Moria

20218X1

Addendum to Instructions for Cleaning, Sterilization, and Maintenance Composites Instruments Rev E Dec 2016

2 Pages

Addendum for #65099 instruction  Cleaning protocol in the cleaning space for Composites Squeeze Forceps Tap Water rinsing Step 1  Step 2  Remove protector tip Activate forceps mechanism 5 times  Tap Water rinsing Step 3  Lumen for cleaning With the 5ml syringe and special cannula, flush cleaning solution 5 times per lumen  Clean body of instrument with soft brush without touching tube or active parts, until all visible soil has been removed  Immersion in neutral Ph cleaning solution*  Minimum 30 seconds  How to remove and put the protector tip  Manual cleaning  US Bath Cleaning  Tap Water rinsing  Step 4  Step 5  To remove the protector, squeeze and move back the forceps till the head (circled on the photo) is out.  Rinsing Step 6  Remove the forceps using the openning without touching it with the active parts. Proceed in reverse order to replace the protector. When putting back the protector check that the forceps is well positionned  Minimum 30 seconds  With the 5ml syringe and special cannula, flush demineralized water*  Immersion in demineralized water*  Drying  Tools  Step 7  #19149  With the 5 ml syringe and special cannula, flush air 5 times per lumen  Cleaning brush Syringe luer lock 5 ml  (a bigger size will make the flushing difficult) Wipe instrument with a non woven lint free disposable cloth  Dry with filtered dry air  #61080  Cleaning cannula  *Temperature: 40°C/104°F (Do not exceed 45°C / 113°F)  To obtain more information MORIA SA 15, rue Georges Besse 92160 Antony FRANCE Phone: +33 (0) 1 46 74 46 74 Fax: +33 (0) 1 46 74 46 70 www.moria-surgical.com  MORIA #65100-E-12.2016  Minimum 30 seconds  US bath with fresh neutral Ph cleaning solution* Sonificate for 5 mn
File Type: PDF
File Size: 1.03 MB
File Name: Moria - 65100 - Addendum to Instructions for Cleaning, Sterilization, and Maintenance Composites Instruments Rev E Dec 2016 - 2016-12 - Rev E.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions