System Flow Chart
16 Pages
Preview
Page 1
System Flow Chart ANESTHESIA SYSTEM FLOW-i
• Factory mounting only. • Table height: - Standard - with two drawers: 87 cm.
Two drawers, one with lock 66 82 232
Two drawers
• Factory mounting only. • Table height: - With three drawers: 103 cm.
Three drawers, one with lock 66 81 882
Three drawers
Interface height 645 mm Interface height 778 mm
Interface height 645 mm 66 89 210 Interface height 778 mm 66 89 212
• Factory mounting only.
One drawer with lock 66 88 687
• Factory mounting only.
Two drawers, one with lock 66 82 232
Two drawers
M-Lifting system For more information please contact Maquet Surgical Workplaces.
Lifting system Local delivery.
More information regarding required height is found in the FLOW-i Data sheet.
66 89 212
66 89 210
One of the following heights must also be selected: Interface height 560 mm 66 89 207
One of the following heights must also be selected: Interface height 560 mm 66 89 207
Green text = compatibility note
Red text = upgrade of existing anesthesia systems
Pendant mounting kit, Trumpf/Dräger 66 89 200
More information regarding required height is found in the FLOW-i Data sheet.
One drawer
= box for ordered quantity
= and/or
Bold line = standard system configuration
ao
Note! Not all products listed here are available in all countries. For details contact your sales representative.
Pendant mounting kit, M-Lifting 66 89 202
• Base unit including: - Carrier with four wheels. - 15” touch screen. - Adjustable arm for up to two display units. - Two vaporizer connections. - Four “T” side slots for accessory mounting. - Battery backup (90 minutes). - Lamp. - Integrated patient gas analyzer. • Ventilation modes: - Manual ventilation. - Volume Control ventilation. - Pressure Control ventilation. • Connections: - 2 x RS232 with FCI protocol. - 1 x USB. - 1 x VGA (output). - 1 x Ethernet (ready for Remote Services). • Gas inlets: - O2. - Air. - N2O. - O2, Air, N2O backup prepared. • Patient cassette and volume reflector. • Country kit must be ordered separately (see below).
• Table height: Adjustable 83 - 103 cm.
• Base unit including: - Carrier with small wheels for transport within OR. - 15” touch screen. - Adjustable arm for up to two display units. - Two vaporizer connections. - Four “T” side slots for accessory mounting. - Battery backup (90 minutes). - Lamp. - Integrated patient gas analyzer. • Ventilation modes: - Manual ventilation. - Volume Control ventilation. - Pressure Control ventilation. • Connections: - 2 x RS232 with FCI protocol. - 1 x USB. - 1 x VGA (output). - 1 x Ethernet (ready for Remote Services). • Gas inlets: - O2. - Air. - N2O. - O2, Air, N2O backup prepared. • Patient cassette and volume reflector. • Country kit must be ordered separately (see below).
• Base unit including: - Carrier (height adjustable) with four wheels. - One drawer with lock. - 15” touch screen. - Adjustable arm for up to two display units. - Two vaporizer connections. - Four “T” side slots for accessory mounting. - Battery backup (90 minutes). - Lamp. - Integrated patient gas analyzer. • Ventilation modes: - Manual ventilation. - Volume Control ventilation. - Pressure Control ventilation. • Connections: - 2 x RS232 with FCI protocol. - 1 x USB. - 1 x VGA (output). - 1 x Ethernet (ready for Remote Services). • Gas inlets: - O2. - Air. - N2O. - O2, Air, N2O backup prepared. • Patient cassette and volume reflector. • Country kit must be ordered separately (see below).
MAQUET FLOW-i C20 66 77 200
Ceiling pendant version MAQUET FLOW-i C40 66 77 400
Electronically height adjustable version MAQUET FLOW-i C30 66 77 300
Fixed height version
BASE UNIT
FLOW-i ANESTHESIA SYSTEM, SYSTEM VERSION 4.0
| 2 | FLOW-i | Critical Care |
COUNTRY KIT
AGA conn. DISS conn. North Am. power cable 66 78 385 French conn. European power cable 66 78 387 NIST conn. AGA conn. NIST conn. AGA conn. French conn. European power cable 66 88 267 AGA conn NIST conn. DISS conn. North Am. power cable 66 95 192
Finnish
French/CAN
French
French
French
German
German
Greece
Hungarian
Italian
Japanese
66 92 667
European power cable 66 87 587
NIST conn. NIST conn. NIST conn. NIST conn. AGA conn. DISS conn. North Am. power cable 66 78 397 AGA conn. AGA conn. NIST conn.
