaternary germicidal disinfectants are recommended. Chlorine Bleach, typically 5.25% Sodium Hypochlorite, should be used at a dilution ratio of 1 part bleach to 100 parts water.

Return To Table of Contents www.stryker.com

1105-009-002 REV F

21