GS 300 General Exam Light Instructions

Warnings and cautions (continued) CAUTION: Only authorized Welch Allyn Service Centers can perform service on this product.

GS 300 General Exam Light

Setup instructions

Cleaning

Mobile stand assembly instructions

Specifications

WARNING: Ensure that the device is unplugged from wall socket.

Environment Operating:

Luminaire

CAUTION: There are no user serviceable/replaceable parts.

Electrical Input: 100-240 V~ 50Hz-60Hz, 0.35A max

CAUTION: Rx only.

95°F (35°C)

90%

1060 hPa

Intended use Manual part no. 718916 © 2014 Welch Allyn

The Welch Allyn GS 300 is designed to meet the various needs of the physician’s office, hospital environment and specialist’s office. It is not intended for rendering diagnosis or surgery.

Symbol descriptions

Mounting

See the accompanying manual.

Clean with a damp cloth using warm water and mild detergent or one of the following solutions: • 70 percent isopropyl alcohol • 10 percent mild bleach solution Wipe dry with a clean cloth.

700 hPa

Transport/storage: 95°F (35°C)

90%

1060 hPa

Troubleshooting 50°F (10°C)

Set up

Use indoors.

1.

Caution

15%

Possible cause

Solution

Equipment classification Safety Class I, Continuous Operation

Power supply fault. No power supplied to light.

Verify all cables are connected correctly.

Additional technical information www.welchallyn.com/gsseries

Power on/off.

500 hPa

Approvals IEC 60601-1, UL 60601-1, IEC 60601-1-2, CAN/CSA C22.2 No 601.1-M90, AS/NZS3200

95°F (35°C)

Temperature limits

50°F (10°C)

15%

Table/wall mount

Caution: High intensity light.

Warning

50°F (10°C)

90%

Humidity limitation 15%

1.

1060 hPa 700 hPa

2.

Green light not illuminated Light is not functioning correctly

Atmospheric pressure limitation

Warnings and cautions WARNING: Read and understand the instructions prior to use of this product. Failure to understand the operating requirements for this product may result in injury to yourself, the patient and/or may damage the instrument.

Green light illuminated

WARNING: Use the examination light in its intended working range of 20 in (50 cm). Exposures at closer distances may be harmful to skin. To minimize risk of harm to the skin from optical radiation hazards, minimize illumination intensity at the tissue examination site, minimize exposure times, and take additional precautions when skin sensitivity has been altered through tissue trauma or the use of anesthesia. WARNING: This is a class A product. In a hospital/physician's office environment this product may cause radio interference in which case the user may be required to take adequate measures. WARNING: Do not modify this equipment. Any modification of this equipment can lead to patient injury. Any modification of this equipment voids the product warranty.

Welch Allyn, Inc. 4341 State Street Road Skaneateles Falls, NY 13153-0220 USA www.welchallyn.com Regulatory Affairs Representative Welch Allyn Limited Navan Business Park Dublin Road Navan, County Meath Republic of Ireland

Warranty Two years.

WARNING: Do not operate this product in the presence of flammable anesthetics or other flammable substances in combination with air, oxygen-enriched environments, or nitrous oxide; explosion can result. WARNING: Illumination is intense. Do not stare at the light source in operation. May be harmful to eyes. To minimize risk of harm to the eyes from optical radiation hazards, avoid looking at bright light sources and their reflections, and protect eyes where normal pupil sizes and aversion responses are not present.

Call Welch Allyn Customer Service.

NOTE: This product complies with current required standards for electromagnetic interference and should not present problems to other equipment or be affected by other devices. As a precaution, avoid using this device in close proximity to other equipment.

2. www.welchallyn.com/weee

3. 4. 3.

Patent No.: US D621,981 S

WARNING: Ensure that the mounting bracket is securely anchored to the wall or table, or that the mobile stand is securely assembled, and the exam light is securely fastened to the bracket or stand as directed. Do not hang or place objects on the equipment.