Propaq CS Quick Guide Rev A June 2005

, SETUP, MORE, CHANGE , ECG, ECG1 LEAD

Change RESP lead

, ECG/RESP, MORE, (NEXT, CHANGE)

Specify auto or manual NIBP

, NIBP, AUTO/MANUAL

Specify waveforms for display

, SETUP, MORE, WAVE SELECT, (NEXT, ON/OFF)

Change HR/PR tone volume

, SETUP, MORE, (NEXT, CHANGE)

View vital sign trends

, SETUP, TRENDS, (NEXT TREND)

Change time/date

, SETUP, MORE, MORE (NEXT, UP or DOWN)

Alarms and Alerts Silence alarm or alert tone for 90 sec or until a new alarm or alert occurs

or SILENCE

Inhibit alarm and alert tones for 4 min

, SETUP, ALARMS, 4 MIN SUSPND

Re-enable a silenced alarm or alert tone

or RESUME

Change alarm tone volume

, SETUP, MORE, (NEXT, CHANGE)

Change alarm limits

, SETUP, ALARMS, LIMITS

Propaq®® CS Vital Signs Monitor

©2005 · Printed in USA · P/N: 810-1103-02 Rev. A 6/05

Change patient mode Change ECG1 lead

NET OFF

Disconnect from Acuity System

■

Consult Directions for Use

■

Silence/Re-enable a patient alarm or equipment alert

■

Start/Stop an NIBP reading

■

Main Menu

START STOP

■

Start/Stop printing

SNAP SHOT

■

Print previous eight seconds

■

Print specified trends

PRINT TRENDS

800 289 2500 · 503 530 7500 · Beaverton, Oregon USA