Nuweigh LOG244 Operator Guide

2

Operator Guide INTRODUCTION

All scales come complete with plastic platform, plastic base, and padded alloy handles. The keyboard has three easy to use function keys: • • •

ON / ZERO/ OFF kg / lb MEMORY

With the standard AC adaptor included and the 9V battery, the scale can be used in a fixed location or as a portable scale.

MODEL NUMBER LOG 244.

POWER The baby scale uses 9V battery or 9V 100mA AC adapter.

LOW BATTERY 1

(Low battery indication) will display on LCD display when battery’s power is insufficient to power the scale.

2

When

is displayed, the operator has to replace battery or plug in DC adaptor instead of

9V battery.

SPECIFICATIONS Capacity Weight Units Power Supply Display Operation Temperature Function Key Dimensions

20kg x 0.01kg, 44lb x 0.02lb, 704oz x 0.5oz Kg, lb, oz, lb:oz 9V battery / 9V 100mA AC adaptor Easy to read 1.0” LCD display with 4½ active digits 5ºC - 35ºC ON/ZERO/OFF, KG/LB, MEMORY Scale with handle: 620 x 350 x 50mm Platform surface: 500 x 350 x 50mm

IMPORTANT NOTE ON THE ACCURACY OF YOUR SCALES Nuweigh Australia, recommends that your scale/s have regular calibration checks carried out by an authorised Nuweigh Service Technician. It is important to ensure regular maintenance and calibration checks are carried out on your scale/s to maintain a consistent accuracy.

3

Operator Guide DISPLAY AND KEY FUNCTIONS kg

lb

oz

MEMORY

HOLD

Kg/Lb

ON ZERO OFF

Capacity: 20kg x 0.01kg 44lb x 0.02lb

Key function: 1

On/Zero/Off 1 2 3

2

Kg/Lb 1 2

3

Power on when scale off. When there is a load on platform, press this key to return to zero. Press and hold for 3 seconds to power off when scale on.

Press this key to toggle between kg, lb, oz and lb:oz In normal mode, press this key for 3 seconds to enter setting mode.

Memory 1 2

When weight value is locked, press this key to store the value. If the weight is under 1kg, press this key to recall the stored value of weight. If the weight is over 1kg, press this key to store the weight value.

FEATURES 1

Hold 1 2 3

When power is on, the HOLD feature will auto switch on and the arrow at left bottom of LCD will flash. When the loaded weight is above 1kg and stable, the arrow stops flashing. To disable the hold function, please press ON/ZERO/OFF key again.

4

Operator Guide ERROR MESSAGE 1

Low Battery If battery is discharged, the display will show LOW. The operator should replace the battery.

2

Over Zero If zero count is higher than the setting range, the display will show “Err” message. The scale will turn off in 120 seconds if the status continues.

3

Under Zero If zero count is below the setting range, the display will show “ErrL” message. The scale will burn off in 30 seconds if the status continues.

4

Overload It the total load exceeds the maximum capacity of the scale, the display will show “Err” message. The weight must be removed immediately from the surface.

LOW

Err ErrL Err

NEWCASTLE WEIGHING SERVICES PTY LTD Head Office 104-114 Hannell Street Wickham NSW 2293 Telephone: 02 4961 4554 Facsimile: 02 4962 1137 Website: www.nws.com.au

N4103