WelchAllyn

Temperature

Related Documents

Thermo Menu Operation Manual Calibration Tester Model 9600 Welch Allyn 9600 Calibration Tester Ca lib ra tio nT M od est el er 96 00

Calibration Tester Model 9600 Operation Manual Rev C

CareTemp™ Touch Free Thermometer Directions for use © 2014 Welch Allyn... ll rights are reserved... o support the intended use of the product described in this publication, the purchaser of the product is permitted to copy this publication, for internal distribution only, from the media provided by Welch Allyn... o other use, reproduction, or distribution of this publication, or any part of it, is permitted without written permission from Welch Allyn... elch Allyn assumes no responsibility for any injury to anyone, or for any illegal or improper use of the product, that may result from failure to use this product in accordance with the instructions, cautions, warnings, or statement of intended use published in this manual... aution Federal US law restricts sale of the device identified in this manual to, or on the order of, a licensed physician... oftware in this product is Copyright 2014 Welch Allyn or its vendors... ll rights are reserved... he software is protected by United States of America copyright laws and international treaty provisions applicable worldwide... nder such laws, the licensee is entitled to use the copy of the software incorporated with this instrument as intended in the operation of the product in which it is embedded... he software may not be copied, decompiled, reverseengineered, disassembled, or otherwise reduced to human-perceivable form... his is not a sale of the software or any copy of the software; all right, title, and ownership of the software remain with Welch Allyn or its vendors... or information about any Welch Allyn product, call Welch Allyn Technical Support (http://www... lchallyn... m/ support) or visit www... lchallyn... m/en/about-us/locations... ml... 106090 (CD) DIR 80018998 Ver... AViTA Corporation 9F... No... 8, Sec... Kwang-Fu Rd... San-Chung District, 24158 New Taipei City, Taiwan This manual applies to Wellkang Ltd 29 Harley St... 1G 9QR London, U... 901094 Non Contact Thermometer

CareTemp Touch Free Directions for Use

LIMITED WARRANTY Thermo Menu Instrumentation purchased new from Welch Allyn is warranted to be free from defects in material and workmanship under normal use and service for a period of one year from the date of first shipment from Welch Allyn... his warranty shall be fulfilled by Welch Allyn or its authorized representative repairing or replacing at Welch Allyn's discretion, any such defect, free of charge for parts and labor... Model 650 Directions For Use Welch Allyn should be notified via telephone of any defective product and the item should be immediately returned, securely packaged and postage prepaid to Welch Allyn... oss or damage in shipment shall be at purchaser's risk... elch Allyn will not be responsible for loss associated with the use of any Welch Allyn product that (1) has had the serial number defaced, (2) has been repaired by anyone other than an authorized Welch Allyn Service Representative, (3) has been altered, or (4) has been used in a manner other than in accordance with instructions... HIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY IMPLIED WARRANTY OR MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR OTHER WARRANTY OF QUALITY, WHETHER EXPRESSED OR IMPLIED, WELCH ALLYN WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES... 7420 Carroll Road, San Diego, CA (619) 621-6600 or (800) 854-2904 70777-000C 1 1... robe storage channel 2... ormal/Monitor mode select switch 3... isplay 4... isplay indicators 5... robe 6... attery access screw 7... robe cover box holder/ battery access door 8... jection button 9... robe cord connector & receptacle 2 3 Note: Temperature measurement displays in this Directions For Use booklet are in °F... nternational units will display measurements in °C... 5... nsert the probe shaft into the probe storage channel (Fig... )... SETUP 1... npack the Welch Allyn Thermometer System... heck for any damage that may have occurred during shipping... elect the desired probe (oral probe - green body, rectal probe - red body)... nsert the probe cord connector into the probe receptacle... heck that the connection is secure... bserve the 7-second display test, ensuring that no display segments are missing (Fig... )... 6... emove the tab from a box of 25 Welch Allyn disposable probe covers and insert the box into the holder on the thermometer... PERATION 1... elect the temperature measurement mode (normal or monitor - Fig... )... ost temperatures are taken in the normal mode... ithdraw the probe from the storage channel and observe the display test... he unit will then display 84... F (28... C) with the low temperature arrow ON until the probe temperature rises above 84... F (28... C)...