Romanian
Russian
Serbian
Slovak
Spanish
Spanish
Spanish
Swedish
Turkish
66 78 410
• Factory mounting only.
Vietnamese NIST conn. European power cable 66 88 262 • Including: - Gas inlet connections. - Mains power inlet cable, 3.5 m. - User's manual. - Quick reference guide. • Alternative mains power cable can be ordered separately (see below).
European power cable 66 88 270
European power cable 66 78 405
North Am. power cable 66 78 400
European power cable 66 78 395
European power cable 66 88 280
European power cable 66 88 930
European power cable 66 86 702
66 94 750
Brazilian power cable Brazilian power cable
Portuguese/BR/115 V AGA conn.
European power cable 66 78 407
European power cable 66 88 277
European power cable 66 86 695
European power cable 66 88 260
European power cable 66 78 402
European power cable 66 88 272
European power cable 66 78 382
European power cable 66 78 380
European power cable 66 78 392
European power cable 66 78 390
European power cable 66 86 692
European power cable 66 88 265
European power cable 66 78 377
European power cable 66 78 375
UK power cable
European power cable 66 78 412
European power cable 66 88 282
AGA conn.
Portuguese/BR
AGA conn.
Estonian
AGA conn.
NIST conn.
English
Portuguese
AGA conn.
English
AGA conn
DISS conn. North Am. power cable 66 88 752
English/US
Polish
DISS conn. North Am. power cable 68 81 558
English/TW
NIST conn.
NIST conn.
English/SG
AGA conn.
DISS conn. North Am. power cable 66 78 372
English/CAN
Norwegian
NIST conn.
Dutch
Lithuanian
AGA conn
Danish
European power cable 66 88 275
66 86 697
AGA conn
Czech
Chinese power cable
NIST conn.
Chinese
European power cable 66 88 257
NIST conn.
FLOW-i country kit Bulgarian
Great Britain, UK BS 1363
_____________
North America, US 5-15R
_____________
Europe, EU CEE 7
Mains power cable, 3.5 m _____________
Alternative mains power cable
66 70 310
66 83 275
64 24 329
MAQUET USB stick 66 87 615 • Empty USB stick, approved for FLOW-i.
Upgrade via E-delivery, FLOW-i 66 87 590 • Neccessary for E-delivery of software option upgrades via the MCC SW download website "http://swdownload.maquet.com". • Including: - User’s manual.
E-delivery
Neccessary for transfer of software upgrade options when upgrading existing FLOW-i anesthesia machines.
Upgrade via freight, FLOW-i 66 86 900 • Including: - User’s manual.
Freight
FOR UPGRADE OF INSTALLED FLOW-i ANESTHESIA MACHINES:
| Critical Care | FLOW-i | 3 |
EXTRA MAINS POWER OUTLETS
ADDITIONAL FRESH GAS FLOW
GAS CONTROL MODES
Standard configuration 230V 66 82 297
SIMV 66 88 197
230 V
• Factory mounting only.
Integrated patient monitor power cable 66 87 100
66 80 180
Extra mains power outlets, IEC, 3 pcs • With isolation transformer. 115 V 66 80 177
ao PRVC 66 88 202
Starter kit anesthesia,infant, 10 mm mm 66 96 712 • Including: - 1 pc of Set of breathing circuit, 10 mm, disposable (20 pcs: 66 92 210). - 1 pc of Servo Duo Guard viral/bacterial filter (60 pcs: 66 71 775). - 1 pc of Anesthesia mask, reusable, Size 0, small infant (10 pcs: 66 92 225).
10 mm patient tubes
• Factory mounting only.
AFGO adapter kit, on-site upgrade: Order no 66 86 860.
AFGO adapter kit FLOW-i 66 86 857
Software option AFGO (Additional Fresh Gas Outlet) 66 81 887
AGCTM Automatic Gas Control 68 81 990
Pressure Support with backup 66 88 200
Without extra mains power outlets Standard configuration 115V 66 82 295
Extended ventilation package 66 88 205 - Pressure support with backup. - PRVC. - SIMV.
