Enterprise Accessories for Models 5000, 8000 and 9000 Sept 2011

Contents 3 ��������������������������������������������������������������������������������������������������������������������������������A Complement to Enterprise® Beds 4 �������������������������������������������������������������������������������������������������������������������������������������������������� Safety Side Accessories 6 ����������������������������������������������������������������������������������������������������������������������������������������������� Intravenous Infusion Poles 8 ���������������������������������������������������������������������������������������������������������������������������������������������������������� Accessory Holders 10 ���������������������������������������������������������������������������������������������������������������Monitor Shelves, Push Handles and Handsets 12 ����������������������������������������������������������������������������������������������������������������� Lifting Poles and Miscellaneous Accessories 14 �������������������������������������������������������������������������������������������������������������������������������������������� Miscellaneous Accessories 15 ���������������������������������������������������������������������������������������������������������������������������������������� Compatibility and Exceptions

2

a complement to enterprise beds The Enterprise 5000/8000/9000 bed range has an extensive offering of accessory items, which both complements the bed and provides additional benefits for patients and carers. Designed specifically for the Enterprise bed range, these accessories reflect the same high quality and standards as the beds themselves. Enterprise accessories can be ordered independently of the bed, and can be fitted retrospectively to the bed as required (unless otherwise stated). All accessories have been fully tested to ensure compatibility with the Enterprise bed models specified.

This brochure is applicable to Enterprise 5000, 8000 and 9000 models. Please be aware that these accessories are not compatible with 1000 and 3000 models.

3

safety side accessories

Enterprise safety sides comply with all international safety standards. The following accessories are designed to provide additional safety for specific environments and enhanced patient comfort when desired.

4

[product listing]

Safety Side Height Extensions ENT-ACC54

The safety side height extension increases the height of the raised safety side by 120 mm. This accessory is specific to Enterprise 5000. (Supplied as a pair)

Safety Side Pads ENT-ACC06

Safety side pads for ¾ length folding safety rails. These pads are designed for Enterprise 5000 range. (Supplied as a pair)

Safety Side Pads ENT-ACC31

Safety side pads for split safety sides. These pads are designed for Enterprise 8000 and 9000 ranges. (Supplied as a pair)

Foot End Infill Panels ENT-ACC22

The infill panels have been designed to fill the gap between the foot end panel and foot end safety side as required. The panels can slot quickly and easily into place. (Supplied as a pair)

5

intravenous infusion poles

There are several IV poles available for the Enterprise bed range. Each one is designed to cater for varying medical needs within a hospital environment.

[product listing] Integral IV Pole ENT-ACC29

Conveniently located height adjustable IV pole permanently fixed at the head end of the bed. Please note this accessory is only available on selected models. Supplied with base buffer kit (ENT-ACC57) included. This item is factory fit only Safe working load 2 kg per hook Height range 810 mm–1390 mm

6

[product listing]

IV Pole ENT-ACC02

This height adjustable two hook IV pole is designed to support fluid bags and other IV equipment. Safe working load 2 kg per hook Height range 1050 mm–1891 mm

Angled IV Pole ENT-ACC04

This two hooked angled IV pole offers greater flexibility for optimal positioning. Safe working load 2 kg per hook Height range 1303 mm–2068 mm

Heavy Duty IV Pole ENT-ACC24

A height adjustable IV pole with an increased safe working load featuring four stainless steel hooks. Safe working load 5 kg per hook Height range 1045 mm–1880 mm

Syringe Pump Holder ENT-ACC07

Designed with two hooks on a wide 25 mm diameter pole, for the attachment of a syringe pump or similar equipment. Safe working load 2 kg per hook Plus 10 kg clamped to pole Height 1162 mm

4 Hook Adapter ENT-ACC14

Two hook accessory fits on ENT-ACC02, ENT-ACC04 and ENT-ACC07 to convert these products into four hook IV poles. Safe working load 2 kg per hook

7

accessory holders

The versatile design of the oxygen cylinder holders (ENT-ACC08 and ENT-ACC18) allows use of an IV pole in conjunction with these accessories. ArjoHuntleigh offers a range of accessories used for storing ancillary equipment on the bed.

[product listing] Oxygen Cylinder Holder ENT-ACC08

This holder is for UK sizes CD, PD, E & D cylinders and also fits US size E cylinders.

Oxygen Cylinder Holder ENT-ACC18

This holder is for French B5 Cylinders.

8

accessory holders [product listing]

Drainage Jar Holder ENT-ACC17

Designed to hold suitable drainage jars and is positioned at the head end of the bed. Capacity 2 litres

Bed Pan Holder ENT-ACC56

The bed pan holder is designed to be hung on the outside of the foot end panel for easy access. Safe working load 1 kg

Oxylog® Equipment Bracket ENT-ACC40

Designed to support portable ventilation equipment. Foot end mounted. Safe working load 20 kg

Double Bottle Holder ENT-ACC12

Stores two 500 ml fluid/drainage bottles. Mounts on the drainage bag rail located beneath the mattress platform.

Urine Bottle Holder ENT-ACC19

The bottle holder can be hung on the safety side for easy access.

9

monitor SHELVES, PUSH HANDLES & HANDSETs

There are two types of monitor shelf available (standard and wide) depending upon the equipment to be used. Both have adjustable straps to secure the monitor in place and can be conveniently folded away when not in use. An additional set of handles at the head end of the bed provides open access to the patient’s head and upper body, to facilitate use in the ITU department. The push handle accessory, which is applied to the foot end of the bed, provides improved ergonomic handling.

