Quick Reference Guide
12 Pages
Preview
Page 1
POWERING UP CONNECTING WRAPS IMPORTANT: Read complete indications, contraindications, cautions, and warnings in User Manual before using this product
QUICK REFERENCE This Quick Reference is for use after the Med4 Elite has been properly set-up in the clinical environment and is completely filled with distilled water.
ON/OFF After you switch the power on, press the amber On/Off button. The Med4 Elite operating system takes up to 60 seconds to load.
Click connector into place
Disconnect Button
CONNECT WRAP
1
Connect the desired Wrap to the connector Hose. The Hoses are marked with Patient Icons. NOTE: Always return the Hose to the correct Hose holster and wrap the Hose around the Hose hanger when not in use. © 2017 CoolSystems, Inc. All rights reserved. Med4 Elite Quick Reference PN 704589 Rev D
SELECTING A THERAPY FOUR THERAPY OPTIONS
COLD HEAT COMPRESSION-ONLY RAPID CONTRAST IMPORTANT: Read complete indications, contraindications, cautions, and warnings in User Manual before using this product
QUICK REFERENCE
1 SELECT PATIENT After properly connecting the Wrap, select the Patient number that corresponds with the number on the Connector Hose.
2 SELECT THERAPY The Select Therapy screen appears with four active therapy icons. Choose the desired therapy type to begin setting it up.
FOUR THERAPY OPTIONS
Cold Therapy
Heat Therapy
CompressionOnly Therapy
Rapid Contrast Therapy
© 2017 CoolSystems, Inc. All rights reserved. Med4 Elite Quick Reference PN 704589 Rev D
STARTING A THERAPY
IMPORTANT: Read complete indications, contraindications, cautions, and warnings in User Manual before using this product
QUICK REFERENCE
3
THERAPY SETTINGS After selecting a therapy type, choose therapy settings:
TIME COMPRESSION SETTINGS LEVELS
HEAT RESERVOIR TEMPERATURE SETTINGS
SNOOZE SETTINGS COLD RESERVOIR (COLD THERAPY ONLY) TEMPERATURE The system's master Snooze feature SETTINGS
SWITCH PATIENT
TEMPERATURE SCALE
is disabled by default. Enable it in System Settings.
Use the decrease and increase buttons to adjust the various settings including temperature, time, and compression levels.
4
START THERAPY Press the green Start Button when you’re ready to begin the therapy session.
Once a therapy has started, you may Pause and/or Stop at any time. © 2017 CoolSystems, Inc. All rights reserved. Med4 Elite Quick Reference PN 704589 Rev D
PAUSING CHANGING, OR STOPPING THERAPY IMPORTANT: Read complete indications, contraindications, cautions, and warnings in User Manual before using this product
QUICK REFERENCE PAUSING THERAPY SETTINGS You may pause a therapy at any time. To resume the paused therapy without any adjustments, press the Start button. 1. Press the Pause button 2. Press the Start button to resume
CHANGING THERAPY SETTINGS You may change therapy session settings only while treatment is paused. 1. Press the Pause button 2. Press the Adjust Therapy Settings icon and adjust settings as desired 3. Press the Start button to resume with new settings
STOPPING A THERAPY You may stop a therapy at any time. To stop, press the Stop button. The therapy session stops and the Select Therapy screen appears. The therapy settings cannot be adjusted. A new therapy session can then be started with new settings.
© 2017 CoolSystems, Inc. All rights reserved. Med4 Elite Quick Reference PN 704589 Rev D
TWO PATIENT THERAPY
IMPORTANT: Read complete indications, contraindications, cautions, and warnings in User Manual before using this product
QUICK REFERENCE TWO PATIENTS / SAME THERAPY TYPE For two patient therapy sessions, the heat and cold reservoirs are shared between patients. Therefore, the temperatures will be the same for both patients. When setting up a therapy for the second patient that uses the same reservoir as the first patient, the therapy temperature selection (+ or -) buttons will be inactive. The reservoir temperature will remain at the temperature set for the first patient. If a different temperature is desired, all therapies must first be paused in order to adjust the reservoir temperature.
TO ADJUST THE RESERVOIR TEMPERATURE: 1. Pause treatment on the first patient, and adjust the temperature (This new temperature will be the same for both patients.) 2. Resume therapy for the first patient by pressing the Start button 3. Now set up the second patient and Press the Start button to begin therapy
TWO PATIENTS / DIFFERENT THERAPY TYPE 1. Connect the unused Hose to the second patient 2. Select Patient 1 or Patient 2 on the Select Patient screen to match the Hose selected 3. Set up the second patient therapy and Press the Start button to begin therapy © 2017 CoolSystems, Inc. All rights reserved. Med4 Elite Quick Reference PN 704589 Rev D
TROUBLE– SHOOTING
IMPORTANT: Read complete indications, contraindications, cautions, and warnings in User Manual before using this product
QUICK REFERENCE ALARMS
NOTE: Always use distilled water when filling the reservoirs.
CONSULT USER MANUAL Consult User Manual for troubleshooting alarms
ERROR CODES If the Med4 Elite displays an error message during a therapy session, the Control Unit will turn off the power supply. Make note of the error code, and in the U.S. contact Game Ready Technical Support at 1.888.GameReady (1.888.426.3732) or 1.510.868.2100. From outside the U.S., contact your local distributor.
FOR REPAIR In the event the Med4 Elite requires repair, work must be done by a Game Ready authorized agent. Contact Game Ready & Technical Support at:
1.888.GameReady (1.888.426.3732) or 1.510.868.2100. From outside the U.S., contact your local distributor.
EMERGO EUROPE
0086
Prinsessegracht 20 2514 AP The Hague The Netherlands
COOLSYSTEMS ®,INC. 1800 Sutter Street, Suite 500 Concord, CA 94520 USA 1.888.GAMEREADY +1.510.868.2100 www.gameready.com www.gameready.com/patents
EMERGO AUSTRALIA 201 Sussex Street Darling Park, Tower II, Level 20 Sydney NSW 2000 Australia
© 2017 CoolSystems, Inc. All rights reserved. Med4 Elite Quick Reference PN 704589 Rev D