ADDITIONAL VENTILATION MODES
Starter kit Anesthesia, adult, 22 mm 66 96 810 • Including: - 1 pc of Set of breathing circuit, 22 mm, disposable (20 pcs: 66 92 205). - 1 pc of Servo Duo Guard viral/bacterial filter (60 pcs: 66 71 775). - 1 pc of Anesthesia mask, disposable, Size 4, medium adult (20 pcs: 66 92 242).
22 mm patient tubes
One selected kit may be ordered with every FLOW-i
STARTER KIT CONSUMABLES
| 4 | FLOW-i | Critical Care |
O2 FLOWMETER / SUCTION EQUIPMENT
GAS OUTLETS
66 81 895
French std DISS
66 82 172
66 89 867
O2 + Air, NIST/UK color
ao Hydrofobic bacterial/viral filter 57 500 630 * • For Auxiliary O2 and suction module. • Disposable. * Order from Maquet KG, Rastatt, Business Unit MEDAP, phone +49-7222-932-0.
For more information please contact Maquet KG, Rastatt, Business Unit MEDAP, phone +49-7222-932-0.
Suction accessories
Angled adapter for sterile water container 66 81 900
Auxiliary O2 and suction module 66 79 847 • Including: - Rear handle for base unit. - Hydrofobic bacterial/viral filter, 5 pcs. - Silicone rubber tube between suction ejector and suction bottle, length 1 m, Internal diameter 6 mm.
66 88 892
O2 + Air, DISS/US color
O2 + Air, French std./ISO color 66 82 175
O2 + Air, NIST/ISO color
Gas hose kit for auxiliary O2 and suction module 66 82 170 O2 + Air, AGA/ISO color
66 81 890 66 81 892
NIST
Gas outlets • 1 x O2 + 1 x Air AGA 66 80 312
| Critical Care | FLOW-i | 5 |
BACKUP GAS SUPPLY
Backup gas rack O2 / N2O 68 81 266 • Pin-index yokes. • For gas cylinders up to 5 l. • Including: - Gas connector. - Pressure regulators. - Connection cable for pressure monitoring.
Hose N2O, gas backup ISO/US color 66 83 607
66 88 897
Backup gas holder N2O 66 86 587 1 x N2O • Pin-index yoke. • For gas cylinder up to 5 l. • Including: - Gas connector. - Pressure regulator. - Gas connection incl. tube. - Connection cable for pressure monitoring.
Needed for mounting of Extra gas backup holder or/and Additional arm (only one Adapter kit is required).
Adapter kit 66 86 585
66 88 895 66 89 870
US color UK color
Hose Air, gas backup ISO color 66 83 605
O2 only
Backup gas holder O2 1 x O2 66 92 630 • Pin-index yoke. • For gas cylinder up to 5 l. • Including: - Gas connector. - Pressure regulator. - Connection cable for pressure monitoring.
Needed for mounting of Extra gas backup holder or/and Additional arm (only one Adapter kit is required).
Adapter kit 66 86 585
NOTE! For FLOW-i C30 it is not possible to connect both Backup gas holder O2 (66 92 630) and Additional arm (66 86 225)
Backup gas rack O2 / Air 68 81 267 • Pin-index yokes. • For gas cylinders up to 5 l. • Including: - Gas connector. - Pressure regulators. - Connection cable for pressure monitoring.
NOTE! For FLOW-i C30 it is not possible to connect both Backup gas holder N2O (66 86 587) and Additional arm (66 86 225)
O2 + N2O / O2 + Air NOTE! Only available for C20 and C30
US color
Hose O2, gas backup ISO color 66 83 602
Gas cylinder backup
| 6 | FLOW-i | Critical Care |
ao
Mounting kit for T5 66 86 637
GAS ANALYZER ACCESSORIES
MAQUET filling adapter tube for isoflurane bottle 66 82 290
Extra adapter
Vaporizer Isoflurane, MAQUET filling 66 82 280 • Including: - MAQUET filling adapter.
VAPORIZER
Mounting kit for T8 66 86 635
Mounting kit for Pick & Go 66 87 472
Cover for vaporizer slot 68 80 158
Mounting kit, slide plate vertical 66 87 695
Dryline A water trap, 10 pcs/pkg 65 22 747 • Disposable.
Vaporizer holder 68 80 155
ao
Universal bracket for C20 66 87 457 • For FLOW-i C20. • For CPU mounting.
Universal bracket for C30 66 87 932 • For FLOW-i C30. • For CPU mounting.
