Medartis AG
Screwdriver Disassembly / Assembly Guide
2 Pages
Preview
Page 1
Step by Step – Disassembling the Screwdriver M-2440 / M-2441 Step 1 (if M-2443 / M-2483 are available)
Step 2 (if M-2442 is available)
Step 3 (if M-2442 is available)
A B
Remove the screwdriver’s rotation knob
Turn the screwholding fork into the unlocking position
A Push the screwholding fork forwards until the clip releases B Remove the screwholding fork in a forwards direction
Step 4
Step 5
Step 6
A
B
A Screw on the shaft B Remove the shaft from the sheath
A Loosen the head from the sheath by turning it from « » to « » B Remove the sheath from the head
For Instructions for Use see www.medartis.com/meta/downloads/instructions-for-use/
Disinfection and cleaning
MANDIBLE-07001021-v0 / 2015-07
A
B
1
Step by Step – Assembling the Screwdriver M-2440 / M-2441 Step 2 (if M-2442 is available)
B
A A
Step 3 (if M-2442 is available)
B
Check that the EN number on the sheath, head and shaft match
A Insert the head into the sheath until it engages B Turn the head from « » to « » until it locks
Push the shaft into the sheath and screw this tightly in place
Step 4
Step 5 (if M-2442 is available)
Step 6 (if M-2442 is available)
Oil service – After internal cleaning, before each sterilization
Push the screwholding fork until it audibly engages
Pay attention to the positioning and tighten the clip
For Instructions for Use see www.medartis.com/meta/downloads/instructions-for-use/
MANDIBLE-07001021-v0 / 2015-07
Step 1 (if M-2443 / M-2483 are available)
2