TERAOKA
DS-673SS DIGI Manual
Manual
3 Pages
Preview
Page 1
1. Display and Indicators
kg
DS-673SS
lb
1.1. Display Specifications * Weight Display : 6 digits. * Special Display : 6 digits. * Decimal point : Selectable by SPEC. 1.2. Indicators *
: On when battery is weak and needs to charge, blink when charging. (only for rechargeable battery type).
*
: On when tare subtraction is performed.
*
: On when zero point is adjusted and weight is stable.
*
: On when weight display in kg (only for 4 keys version).
*
lb
*
: On when weight display in lb (only for 4 keys version). : On when Battery is charging (only for rechargeable battery type).
2. Dimensions * Overall size :
342(W)*200(D)*400(H)mm.
3. External Connectors * DC jack.
4. Main Components : Renesas R5F21254(16bit, 16K ROM) / R5F21255(16 bit, 24K ROM) / R5F21256(16 bit, 32K ROM) / R5F21257(16 bit, 48K ROM). : LED.
* Microcomputer * Display device
12. Existing parts to be used * LED (DS-650E). * Adaptor 12V,1.5A,
5. Key Functions *
: ON/OFF key. To turn display on or off.
*
: RE-ZERO key. To resets weight display to zero.
*
: TARE key. To set or clears tare value.
*
: UNIT key. To changes measurement base (only for 4 keys version).
SHANGHAI TERAOKA ELECTRONIC CO., LTD.
1 of 8
5. Operations In Weighing Mode 19.1. ON/OFF 1 - ZERO
OPERATION [ON/OFF]
DISPLAY
1
2
8.8.8.8.8.8.
2 - NET
REMARKS Display for 1 seconds. Blank for 1 seconds.
8.8.8.8.8.8.
Display for 1 seconds. Blank for 1 seconds.
8.8.8.8.8.8. Ready to operate
0.0 0 0
Weighing mode.
[ON/OFF]
Display off.
5.2. Reset and Weighing Check All weighing operations will be performed based on the procedure shown below. Operator should check this operation before any transactions. 1 - ZERO
OPERATION Stand-by-status
DISPLAY
1
2
2 - NET
REMARKS
0.0 0
[REZERO]
88888
Reset the zero point.
0.0 0 Place an item on the platter. (e.g. 1.00kg)
1.0 0 0
Remove the item from platter
0.0 0 0
5.3. Tare Subtraction 1 - ZERO
OPERATION
DISPLAY
Stand-by-status
0.0 0 0
Put tare (e.g
0.0 3 0
30 g) on platter
[TARE]
0.0 0 0
Remove the tare weight
- 0.0 3 0
[TARE]
0.0 0 0
1
2
2 - NET
REMARKS
Subtract the tare weight. Clear the tare weight.
5.4. Automatic Shut-Off Timer Setting 1 - ZERO
OPERATION
DISPLAY
1
2
REMARKS
Display off Depress [ON/OFF] Keep pressing for 3s
3
Release [ON/OFF]
8.8.8.8.8.8.
Ready to operate
0.0 0 0
[ON/OFF]
Set Automatic shut-off timer to 3 minutes. Weighing mode. Display off.
Depress [ON/OFF] Keep pressing for 3s
3
Keep pressing for 6s
10
Release [ON/OFF]
8.8.8.8.8.8.
Ready to operate
0.0 0 0
[ON/OFF]
Set Automatic shut-off timer to 10 minutes. Weighing mode. Display off.
Depress [ON/OFF] Keep pressing for 3s
3
Keep pressing for 6s
10
Keep pressing for 9s
999
SHANGHAI TERAOKA ELECTRONIC CO., LTD.
2 of 8
2 - NET
Release [ON/OFF]
8.8.8.8.8.8.
Set NO Automatic shut-off.
Ready to operate 0.0 0 0 Weighing mode. *NOTE : The setting data registered in the memory keeps effectiveness unless new data is established.
5.5. Display Dimmer Setting 1 - ZERO
OPERATION
DISPLAY
Stand-by-status
1
2
2 - NET
REMARKS
0.0 0 0
[RE-ZERO]
888888
Enter [TARE] [TARE] [TARE] while depressing
[RE-ZERO] + [TARE] [TARE] [TARE]
≡≡ 1 ≡≡
[RE-ZERO]
≡≡ 2 ≡≡
[RE-ZERO]
≡≡ 3 ≡≡
[RE-ZERO] key to increase dimmer level.
[ON/OFF]
≡≡ 2 ≡≡
[ON/OFF] key to decrease dimmer level.
[TARE]
0.0 0 0
[TARE] key to store setting & escape to Weighing mode.
[RE-ZERO].
Display current dimmer level.
5.6. kg and lb Conversion (For 4 keys version only. Available when SPEC08 = 001) 1 - ZERO
OPERATION
DISPLAY
Stand-by-status
0.0 0 0
Put product on platter
0.5 0 0
Remove product from platter
0.0 0 0
[UNIT] *note
1
2
3
4
2 - NET
3 - kg
4 - lb
REMARKS
Weight in kg.
POUND
Change to lb, display for 2 seconds.
0.0 0 0 Put product on platter
1.1 0 0
[UNIT] *note
Weight in lb.
METRIC
Change to kg, display for 2 seconds.
0.5 0 0 Remove product
0.0 0 0
*NOTE: The operation can not be executed when Tare Subtraction is performed.
5.7. Set Default Weight Unit (For 4 keys version only. Available when SPEC08 = 001 or SPEC08 = 010) 1 - ZERO
OPERATION
DISPLAY
Stand-by-status
1
2
2 - NET
REMARKS
0.0 0 0
[RE-ZERO]
888888
Enter [UNIT] [UNIT] [UNIT] while depressing
[RE-ZERO] + [UNIT] [UNIT] [UNIT]
METRIC
[RE-ZERO]. Display default weight unit setting.
[ON/OFF]
POUND
[ON/OFF] key to select weight unit.
[TARE]
0.0 0 0
[TARE] key to store setting & escape to Weighing mode.
6. Error Massage List The following error message will appear when an incorrect operation is performed. Message
Remarks
Appropriate Operation
When scale is not steady when power on.
Place scale on firm, flat base.
OF
When weight exceeds capacity+9d, or something is on the platter when power on.
Remove the item on the platter.
UF
888888
When negative weight exceeds display limit.
REZERO or ON/OFF again.
Error
When error occurs in maintenance mode.
Repeat operation.
E R R 01
When A/D error.
Contact dealer.
E R R 02
When data flash erase error.
Contact dealer.
E R R 03
When data flash program error.
Contact dealer.
SHANGHAI TERAOKA ELECTRONIC CO., LTD.
3 of 8