Only with FLOW-i C30 Only with FLOW-i C20
Adjustable arm for patient monitor parameter modules 66 76 960
Vaporizer Desflurane, Saf-Fil ® 66 82 287
Mounting kit for two pin interface 66 80 315
For placement of 3rd vaporizer
Sampling line, 25 pcs/pkg 2.0 m 66 92 212 • Disposable.
ao
Vaporizer Sevoflurane, QUIK FIL® 66 82 285
ao
Mounting kit, slide plate horizontal 66 87 692
MAQUET filling adapter tube for sevoflurane bottle 66 82 292
Extra adapter
Vaporizer Sevoflurane, MAQUET filling 66 82 282 • Including: - MAQUET filling adapter.
ao
Mounting kit for VESA 75/100 66 86 577
PATIENT MONITORING MOUNTINGS
Universal bracket for C20, right side 68 81 339 • For FLOW-i C20. • For CPU mounting.
Top shelf 66 88 207
| Critical Care | FLOW-i | 7 |
MANUAL VENTILATION
Hose, Air (6 mm), with quick couplings AGA (black/white), 3 m 66 71 347
DISS EVAC connector 66 79 647
Evac outlet connection
Gas evacuation hose Local delivery
12.7 mm / ½” in hose Barb connector 66 79 627
5m
Breathing bag set 22 mm, Hytrel 66 92 187 • Including: - Patient tube 110 cm (22 mm conn). - Breathing bag 2 L (reusable). - Adapter 22 mm conn.
66 71 212
Hose, Air, NIST female/ German male (black/ white) 3m 66 71 210
62 37 585
Breathing bag set 15 mm, Hytrel 66 92 192 • Including: - Patient tube 110 cm (22 mm conn). - Breathing bag 1 L (reusable). - Adapter 22 mm conn.
15 mm patient tubes
Breathing bag set 10 mm, Hytrel 66 92 190 • Including: - Patient tube 110 cm (22 mm conn). - Breathing bag 0.5 L (reusable). - Adapter 22 mm conn.
10 mm patient tubes
62 37 601
5m
66 71 160
5m
62 37 593
Hose, Air, French standard (black/white) 3m 62 37 692
5m
Hose, N2O, French standard (blue) 3m 66 76 685
5m
Hose, O2, French standard (white) 3m 62 37 684
French standard connections, ISO Color markings
Gas evacuation hose Local delivery
25 mm / 1” Barb connector 66 79 630
Hose, Air, NIST female/ female (black/white) 1.5 m 66 71 157
66 71 260
5m
5m
66 71 222
Hose, N2O, NIST female/female (blue) 3m 66 71 255
Hose N2O, NIST female/ German male, (blue) 3m 66 71 220
66 71 257
5m
5m
66 71 217
Hose, O2, NIST female/ female (white) 3m 66 71 252
Hose, O2, NIST female/ German male, (white) 3m 66 71 215
NIST connections, ISO Color markings
EVAC restrictor 68 80 156
For restriction of excessive EVAC flow
Gas evacuation hose Local delivery
NIST/German connections, ISO Color markings
Gas evacuation hose Local delivery
30 mm out. diam. ISO taper connector 66 73 980
22 mm patient tubes
Hose, N2O (6 mm), with quick couplings AGA (blue), 3 m 91 04 464
Hose, O2 (6 mm), with quick couplings AGA (white), 3 m 62 37 189
AGA connections, ISO Color markings
GAS SUPPLY
Central scavenging system
Connection tube 22 mm int. diam. (disposable), 50 m 61 89 646
22 mm out. diam. connector 66 92 740
GAS EVACUATION (ANESTHETIC GAS SCAVENGING)
Hose, Air, DISS female/female (yellow), 4.5 m 64 81 753
Hose, N2O, DISS female/female (blue), 4.5 m 64 81 746
Hose, O2, DISS female/female (green), 4.5 m 64 19 944
DISS connections, US Color markings
Gas evacuation hose Local delivery
AGA EVAC connector 66 79 645
Gas evacuation hose Local delivery
WAGD-to-Vacuum connector 66 92 742
| 8 | FLOW-i | Critical Care |
Reusable
66 92 222
3L
66 92 202
3l
Breathing circuit, 10 mm, Hytrel (1.5 m) 66 92 185 • Including: - 2 x Patient tube 150 cm (22/10 mm conn). - Angled Y-piece with luerlock port, 15/10 mm conn.