Model 650 Directions for Use Rev C

Welch Allyn SureTemp and SureTemp Plus Thermometers Water Bath Use in the Verification of Calibration TO: Welch Allyn Thermometer Users & Biomedical Engineers FROM: Lari Shreffler Occasionally, Welch Allyn receives phone calls from SureTemp” and SureTemp” Plus customers questioning the proper method for verifying calibration of their thermometers... f these customers, many have indicated that they are trying to or would like to use a water bath test... t is IMPERATIVE to note that the SureTemp and SureTemp Plus thermometers can only be tested in monitor mode, when being tested in a water bath... here are a couple of reasons why the SureTemp and SureTemp Plus thermometers (as well as any other electronic thermometer that gives a reading in under 3-5 minutes) cannot be tested in their normal fast mode in a water bath... he thermometers are electronic predictive thermometers that utilize a software algorithm to “predict” what the patient’s temperature would have been after 3-5 minutes... ost electronic predictive thermometers also have a monitor mode, which allows the thermometer to be used in a fashion similar to traditional glass mercury thermometers, where the thermometer can be left in place for 3-5 minutes to allow it to come to thermal equilibrium (or for the probe and the mouth to come to the same temperature) and give the patient’s “true” temperature... water bath test does not have the same rate of heat transfer to the probe as does a human mouth and the thermal recovery times for water versus human tissue are different... robe contact with the heat source is more constant when fully submerged and surrounded by water than when placed in a mouth that has various anatomical structures that have different levels of blood perfusion and biological activity and, therefore different levels of heat emissions... s a person breathes and as blood is pumped through the body, the heat transfer is more pulsitile than in a water bath... o understand the differences between the human subject and a water bath, let’s look at the following example... ssumptions: Probe cover = room temperature (approximately 70 °F) Human mouth = 98 °F Water bath = 98 °F Human subject: Heat energy moves from the tissue of the mouth that is touching the probe cover (MT) into the probe cover to bring thermal equilibrium between the probe cover and the mouth tissue... he tissue temperature begins to go down while the probe cover temperature begins to rise... he body restores the tissue with heat energy at some rate (R1)... he ability of the tissue to heat up the probe cover depends on (R1) the rate that the body can restore heat energy into the tissue... ater bath: Heat energy moves from the water that is touching the probe cover (WT) into the probe cover to bring thermal equilibrium between the probe cover and the water... he water temperature (WT) begins to go down while the probe cover temperature begins to rise... he water bath restores the water (WT) with heat energy at some rate (R2)... he ability of the water (WT) to heat up the probe cover depends on (R2) the rate that the bath can restore heat energy into water (WT)... ummary: (R1) does not equal (R2) therefore the rate of thermal change, or the time to reach thermal equilibrium with the probe, is different for the bath and the mouth... his is the fundamental reason why Welch Allyn does not design their software by “training” thermometers in water baths... t is also why testing the thermometers in a water bath can only be done in monitor mode... n monitor mode, you are essentially allowing the thermometer the full time required (3-5 minutes) for the water bath and the probe to come to the same temperature... his is also why one should be suspicious of any predictive thermometer that gives good readings in the predictive mode in a water bath... hermometers that perform well in water baths do not usually perform well in human subjects... ater baths basically don’t reflect what actually occurs in the mouth... Proper method for testing calibration of the SureTemp and SureTemp Plus thermometers 1... erify electronic calibration by using a Welch Allyn Calibration Verification Key... he part number for the appropriate Calibration Verification Key is 06137-000 for the SureTemp M679/678 and 06138-000 for the SureTemp Plus M690/692... 2... erify the calibration of the probe by using a Welch Allyn Calibration Verification Test Device Model 9600 OR a stirred water bath... ith both devices, the calibration of the probe must be tested in MONITOR mode... his will verify that the thermistor in the probe has not fallen out of calibration... f using the Model 9600, refer to the Model 9600 Operator’s Manual for instructions on how to use... f using a stirred water bath, refer to the test protocol that follows... M678/679 SureTemp and M690/692 SureTemp Plus Thermometer Water Bath Test Protocol TEST OBJECTIVE: This test protocol is to help the customer to determine if M678/679 (SureTemp) and M690/692 thermometers have maintained their accuracy performance requirements by using the water bath technique... EST EQUIPMENT: * A Precision Thermometer (which is used to monitor water bath temperature)... Hart Scientific water bath (or equivalent) to be set at specified temperature (to be determined by customer)... Welch Allyn SureTemp Thermometer(s)... Welch Allyn Probe covers... Stop Watch... EST PROCEDURE: The following table details the different parameters to be utilized to determine the accuracy performance of the M678/679 in MONITOR MODE within the operating environment and the water bath temperature range... Environmental Temp... Water Bath Temp... Number of units Number of Temperatures 62 °F to 102 °F (Suggested temp: 70-75 °F) 94 °F to 108 °F TBD by customer TBD by customer Note: Water bath temperature to be monitored by a precision thermometer... llow water bath to stabilize for at least 30 minutes prior to testing...