[product listing] Folding Monitor Shelf ENT-ACC20, ENT-ACC53

Designed to support monitoring and diagnostic equipment, at the foot end of the bed. ENT-ACC20 fits standard width bed ENT-ACC53 fits narrow bed Safe working load 12 kg

Wide Folding Monitor Shelf ENT-ACC36, ENT-ACC55

Designed to support monitoring and diagnostic equipment, at the foot end of the bed. ENT-ACC36 fits standard width bed ENT-ACC55 fits narrow bed Safe working load 12 kg

10

[product listing]

ITU Head End Panel ENT-ACC34

This head end panel is designed for use in ITU departments where easy access to the patient’s head and upper body is required at all times. Designed with push handles for ease of transport and maneuverability.

Push Handle ENT-ACC41

The push handle provides a bar at the foot end of the bed to aid transport and maneuverability.

Attendant Control Panel Holder ENT-ACC11

The handset holder allows the ACP to be positioned at a convenient height and angle at the foot end of the bed. For use with Enterprise 5000 range

Additional Patient Handset ENT-ACC49

An additional handset with a flexible cord is available which duplicates the controls on the standard patient handset. This item is factory fit only

Additional Patient Handset (height adjustable) ENT-ACC50

This handset with a flexible cord provides all the features on the standard handset, plus an additional button to adjust the height of the mattress platform. This item is factory fit only

11

LIFTING POLES AND MISCELLANEOUS ACCESSORIES

In addition to lifting poles, there are several miscellaneous accessories available designed to further enhance the functionality of the bed. From a simple storage hook to a servicing kit, ArjoHuntleigh has endeavoured to provide all accessories that may typically be required during the lifetime of an Enterprise bed.

12

[product listing]

Lifting Pole (3 position) ENT-ACC03

The lifting pole is designed to assist the able patient to re-position themselves on the bed. In this case, the pole can be rotated in an arc from the bed frame, assisting with wheel chair transfers. An extendable strap and handle are included. Safe working load 75 kg

Lifting Pole (fixed) ENT-ACC01

This lifting pole adopts a centralized position over the bed and assists patients in positioning themselves on their bed. The accessory is supplied with an adjustable strap and handle. Safe working load 75 kg

IV Bag Holder ENT-ACC13

Attachment fits onto lifting poles ENT-ACC01 and ENT-ACC03 to support fluid bags and other IV equipment. Safe working load 2 kg per hook

Head End Traction Assembly ENT-ACC32

Head end clamp-on traction assembly is intended for use in applying traction to a patient’s head, arms and upper body. One adjustable height pulley is provided. Note; cords and weights are not included Safe working load 20 kg

Transducer Mounting Pole ENT-ACC26

This clamp-on accessory is designed to support ITU/ ICU cardiac pressure transducers and associated equipment.

13

MISCELLANEOUS ACCESSORIES [product listing]

Mains Cable Storage Hook ENT-ACC15

One mains cable storage hook is supplied with each bed as standard. Also available to order separately.

Mains Plug Box (IP66 Compliant) ENT-ACC59

This accessory is for use with washable beds only and can be clipped onto the foot end panel. The plug is stored within the enclosure during the washing process.

Mattress Platform Gap Filler ENT-ACC35

This accessory fits easily and neatly into place underneath the deck sheet.

Servicing Kit ENT-ACC23

The bed servicing kit contains the parts shown right which allows maintenance tasks to be carried out on Enterprise 5000/8000/9000 beds.

14

compatibility and exceptions

Enterprise accessories are designed specifically to enhance the care of patients with optimised solutions and benefits. The wide choice of options available enhance and improve the quality of life for patients’ and carers’ daily needs. For any further information please contact your local ArjoHuntleigh representative. Please note that certain accessories are designed for use with specific bed variants. Please refer to the user manual to check the compatibility of the product with specific bed variants and/or other accessories.

15

Printed in the Czech Republic • Point • 01.MB.21.1.GB.1.AHG • September 2011

www.ArjoHuntleigh.co.uk

GETINGE GROUP is a leading global provider of products and systems that contribute to quality enhancement and cost efficiency within healthcare and life sciences. We operate under the three brands of ArjoHuntleigh, GETINGE and MAQUET. ArjoHuntleigh focuses on patient mobility and wound management solutions. GETINGE provides solutions for infection control within healthcare and contamination prevention within life sciences. MAQUET specializes in solutions, therapies and products for surgical interventions and intensive care.

ArjoHuntleigh UK – Head Office

ArjoHuntleigh UK – Service and Technical Centre

310-312 Dallow Road, Luton, Bedfordshire, LU1 1TD, United Kingdom Sales Phone: +44 (0) 1582 745 700 Sales Fax: +44 (0) 1582 745 745 Rental 24hr Helpline Lo-call Phone: +44 (0) 8457 342 000 Rental Fax: +44 (0) 1582 745 843 Email: [email protected]

St Catherine Street Gloucester, GL1 2SL, United Kingdom Phone: +44 (0) 8456 114 114 Service Fax: +44 (0) 1452 525 207 Email: [email protected]

ArjoHuntleigh is a branch of Arjo Ltd. Med. AB. Only ArjoHuntleigh designed parts, which are designed specifically for the purpose, should be used on the equipment and products supplied by ArjoHuntleigh. As our policy is one of continuous development we reserve the right to modify designs and specifications without prior notice. ® and ™ are trademarks belonging to the ArjoHuntleigh group of companies. © ArjoHuntleigh, 2011