10 mm patient tubes
Tube connector 22-15 mm, angled, 5 pcs/pkg 90 37 730
ao
Reusable
Set of breathing circuit, 22 mm, Disposable (1.5 m), 20 pcs/pkg 66 92 205 • Including: - Patient tubes (smooth-bore), 22 mm diameter, 150 cm. - Manual bag tube (smoothbore), 22 mm, 100 cm. - Latex-free manual bag, 2 L. - Y-piece. - Gas sampling line, 2.0 m. - Elbow connector with gas sampling port.
22 mm patient tubes
66 92 220
2L
66 92 200
2l
Servo DuoGuard viral/bacterial filter, 60 pcs/pkg 66 71 775
66 92 217
1L
66 92 197
1l
Breathing circuit, 15 mm, Hytrel (1.5 m) 66 92 182 • Including: - 2 x Patient tube 150 cm (22/15 mm conn). - Y-piece 22/15 mm conn. - Angled adapter 22/15 mm conn. with luer-lock port.
15 mm patient tubes
Breathing circuit, 22 mm, Hytrel (1.5 m) 66 92 180 • Including: - 2 x Patient tube 150 cm (22 mm conn). - Y-piece 22 mm conn. - Angled adapter 22/15 mm conn. with luer-lock port.
22 mm patient tubes
PATIENT CONNECTION
VIRAL/BACTERIAL FILTER
Breathing bag, disposable, 20 pcs/pkg 0.5 L 66 92 215
Disposable
Breathing bag, reusable 0.5 l 66 92 195
Reusable
Alternative breathing bag
Tube joint/adapter 22 mm 64 25 581 • 22 mm out. diam., 15 mm int. diam.
Set of breathing circuit, 15 mm, Disposable (1.2 m), 20 pcs/pkg 66 92 207 • Including: - Patient tubes (smooth-bore), 15 mm diameter with 22 mm connectors, 120 cm. - Manual bag tube (smoothbore), 15 mm diameter with 22 mm connector, 120 cm. - Latex-free manual bag, 1 L. - Y-piece. - Gas sampling line, 2.0 m. - Elbow connector with gas sampling port.
15 mm patient tubes
Disposable
Set of breathing circuit, 10 mm, Disposable (1.2 m), 20 pcs/pkg 66 92 210 • Including: - Patient tubes (smooth-bore), 10 mm diameter with 22 mm connectors, 120 cm. - Manual bag tube (smoothbore), 10 mm diameter with 22 mm connector, 120 cm. - Latex-free manual bag, 0.5 L. - Y-piece. - Gas sampling line, 2.0 m. - Elbow connector with gas sampling port.
10 mm patient tubes
| Critical Care | FLOW-i | 9 |
Left side DIN rail (10 x 25 mm) 66 78 570 • For “T” side slot.
Left (patient) side rail (max. 2 pcs)
ao
Vertical rail converter 66 89 740
Clamp, rail 10 x 25 mm 60 38 801 • For DIN rails.
Right side DIN rail (10 x 25 mm) 66 78 572 • For “T” side slot.
Right side rail (max. 2 pcs)
DIN rail (10 x 25 mm)
HARDWARE ACCESSORIES
ANESTHESIA MASK
66 92 242 66 92 245 66 92 247
Size 4, medium adult Size 5, large adult Size 6, XL adult
66 92 227 66 92 230 66 92 232 66 92 235 66 92 237
Size 1, medium infant Size 2,, large infant Size 3, small adult Size 4, medium adult Size 5, large adult
Clamp must be ordered separately.
Hook with hook holder 93 68 952
Clamp, 1 slot 93 58 193 • For “T” side slot.
Left side Duoflex rail (10 x 30 mm) 66 79 537 • For “T” side slot.
Left (patient) side rail (max. 2 pcs)
ao
Clamp, rail 10 x 30 mm 60 38 819 • For Duoflex rails.
Right side Duoflex rail (10 x 30 mm) 66 79 542 • For “T” side slot.
Right side rail (max. 2 pcs)
Duoflex rail (10 x 30 mm)
Anesthesia mask, disposable, 20 pcs/pkg Size 3, small adult 66 92 240
Disposable
Anesthesia mask, reusable, 10 pcs/pkg Size 0, small infant 66 92 225
Reusable
| 10 | FLOW-i | Critical Care |
TEST LUNG Test Lung 190, adult 60 06 832
Cable support arm 66 87 487
Additional table 66 76 962 • On flexible arm. • Height adjustable.