SureTemp and SureTemp Plus Water Bath Use in the Verification of Calibration

Thermo Menu 600 Service Manual 670/675 Service Manual TABLE OF CONTENTS INTRODUCTION ... 2 SAFETY & WARNINGS ... SETUP ... 3 CHANGING PROBES ... OPERATION ... 4 TAKING ORAL TEMPERATURES ... TAKING RECTAL TEMPERATURES ... 8 TAKING AXILLARY TEMPERATURES ... 9 FEATURES ... 10 DISPLAY & ERROR INDICATORS ... 1 CLEANING AND STERILIZATION ... 3 BATTERY REPLACEMENT ... 13 CUSTOMER SERVICE ... 14 ACCESSORIES AVAILABLE ... 14 SPECIFICATIONS ... 4 LIMITED WARRANTY ... ACK COVER

SureTemp Model 670 and 675 Directions for Use Rev B

LIMITED WARRANTY 3-YEAR LIMITED WARRANTY ON NEW INSTRUMENTS: Instrumentation purchased new from Welch Allyn, Inc... Welch Allyn) is warranted to be free from original defects in material and workmanship under normal use and service for a period of three years from the date of first shipment from Welch Allyn... his warranty shall be fulfilled by Welch Allyn or its authorized representative repairing or replacing at Welch Allyn's discretion, any such defect, free of charge for parts and labor... SureTemp Thermometer Welch Allyn should be notified via telephone of any defective product and the item should be immediately returned, securely packaged and postage prepaid to Welch Allyn... oss or damage in shipment shall be at purchaser's risk... Model 678 Welch Allyn will not be responsible for loss associated with the use of any Welch Allyn product that (1) has had the serial number defaced, (2) has been repaired by anyone other than an authorized Welch Allyn Service Representative, (3) has been altered, or (4) has been used in a manner other than in accordance with instructions... -YEAR LIMITED WARRANTY ON PROBES AND PROBE COVERS: Welch Allyn warrants probe covers and probes to meet Welch Allyn’s specifications for the Product at the time of purchase and to be free from original defects in material and workmanship under normal use and service for a period equal to 1 year from the date of first shipment of such Product to the customer by or on behalf of Distributor... HIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR OTHER WARRANTY OF QUALITY, WHETHER EXPRESSED OR IMPLIED... ELCH ALLYN WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES... Operating Instruction Manual (800) 854-2904 • (858) 621-6600 • FAX (858) 621-6610 Welch Allyn, Inc... an Diego, CA 92121 0050 70873-0000D SPECIFICATIONS • Patient Temperature Range: 84... F - 108... F (28... C - 42... C)... Calibration Accuracy: +0... F (+0... C)... Dimensions (approximate): 2... in x 3 in x 7 in (5... cm x 7... cm x 17... cm); weight 10... oz (300 gr)... CUSTOMER SERVICE Thank you for purchasing the Welch Allyn Model 678 SureTemp® thermometer... he operating and maintenance instructions found in this manual should be followed to ensure years of accurate and reliable service... lease read these instructions thoroughly before using your 678 SureTemp® thermometer... For customer service, technical or clinical support, please contact Welch Allyn at (800) 854-2904 from 7:00 AM to 5:00 PM Pacific Time... Technical service manuals may be ordered by contacting Welch Allyn Customer Service at (800) 854-2904... The CE mark on this product indicates it has been tested to and conforms with the provisions noted within the 93/42/EEC Medical Device Directive... uropean Regulatory Manager, Medical Division Welch Allyn Ltd... Navan, Co... eath Republic of Ireland © 1997 by Welch Allyn, Inc... ll rights reserved... o part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, without prior consent in writing from Welch Allyn... rinted in the U... A... patent 5,632,555... Additional U... and foreign patents pending... 15

SureTemp Model 678 Operating Instruction Manual Rev D

Thermo Menu Service Manual SureTemp Thermometer Model 679 Operating Instruction Manual 0050 Thank you for purchasing the Welch Allyn Model 679 SureTemp® thermometer... he operating and maintenance instructions found in this manual should be followed to ensure years of accurate and reliable service... lease read these instructions thoroughly before using your 679 SureTemp® thermometer... echnical service manuals may be ordered by contacting Welch Allyn Customer Service at (800) 854-2904... The CE mark on this product indicates it has been tested to and conforms with the provisions noted within the 93/42/EEC Medical Device Directive... uropean Regulatory Manager, Medical Division Welch Allyn Ltd... Navan, Co... eath Republic of Ireland © 1997 by Welch Allyn, Inc... ll rights reserved... o part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, without prior consent in writing from Welch Allyn... rinted in the U... A... patent 5,632,555... dditional U... and foreign patents pending...

SureTemp Model 679 Operating Instruction Manual Rev D

Thermo Menu Service Manual

SureTemp Model 986 Operating Instruction Manual

Thermo Menu Operator Manual Service Manual SureTemp® Model 986 Thermometer Welch Allyn, Inc... 420 Carroll Road San Diego, CA 92121 70995-0000B Technical Manual M986 © 2001 © 2000, 2001 by Welch Allyn, Inc... ll rights reserved... o part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, without prior consent in writing from Welch Allyn, Inc... rinted in the USA Welch Allyn and SureTemp are trademarks of Welch Allyn, Inc... ll rights reserved...

