WelchAllyn
WelchAllyn Connex Integrated Wall System
Connex Integrated Wall System Quick Guide Dec 2011
Quick Guide
2 Pages
Preview
Page 1
Handles
Sp02 and NIBP modules
Specula dispenser
USB-to-computer connector
Power cord connector
SureTemp® Plus thermometer
USB connectors (under cover)
Braun ThermoScan® PRO 4000
Accessory bin and SpO2 clip
Storage compartment for probe covers
Welch Allyn Connex® Integrated Wall System Quick Reference Card
Welch Allyn Connex® Integrated Wall System Quick Reference Card Power on/Standby • •
Powers up the monitor Brief press – Sets monitor to Display power saving mode
Battery status Charging Approximate operating time remaining Battery removed or not holding a charge
Input clinician ID with barcode scanner 1.
Touch the Clinician ID section (left edge) of the Device Status area.
2.
Scan the clinician ID with a barcode scanner. The ID appears in the field. Touch Select.
3.
Input patient ID with barcode scanner 104067 Mat. No. 716928, 80016512 Ver. B
1. 2.
Touch the Home tab. Scan the patient’s ID with a barcode scanner. The ID appears in the field.
www.welchallyn.com
CIWS_QRC 716928B.indd 1
2/23/2011 1:07:00 PM
Reset (pause or turn off) audio alarms
Enter manual parameters
Save patient data
1.
After taking patient measurements, touch Save. A message will appear indicating a successful or failed save.
From the Home tab, touch anywhere within the Manual parameters frame. The Manual tab appears.
Manage patient records Patient records can be sent to the network, printed, or deleted. 2. 3.
Touch the up/down arrow keys or the keypad to manually adjust height, weight, pain level, temperature, respiration level, or other parameters. Touch OK to confirm settings and return to the Home tab. Note
Touch
.
Touch the Review tab.
2. 3.
Select records by touching the check box. Touch Send to transmit the records to the network, Print to print the records, or Delete to permanently remove the records.
Entries will not be saved unless you touch OK.
Set modifiers 1.
Adjust alarm limits
Touch
1.
or
Touch the Patients tab.
in the alarming parameter to display alarm controls. Adjust a limit or turn off.
Start/Stop blood pressure
Note 2. 3. 4.
Start automatic intervals 1. Properly size the blood pressure cuff and position it around the patient’s bare upper arm. 2. 3. 4. 5.
On the Home tab, touch . Select Automatic. Use the numeric keypad to enter the length of time between NIBP measurements. Touch Start intervals.
The
icon indicates the records have been sent to and received by the network.
Touch the Modifiers tab. Adjust the settings as required. Touch OK to accept or Clear to delete all entries. Note
Entries will not be saved unless you touch OK.
Technical Assistance USA Canada Australia China
+1 800 535 6663 +1 315 685 4560 +1 800 561 8797 +61 2 9638 3000 +86 21 6327 9631
European Call Center France Germany Italy
+353 46 90 67790 +33 155 69 58 49 +49 695 098 5132 +39 026 968 2425
Japan Latin America Malaysia Netherlands Singapore
+81 3 6383 0852 +1 305 669 9003 +603 7875 3341 +31 202 061 360 +65 6419 8100
South Africa Spain Sweden United Kingdom
+27 11 777 7555 +34 917 499 357 +46 85 853 6551 +44 207 365 6780
© 2011 Welch Allyn. All rights reserved.
www.welchallyn.com
CIWS_QRC 716928B.indd 2
2/23/2011 1:07:02 PM