Note! This handle is included in the Auxiliary O2 and suction module (see above).
Rear handle 66 81 907
Manual breathing bag support arm 66 80 597
Additional arm 66 86 225 • Vertical and lateral motion. • VESA 75/100 mm.
Needed for mounting of Extra gas backup holder or/and Additional arm (only one Adapter kit is required).
Adapter kit 66 86 585
Manual breathing bag support arm, rigid 68 80 157
NOTE! For FLOW-i C30 it is not possible to connect both Backup gas holder (N2O/66 92 630 or O2/66 86 587) and Additional arm (66 86 225)
| Critical Care | FLOW-i | 11 |
- Preventive service. - Corrective service. - (Selected spare parts). - Maintenance kits. - Updates. - User training.
MCare Plus • Including:
FLOW-i Remote services adapter 66 96 757 • Including: - Installation instructions.
Remote service
Cleaning adapter kit 66 81 910
MCARE - Telephone support.
Note: Local variations of MCare may occur. For more information contact your local MAQUET office or visit www.maquet.com.
- Preventive service. - Maintenance kits. - User training.
MCARE - Telephone support.
MCare Preventive • Including:
MCARE SERVICES
CLEANING ADAPTER
Extra Patient cassette 66 80 325
Reusable CO2 absorber 66 92 582 • Including: - 10 pcs of Dust filter for reusable CO2 absorber.
Reusable
Dust filter for reusable CO2 absorber, 40 pcs/pkg 68 80 430
Extra filter
EXTRA BREATHING SYSTEM PARTS
CO2 ABSORBER
MCare Portal
Accessories discount
Software options discount
Consumables discount
Quality check
Upgrades
Emergency back-up
Additional options
- Preventive service. - Corrective service. - Selected spare parts. - Maintenance kits. - Selected consumables. - Updates. - User training.
MCare Professional • Including:
Extra Volume reflector 66 80 327 • Including: - Reflector socket
MCARE - Telephone support.
ao
CO2 absorber (disposable), 12 pcs/pkg 66 77 845
Disposable
MCare Partner • Including: MCARE - Telephone support. - Maintenance kits. - (Selected consumables). - Updates. - Technical training. - User training.
| 12 | FLOW-i | Critical Care |
| Critical Care | FLOW-i | 13 |
NOTES
| 14 | FLOW-i | Critical Care |
NOTES
| Critical Care | FLOW-i | 15 |
NOTES
Base unit
Country kit
Starter kit consumables
Additional ventilation modes
Gas control modes
Additional fresh gas flow
Extra mains power outlets
Gas outlets
O2 flowmeter / Suction equipment
Backup gas supply
Patient monitoring mountings
Vaporizer
Gas analyzer accessories
Gas evacuation (Anesthetic gas scavenging)
Gas supply
Manual ventilation
Viral/bacterial filter
Patient connection
Anesthesia mask
Hardware accessories
Test lung
CO2 absorber
Extra breathing system parts
Cleaning adapter
MCare Services
For local contact: Please visit our website www.maquet.com
l 2 l 3 l 4 l 4 l 4 l 4 l 4 l 5 l 5 l 6 l 7 l 7 l 7 l 8 l 8 l 8 l 9 l 9 l 10 l 10 l 11 l 12 l 12 l 12 l 12
Products may be pending regulatory approvals to be marketed in your country. Contact your MAQUET representative for more information.
Maquet Critical Care AB SE-171 54 Solna SWEDEN Phone: +46 (0) 8 730 73 00 www.maquet.com
GETINGE GROUP is a leading global provider of products and systems that contribute to quality enhancement and cost efficiency within healthcare and life sciences. We operate under the three brands of ArjoHuntleigh, GETINGE and MAQUET. ArjoHuntleigh focuses on patient mobility and wound management solutions. GETINGE provides solutions for infection control within healthcare and contamination prevention within life sciences. MAQUET specializes in solutions, therapies and products for surgical interventions, interventional cardiology and intensive care.
• Order No. 66 73 120 • FLOW-i, System Version 4.0 – System Flow Chart • 2014-05 • Rev. 19 English •
© Maquet Critical Care AB 2014. All rights reserved • MAQUET reserves the right to modify the design and specifications contained herein without prior notice •
Contents