PORTACOUNT MODEL 8040 and 8048 Quick Start Guide Rev F.pdf
Page 1
PORTACOUNT® MODELS 8040 and 8048 RESPIRATOR FIT TESTERS
QUICK START GUIDE
Thank you for purchasing a PortaCount® Respirator Fit
Tester. For further information, please visit us online at
www.tsi.com/PortaCount-Respirator-Fit-Tester-Models8040-and-8048. This guide will help you to quickly begin
using your PortaCount with a personal computer or tablet.
W AR N I N G
The use of controls, adjustments, or
procedures other than those specified in this
manual may result in exposure to hazardous
optical radiation.
3. Initial PortaCount Respirator Fit Tester
Start-Up
Plug the PortaCount Fit Tester into an AC power source
using the power supply provided. Press the On/Off button
to turn it on
.
4. FitPro Ultra Software Start-Up
Start the FitPro Ultra software and follow the on-screen
instructions.
5. Verify Communications
A급 기기 (업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파적합기기로서
판매자 또는 사용자는 이 점을 주의하시기
바라며, 가정외의 지역에서 사용하는 것을
목적으로 합니다.
When FitPro Ultra software launches it will automatically
search for all available PortaCount Fit Testers. It will list
them according to their serial numbers and provide you
with an option to connect. If you do not see the instrument
you want to connect with, please make sure it is powered
on and verify the USB connection.
1. Software Installation
Further Learning
Use your tablet or computer to access the TSI software
and firmware wizard at: https://www.tsi.com/support/tsisoftware-and-firmware-wizard/. Follow the instructions to
download the software. Then run the FitPro™ Ultra Fit
Test Software installer. For questions refer to detailed
software installation instruction sheet included in your
instrument case. Or call Customer Support at 1-800-6801220 (USA), (651) 490-2860, or 001 651 490-2860
(International) or visit www.tsi.com/support.
You are now ready to learn about the daily operations of
the PortaCount Fit Tester and FitPro Ultra Software.
Refer to the PortaCount Respirator Fit Tester Operation
and Service Manual. The manual is available for download
from the TSI website.
For further training on fit testing with the PortaCount Fit
Tester refer to the PortaCount Academy website at
www.tsi.com/pcacademy.
2. Communications Setup
Connect your tablet or computer to the PortaCount Fit
Tester via the USB cable provided.
Connect the “USB-A” plug connection to the
computer.
Return for Service
To return the instrument, complete the “Service Request”
form at www.tsi.com/service or call TSI at 1-800-680-1220
(USA), (651) 490-2860, or 001 651 490-2860
(International) for specific return instructions.
Connect the “USB-C” plug connection to
the back of the PortaCount Fit Tester.
USA
UK
France
Germany
Tel: +1 800 680 1220
Tel: +44 149 4 459200
Tel: +33 1 41 19 21 99
Tel: +49 241 523030
P/N 6010632 Rev. F
India
Tel: +91 80 67877200
China
Tel: +86 10 8219 7688
Singapore Tel: +65 6595 6388
©2019 TSI Incorporated
Printed in U.S.A.
TSI, TSI logo, and PortaCount are registered trademarks of TSI
Incorporated. FitPro/FitPro+ is a trademark of TSI Incorporated.
Microsoft, and Windows are registered trademarks of Microsoft
Corporation.