SureTemp Model 986 Service Manual Rev B

Directions for use iii TABLE OF CONTENTS Conforms With... 1 Symbols and Descriptions... Safety and Warnings... 3 Introduction... 5 SureTemp Plus Model Comparison Chart... Indications/Contraindications... 6 Latex Statement... Parts and Features... Button Functions... Set-Up... Display Indicators... 10 Oral Temperature Measurement... Axillary Temperature Measurement... 3 Rectal Temperature Measurement... 14 Monitor Mode Temperature Measurement... 6 Instrument Security... 17 Maintenance... 8 Cleaning and Disinfection... 18 Disposal... Performance and Technical Specifications... 20 Guidence and Manufacturer’s Declaration... 21 EMC compliance... 1 Emissions and Immunity Information... 22 Replacement Parts and Accessories... 5 Accessories List... 6 SureTemp Plus Global Trade Item Numbers (GTIN)... 7 Service... 7 Welch Allyn Service Policy... 27 Contacting Welch Allyn... 28 Limited Warranty... 8 Service Centers...

SureTemp Plus 690 and 692 Series Directions for Use Ver A May 2018

To: European Distribution Channel FLC From: Thermomerty Category Date: June , 2018 Dear all, arround September/ October timeframe, the Welch Allyn SureTemp® Plus 690 and 692 Electronic Thermometers will ship with a refreshed cosmetic design... here will be no changes to the part numbers nor any changes in the accuracy and speed you’ve come to rely on... he changes to the product are as follows: Welch Allyn SureTemp® Plus 690 Electronic Thermometer • Updates to the color of the device face, buttons and hand grip Welch Allyn SureTemp® Plus 692 Electronic Thermometer • Updates to the color of the device face, buttons and hand grip • Bright LED back-lit screen • New ‘Monitor Mode’ button makes it easy to go directly into Monitor Mode Welch Allyn 4341 State Street Road Skaneateles Falls, NY 13153 USA welchallyn... m ©2018 Welch Allyn DIR 60086220 Ver A MC15186 Please Note: Welch Allyn will no longer provide the service replacement parts identified in Table 1 for the SureTemp Plus 690 and 692 Thermometers... he kits in Table 2 will continue to be available for sale... able 1 – Includes service parts that will no longer be for sale after the new version has launched Table 1: Discontinued Service Replacement Parts Part Number 25261-0000 25262-0000 25263-0000 25278-0000 71209-0000 71209-1000 71210-0000 716691 716692 Description Housing, Front, M690-692 Housing, Rear, M690-692 Housing, Battery Door, M690/692 Cover, Serial Port Label, Front, M690/Green Label, Front, M692/Blue Label, Icon ID, M690/692, English Switch Array, M690 Switch Array, M692 Table 2 - Includes the Probe Well and Probe Well Kits which will continue to be availble for sale... Table 2: Probe Well and Probe Well Kits - Available For Sale Part Number Description 01802-110 9600 Plus Calibration Tester 02891-000 Removable Probe Well (Blue) 02891-100 Removable Probe Well (Red) 02892-000 Probe and Well Kit (Incl... robe) 4' Rectal 02892-003 Probe and Well Kit, 4', Vet 02892-100 Probe and Well Kit (Incl... robe) 9' Rectal 02892-103 Probe and Well Kit, 9', Vet 02893-000 Probe and Well Kit (Incl... robe) 4' Oral 02893-100 Probe and Well Kit (Incl... robe) 9' Oral 53009-000 Batteries AA Alkaline 05031-101 Disposable Probe Covers - 1000/Case 71221-0000 Technical, Manual, M690/692 71213-0000 Operators Manual (DFU) For more information about the Welch Allyn SureTemp Plus 690 and 692 Electronic Thermometers, please visit www... lchallyn... m or contact the local Welch Allyn Sales Representative... Welch Allyn 4341 State Street Road Skaneateles Falls, NY 13153 USA welchallyn... m ©2018 Welch Allyn DIR 60086220 Ver A MC15186

SureTemp Plus 690 and 692 Series Part Number List Update June 2018

Table of Contents 1 General Information... 1 1... About this Manual... 1 1... Safety and Warnings... 1... Conforms with... 3 1... Symbols and descriptions... 3 2 Operating Characteristics... 6 2... Basic System Description... 6 2... Model Features... 8 2... Operating Features... 2... Instrument Security... 4 3 Preventive Maintenance... 17 3... Six-Month Maintenance... 7 3... Twelve-Month Maintenance... 17 3... Standard Storage... 3... Cleaning... 17 3... Replacing the Batteries... 8 3... Calibration Testing... 4 Troubleshooting... 21 4... Types of Errors... 1 4... Field Serviceable Repairs... 4... Field Serviceable Parts... 6 5 Theory of Operation... 28 5... Technical Overview... 8 Appendix A Specifications... A Appendix B Limited Warranty... B Appendix C Guidance and Manufacturer’s Declaration... C SureTemp® Plus Service Manual iii

