Quick Start
1 Page
Preview
Page 1
GRPRO 2.1
QUICK START 1
5
FILL RESERVOIR
PRESS POWER
Add water to the reservoir fill-line. DO NOT OVERFILL.
6 CHOOSE MODE
2
a) PROGRAM
or
b) MANUAL
ADD ICE Add it to top of reservoir. Replenish the ice as necessary.
3
Manually set the time
for Program Mode.
using the -/+ buttons.
Push button repeatedly
to outlet
to reach programs 1-6.
CONNECT POWER
Refer to User Manual
Manually set the
or ask your care
desired pressure.
provider for a list of
Connect AC Adapter to grounded
program options.
outlet, then to Control Unit.
4
Push Program button
click
7
CONNECT WRAP
PRESS PLAY/PAUSE
Connect Hose to Wrap, then to
Press the Play/Pause button to begin treatment.
Control Unit. Apply Wrap. Use the knob to adjust the temperature as needed.
WARNING: Follow the recommendations of your health care practitioner regarding the frequency and duration of use. Improper placement or prolonged use of the GRPro 2.1 could result in tissue damage. Discontinue use immediately if you experience burning, itching, or increased pain and swelling. Monitor the skin receiving cold therapy frequently and discontinue use if changes such as blisters, increased redness, discoloration, or welts occur. 1.888.GameReady +510.868.2100 www.gameready.com
WARNING: It is mandatory to fully read and understand the User Manual before using the device. Failure to follow operating instructions could result in serious injury. IMPORTANT: Read complete indications, contraindications, cautions, and warnings before using this product.
© 2017 CoolSystems, Inc. All rights reserved. GRPro 2.1 Control Unit Quick Start PN 705068 Rev A