NUWEIGH LOG244-MS2400 User Manual

USER MANUAL

2

TABLE OF CONTENTS

INTRODUCTION

3

POWER

3

LOW BATTERY

3

SPECIFICATIONS

3

DISPLAY AND KEY FUNCTIONS

4

ERROR MESSAGE

5

USER MANUAL

3

INTRODUCTION All scales come complete with plastic platform, plastic base, and two soft steel handles. The keyboard has three easy to use functions keys:   

ON/OFF/TARE kg/lb MEMORY

With the standard AC adaptor included and the 9V battery, the scale can be used in a fixed location or as a portable scale.

POWER The baby scale uses 9V battery or 9V 200mA AC adapter.

LOW BATTERY 1.

(Low battery indication) will display on the LCD display when the battery’s power is insufficient to power the scale.

2. When is displayed, the operator has to replace battery or plug in DC adaptor instead of 9V battery.

SPECIFICATIONS MODEL LOG244

Capacity

20 kg x 0.01 kg, 44 lb x 0.02 lb, 704 oz x 0.5 oz

Weight units

Kg, lb, oz

Power Supply

9V battery / 9V 200mA AC adaptor

Display

Easy to read 1.0” LCD display with 4 1/2 active digits

Operation Temperature

C ~ 35℃

Function Key

ON/OFF/TARE, kg / lb, MEMORY

Dimensions

Scale with handle: 620 x 350 x 50 mm Platform surface: 500 x 350 x 50 mm

USER MANUAL

DISPLAY AND KEY FUNCTIONS

KEY FUNCTIONS: TARE/ON /OFF    

Power on when scale off. When there’s load on platform, press this key to return zero. Put a container on platform, press this key to tare the weight, and the tarred value is stored. Press and hold for 3 seconds to power off when scale on.

kg/lb  

Press this key to toggle between kg, lb, oz, In normal mode, press this key 3 seconds to enter setting mode.

MEMORY  

When weight value is lock, press this key to store the value. If the weight is less than 1kg, press this key to recall the stored value of weight. If the weight is over 1kg, press this key to store the weight value.

HOLD   

When power on, the HOLD feature will auto switch on and the arrow at left bottom of LCD will flash. When the loaded weight is above 1kg and stable, the arrow stops flashing. To disable the hold function, please press TARE/ON/OFF key again.

4

USER MANUAL

5

ERROR MESSAGE LOW BATTERY If battery is discharged, the display with show LOW. The operator should replace the battery.

OVER ZERO If zero count is higher than the setting range, the display will show “Err” message. The scale will turn off in 120 seconds if the status continues.

UNDER ZERO If zero count is below the setting range, the display will show “Err” message. The scale will turn off in 30 seconds if the status continues.

OVERLOAD If the total load exceeds the maximum capacity of the scale, the display will show “Err” message. The weight must be removed immediately from the surface.