SureTemp Plus 690 and 692 Series Service Manual Ver A May 2018

TABLE OF CONTENTS TABLE OF CONTENTS... LIST OF FIGURES ... ii WARRANTY ... v SPECIFICATIONS ... v TERMINOLOGY ... i 1... PERATIONAL CHARACTERISTICS... -1 Basic System Description ... 1-1 Self Tests ... 1-3 Instrument Reset/Self Tests ... 1-3 Display Test ... 1-3 Probe Warmer Circuit Self Tests... 1-4 Battery Life ... 1-4 Normal Mode... 1-5 Monitor Mode ... 1-6 Pulse Timer Mode (Model 678 only) ... -6 Backlight (Model 678 only) ... 1-6 F/C Conversion ... -7 Temperature Recall... -7 Biotech Mode ... 1-7 2... REVENTIVE MAINTENANCE ... 2-1 Cleaning and Sterilization ... 2-1 Routine Cleaning... 2-1 ETO Gas Sterilization Procedure... 2-1 Battery Removal and Replacement ... 2-2 3... ALIBRATION TESTING ... 3-1 Calibration Key Procedure... -1 Model 9600 Calibration Testing Procedure... 3-1 ® ® SureTemp Model 678/SureTemp Model 679 i

SureTemp Plus Model 678 and 679 Service Manual Rev A

Table of Contents SYMBOLS AND DESCRIPTIONS... -1 SAFETY AND WARNINGS... 1-2 INTRODUCTION... 1-4 SURETEMP PLUS MODEL COMPARISON CHART... 5 INDICATIONS/CONTRAINDICATIONS... 1-6 PARTS AND FEATURES... 1-6 BUTTON FUNCTIONS... 1-7 SET-UP... 1-7 DISPLAY INDICATORS... 1-9 ORAL TEMPERATURE MEASUREMENT... 1-12 AXILLARY TEMPERATURE MEASUREMENT... 1-14 RECTAL TEMPERATURE MEASUREMENT... -16 MONITOR MODE TEMPERATURE MEASUREMENT... 1-18 INSTRUMENT SECURITY... 1-20 MAINTENANCE... -21 CLEANING... 21 DISPOSAL... 22 PERFORMANCE AND TECHNICAL SPECIFICATIONS... -23 REPLACEMENT PARTS AND ACCESSORIES... 1-24 SERVICE... -24 LIMITED WARRANTY... 1-25 SERVICE CENTERS... -26

SureTemp Plus Model 690 and 692 series Directions for Use Ver E

ThermoScan Table of Contents CHAPTER 1 1... 1... 1... 1... 1... 1... 1... 1... INTRODUCTION ... -1 PRINCIPLE OF OPERATION ... 1-1 1... 1 Infrared Energy ... 1 1... 2 How the Pro 3000 Works ... 2 FEATURES ... -3 CONSTRUCTION ... 1-4 INFRARED TEMPERATURE REFERENCE... 1-4 SPECIFICATIONS ... -5 ACCESSORIES ... 1-6 CONTROLS AND DISPLAY ... -7 CHAPTER 2 2... 2... 2... 3... 3... 3... PREVENTIVE MAINTENANCE ... 1 INTRODUCTION ... -1 CLEANING ... 3-1 3... 1 Thermometer... -1 3... 2 Probe Window... 3-1 INSPECTION GUIDELINES FOR USERS ... -2 3... 1 Every Use ... 3-2 3... 2 Battery Change Message... 2 INSPECTION GUIDELINES FOR THE BIOMEDICAL DEPARTMENT ... -2 3... 1 Laboratory Accuracy ... -2 3... 2 Adjustment ... -3 SERVICE/TECHNICAL INQUIRIES (UNITED STATES AND CANADA) ... -3 CHAPTER 4 4... 4... FUNCTIONAL DESCRIPTION ... 2-1 INTRODUCTION ... -1 SENSOR UNIT ... 2-2 2... 1 Probe Cover ... 2-2 2... 2 Probe Window... 2-3 2... 3 Wave Guide (Barrel) ... -3 2... 4 Sensor Window... 3 2... 5 Infrared Sensor ... 3 2... 6 Ambient Temperature Sensor ... 2-3 ELECTRONIC CIRCUITS ... -4 2... 1 Power Supply ... 4 2... 2 Sensors ... 4 2... 3 Application Specific Integrated Circuit (ASIC)... 2-5 2... 4 Microcontroller... 2-6 2... 5 Non Volatile Memory... -7 2... 6 Switches... 2-7 CHAPTER 3 3... 3... GENERAL INFORMATION ... 1-1 TROUBLESHOOTING ... 4-1 INTRODUCTION ... -1 POSSIBLE MALFUNCTIONS ... 4-1 Pro 3000 Service Manual Braun ThermoScan iii

