Disassembly Instructions
8 Pages
Preview
Page 1
SERVO-i Ventilator System Product End-of-Life Disassembly Instructions
SERVO-i Ventilator System
Product End-of-Life Disassembly Instructions
Important • The SERVO-i Ventilator System is a medical device used in hospital environments. The unit must be properly cleaned before disassembling. Proper cleaning of the unit before Product End-ofLife disassembly must be performed by the former owner (hospital).
• Special waste. This product contains electronic and electrical components. Discard disposable, replaced and leftover parts in accordance with appropriate industrial and environmental standards. • Recycling. Worn-out batteries must be recycled or disposed of properly in accordance with appropriate industrial and environmental standards.
Environmental declaration Components with special environmental concern
Construction materials
Components listed below shall be disposed of in accordance with appropriate industrial and environmental standards.
The construction materials used in SERVO-i in % of the total weight.
PC boards (Printed circuit boards)
Metal – total 77%
• PC 1770 Main back-plane
• Aluminium 69%
• PC 1771 Control, including Lithium battery
• Steel, zink, brass 8%
• PC 1772 Monitoring, including Lithium battery • PC 1775 Plug-and-Play back-plane • PC 1777 Panel including Backlight Inverter • PC 1778 DC/DC & Standard connectors • PC 1780 Pneumatic back-plane • PC 1781 Pressure transducer, 2 each • PC 1784 Expiratory channel • PC 1785 Expiratory channel connector • PC 1786 Expiratory channel cassette • PC 1789 Remote alarm connector
Polymeric material – total 9% • PA (Polyamide) • POM (Polyoxymethylene) • SI (Silicone) • TPE (Thermoplastic elastomer) • PUR (Polyurethane) • ABS (Acrylicnitrilebutadienstyrene) • EPDM (Ethylenepropylenedienemonomer) • PTFE (Polytetrafluoroethylene) • FPM (Fluororubber)
Other electronics
• NBR (Nitrilerubber)
• TFT assembly including backlight
• PP (Polypropylene)
• Touch screen (glass)
• PVC (Polyvinyl chloride)
• O2 cell, containing caustic lime and lead (Pb)
• PS (Polystyrene)
• O2 Sensor, containing PC boards
Electronics – total 14%
• Gas module Air, containing multiple PC boards • Gas module O2, containing multiple PC boards • AC/DC Converter, containing PC boards
• Battery modules Nickel-Metal Hydride • Printed circuit boards, cables etc.
• Expiratory cassette
Others – very small amounts
• Expiratory valve coil
• Filter paper of fibre glass
• Safety valve pull magnet • Battery modules Nickel-Metal Hydride • Optional function modules 2
MTS-07-0007
Product End-of-Life Disassembly Instructions
SERVO-i Ventilator System
To open: 1. Disconnect cable. 2. Remove six screws and separate the unit.
Glass
0
PC board
0
MTS-07-0007
$
PC board
Other electronics
3
SERVO-i Ventilator System
Product End-of-Life Disassembly Instructions
Nickel-Metal Hydride battery
Other electronics
4
MTS-07-0007
Product End-of-Life Disassembly Instructions
SERVO-i Ventilator System
To open: 1. Pull off filter. 2. Remove four screws. 3. Lift off cover.
PC board Lithium battery on PC boards
{
PC board PC board
Other electronics
$
0 $
0
' 0 MTS-07-0007
5
SERVO-i Ventilator System
Product End-of-Life Disassembly Instructions
Other electronics
PC board Other electronics
PC board
6
PC board
PC board
MTS-07-0007
Product End-of-Life Disassembly Instructions
SERVO-i Ventilator System
Sealed unit, contains caustic lime and lead
Other electronics
Other electronics PC board Other electronics
PC board
Other electronics
MTS-07-0007
7
© Maquet Critical Care AB, 2007. All rights reserved. MAQUET reserves the right to modify the design and specifications contained herein without prior notice. Document No.: MTS-07-0007. April 2007. Price group:1. Printed in Sweden.
Maquet Critical Care AB SE-171 95 Solna, Sweden Phone: +46 8 730 73 00 www.maquet.com/criticalcare
For local contact: Please visit our website www.maquet.com
GETINGE GROUP is a leading global provider of equipment and systems that contribute to quality enhancement and cost efficiency within healthcare and life sciences. Equipment, services and technologies are supplied under the brands ARJO for patient hygiene, patient handling and wound care. GETINGE for infection control and prevention within healthcare and life science and MAQUET for Surgical Workplaces, Cardiopulmonary and Critical Care.