ThermoScan PRO 3000 Service Manual Rev A

BRAUN THERMOSCAN PRO 4000 ® CLEANING LENS WINDOW CLEANING BODY CLEANING GUIDE To clean the window, gently wipe its surface with a cotton swab or cloth slightly moistened with isopropyl alcohol and immediately wipe dry with a clean cotton swab or cloth... After cleaning, allow at least 5 minutes drying time before taking temperatures... ake sure the probe window is clean and dry prior to use... Avoid touching the window directly... f the window is damaged, return the thermometer to Welch Allyn for service... Note: DO NOT use any chemical other than alcohol to clean the probe lens window... What affects accuracy? • Use of cleaners other than isopropyl alcohol on lens area • Dirty lens results in lower readings • Fingerprints, cerumen, or dust on window (if placed in ear without probe cover, clean immediately) • Modification or adjustment of probe window • Reuse of a probe cover SM2943 Rev D For additional protection against fluid seepage and damage, attach a new probe cover prior to cleaning the body of the thermometer... To clean the probe wall, turn the device over... ith the display facing down, wipe the probe of the thermometer with a moist wipe... O NOT wipe the lens if not using an isopropyl alcohol wipe on the probe... To clean the body, ensure that the wipe is moist, not saturated... xcess fluid can seep through crevices and damage the unit... ipe the body with the display facing up... o not get liquid in the opening around the red pin... Braun ThermoScan probe covers are intended for single use only! To ensure accurate measurements, always use Braun ThermoScan disposable probe covers with the PRO 4000 thermometer... amaged, perforated, or soiled probe covers can lead to inaccurate temperature measurements... dditionally, the accuracy of your temperature measurement can be affected by damage to the probe window, or the presence of dirt or cerumen on the probe window...

ThermoScan PRO 4000 Cleaning Guide Rev D

Español Cómo utilizar Braun ThermoScan 1... se siempre un protector de sonda nuevo y limpio en cada medición para asegurar una lectura precisa... Français Mode opératoire du thermomètre Braun ThermoScan English How to use Braun ThermoScan 1... 1... Toujours mettre une nouvelle protection de sonde, propre, à chaque utilisation, pour garantir une lecture précise... To help to ensure accurate readings, make sure the probe tip and lens are clean and a new, clean probe cover is in place before each measurement... 5 Français 16 USA Español 28 Australia Canada China European Call Center France Germany Italy Japan Latin America Malaysia Netherlands Singapore South Africa Spain Sweden United Kingdom Ear thermometer 2... n el momento en que se coloca el protector de sonda, el termómetro se conecta automática-mente... spere a que aparezca la señal de operatividad... ThermoScan® 2... 2... Le thermomètre se met en marche automatiquement dès que l’on met en place la protection de sonde... ttendez le bip sonore indiquant que le thermomètre est prêt à l’emploi... When the probe cover is in place, the thermometer turns on automatically... ait for the ready signal beep... REF 04000-200 3... 3... 3... Introduzca la sonda en el canal auditivo tanto como sea posible y pulse el botón de inicio... Introduisez la sonde délicatement dans le conduit auditif et appuyez sur la touche de lecture... Fit the probe snuggly into the ear canal, then push and release the Start button... 4... 4... 4... Si la sonda se ha colocado correctamente en el canal auditivo, una señal acústica de larga duración confirma el final de la medición... n este momento puede estar seguro de que ha medido su temperatura con precisión... l resultado aparece en la pantalla... Si la sonde a été correctement placée dans le conduit auditif pour la durée nécessaire à la mesure, un bip sonore long confirme la fin de la mesure... otre température a alors été mesurée précisément... e résultat apparaît sur l’afficheur... If the probe has been fitted correctly into the ear canal during the complete measuring process, a long beep will signal the end of the measuring process... ou can be assured to have taken an accurate temperature reading... he thermometer detects that an accurate temperature measurement has been taken... Si la medición se realiza en otra persona, se puede utilizar la luz «ExacTemp»... a luz parpadea si la sonda se ha introducido de forma adecuada durante el proceso de medición y permanece encendida si se ha realizado la medición correctamente... Le témoin « ExacTemp » est destiné à la prise de température d’une autre personne... e témoin clignote si la sonde est positionnée correctement pendant la mesure et s’allume si la mesure est correcte... Distributed by Welch Allyn, Inc... 341 State Street Road, Skaneateles Falls, NY 13153 USA www... lchallyn... m In Canada Imported by Welch Allyn Canada Ltd... 60 Matheson Blvd... ast, Unit 2 Mississauga, Ontario L4Z 1V4 Canada Kaz USA, Inc... 297 250 Turnpike Road Southborough, MA 01772, USA This product is manufactured by Kaz USA, Inc... nder license to the ‘Braun’ trademark... Braun’ is a registered trademark of Braun GmbH, Kronberg, Germany... hermoScan is a registered trademark of Kaz USA, Inc... If you take the temperature of another person, the «ExacTemp» light can be of help... t flashes during the measuring process as long as the probe is correctly positioned, and lights up continuously when the thermometer detects that an accurate reading has been taken... ©2011 Kaz USA, Inc... 40 06... English/French/Spanish PRO 4000 Welch Allyn Technical Support: English +1 800 535 6663 or +1 315 685 4560 +61 2 9638 3000 +1 800 561 8797 +86 21 6327 9631 +353 46 90 67790 +33 155 69 58 49 +49 695 098 5132 +39 026 968 2425 +81 42 703 6084 +1 305 669 9003 +603 7875 3341 +31 202 061 360 +65 6419 8100 +27 11 777 7555 +34 917 499 357 +46 85 853 6551 +44 207 365 6780 www... lchallyn... m/support Use only Braun certified probe covers for accurate readings Replacement parts list Product description 7 US/Canada 04000-200 Braun ThermoScan® PRO 4000 ear thermometer 04000-300 Braun ThermoScan PRO 4000 ear thermometer, with security base station* 04000-400 Braun ThermoScan PRO 4000 ear thermometer, roll stand p mp 1 Thermometers xacxTaecmTe start 8 EMEA 04000-600 Braun ThermoScan PRO 4000 ear thermometer 04000-500 Braun ThermoScan PRO 4000 ear thermometer, with security base station Asia Pacific/Latin America 04000-200 Braun ThermoScan PRO 4000 ear thermometer UK 04000-600 Braun ThermoScan PRO 4000 ear thermometer 2 Body temperature Français Normal body temperature is a range... he following table shows that ranges of normal also vary by site... herefore, readings from different sites, even if taken at the same time, should not be directly com-pared... Axillary1: 94... F – 99... F Oral1: 95... F – 99... F 35... C – 37... C Rectal1: 97... F – 100... F 36... C – 38... C ThermoScan2: 96... F – 100... F 35... C – 38... C US/Canada 05075-800 Braun ThermoScan disposable probe covers (case of 800 probe covers) 05075-005 Braun ThermoScan disposable probe covers (case of 5,000 probe covers) 24001-1000 PRO 4000 base station and probe cover refill dispenser* 24001-0000 PRO 4000 base station with rolling stand* 53020-0000 Rechargeable battery pack for PRO 4000 80199-0000 Replacement power cord for PRO 4000 base station (North America) 01802-110 Welch Allyn/Braun 9600 plus calibration tester 4 EMEA 04000-800 Braun ThermoScan disposable probe covers (case of 800 probe covers) 04000-700 PRO 4000 base station and probe cover refill dispenser 53020-0000 Rechargeable battery pack for PRO 4000 80199-0001 Replacement power cord for PRO 4000 base station (MultiNational) 01802-110 Welch Allyn/Braun 9600 plus calibration tester 9 6 b Asia Pacific/Latin America 05075-800 Braun ThermoScan disposable probe covers (case of 800 probe covers) 05075-005 Braun ThermoScan disposable probe covers (case of 5,000 probe covers) 01802-110 Welch Allyn/Braun 9600 plus calibration tester UK 04000-800 Braun ThermoScan disposable probe covers (case of 800 probe covers) 01802-110 Welch Allyn/Braun 9600 plus calibration tester Español Température du corps La température normale du corps correspond à une fourchette de valeurs... e tableau ci-dessous indique que cette fourchette varie en fonction de la partie du corps où la température est prise... ’est pourquoi il ne faut pas établir de comparaison directe entre les températures prises en des endroits différents même si elles sont prises au même moment... La temperatura corporal La temperatura normal del cuerpo se refleja en un rango de temperatura... a siguiente tabla muestra que este rango normal de temperatura también varía según la parte del cuerpo... n consecuencia, las mediciones en diferentes partes, incluso si son tomadas al mismo tiempo, no deben compararse directamente... 34... C – 37... C Accessories and probe covers 3 5 English Température axillaire1: 94,5°F – 99,1°F 34,7°C – 37,3°C Axilar1: 94,5°F – 99,1°F 34,7°C – 37,3°C Température orale1: 95,9°F – 99,5°F 35,5°C – 37,5°C Oral1: 95,9°F – 99,5°F 35,5°C – 37,5°C Température rectale1: 97,9°F – 100,4°F 36,6°C – 38,0°C Rectal1: 97,9°F – 100,4°F 36,6°C – 38,0°C ThermoScan2: 96,4°F – 100,4°F 35,8°C – 38,0°C ThermoScan2: 96,4°F – 100,4°F 35,8°C – 38,0°C A person’s normal temperature range tends to decrease with age... he following table shows normal ThermoScan ranges by age... a fourchette normale de température d’un individu tend également à décroître avec l’âge... e tableau suivant indique les fourchettes nor-males de température avec ThermoScan en fonction de l’âge... Normal ThermoScan temperature ranges2: 0 – 2 years 97... F – 100... F 36... C – 38... C 3 – 10 years 97... F – 100... F 36... C – 37... C 11 – 65 years 96... F – 99... F 35... C – 37... C > 65 years 96... F – 99... F 35... C – 37... C The range of normal varies from person to person and can be influenced by many factors such as time of day, level of activity, medications and gender... Fourchettes normales par âge avec ThermoScan2: Rangos normales ThermoScan según la edad2: 0 – 2 años 97,5°F – 100,4°F 36,4°C – 38,0°C 0 – 2 ans 97,5°F – 100,4°F 36,4°C – 38,0°C 3 – 10 años 97,0°F – 100,0°F 36,1°C – 37,8°C 3 – 10 ans 97,0°F – 100,0°F 36,1°C – 37,8°C 11 – 65 años 96,6°F – 99,7°F 35,9°C – 37,6°C 11 – 65 ans 96,6°F – 99,7°F 35,9°C – 37,6°C > 65 años 96,4°F – 99,5°F 35,8°C – 37,5°C > 65 ans 96,4°F – 99,5°F 35,8°C – 37,5°C La fourchette des températures normales varie d’une personne à l’autre et peut être influencée par de nombreux facteurs tels qu’un moment précis de la journée, le type d’activité, la prise de médica-ments et le sexe de l’individu... * Available in the US only Igualmente, el rango normal de temperatura de una persona tiende a decrecer con la edad... a siguiente tabla muestra los rangos normales ThermoScan para cada edad... El rango de temperatura normal varía de una persona a otra, y puede estar influido por muchos factores como el momento del día, el nivel de actividad, la medicación y el sexo... Patent numbers a p start ExacTem 10 US AU CH CN DE ES FR GB HK JP KR NL TR TW 6,022,140; 6,149,298; 6,203,194; 6,626,835; 6,694,174; 7,014,358; D460,006 2002250974 0 966 660; 1 664 693 ZL96198273... ZL99803219... ZL00804341... ZL00124323... ZL01337258... ZL02805125... 40101997; 50011321; 50015741; 59811385; 502004007077 0 966 660; 1 664 693 0 966 660; 1 081 475; 1 166 067; 1 664 693 0 966 660; 1 081 475; 1 166 067; 1 664 693; 2 104 340 1024053; 1042550; 1062043 4052945; 1144805 10-0626189; 10-0628283; 10-0883150; 10-0507716 1 166 067; 1 664 693 1 664 693 NI-112501; NI-147458; NI-159809; ND-084456; 1... hamberlain, J... , Terndrup, T... , New Light on Ear Thermometer Readings, Contemporary Pediatrics, March 1994... hamberlain, J... , et al... Determination of Normal Ear Temperature with an Infrared Emission Detection Thermometer, Annals of Emergency Medicine, January 1995... 1... hamberlain, J... , Terndrup, T... , New Light on Ear Thermometer Readings, Contemporary Pediatrics, March 1994... hamberlain, J... , et al... Determination of Normal Ear Temperature with an Infrared Emission Detection Thermometer, Annals of Emergency Medicine, January 1995... 1... hamberlain, J... , Terndrup, T... , New Light on Ear Thermometer Readings, Contemporary Pediatrics, March 1994... hamberlain, J... , et al... Determination of Normal Ear Temperature with an Infrared Emission Detection Thermometer, Annals of Emergency Medicine, January 1995...

ThermoScan PRO 4000 Directions for Use June 2011

Ear Temperatures with the Braun ThermoScan PRO 4000 ® 1... emove the thermometer from the case and attach a probe cover... he device will turn on... ait for the “ready” beep and place the probe snugly into the ear canal; correct probe placement is essential for accurate readings... ress and release the Start button... he thermometer will beep once... he green ExacTemp™ light above the Start button will flash, indicating stable probe placement... long beep and a solid green ExacTemp light will signal the end of the measurement... f the probe is not placed in a stable position while taking a temperature, the device beeps, the green ExacTemp light goes out and POS (Position Error) will display... Ear Canal 98... 94... Probe Tip C10126_BraunTipsCard... dd 1 97... 99... 6... ress the button to recall the last temperature... o change default temperature scale: With the device off, press and hold the button for about 5 seconds... elease the button when desired scale is shown... Tympanic Membrane ©2002 Welch Allyn, Inc... ll rights reserved 1/6/13 9:05 P Tips for Taking Ear Temperatures with the Braun ThermoScan PRO 4000 ® 1... lways apply a probe cover... f the device is placed in the ear canal without a probe cover, the lens must be cleaned before the next use... lean the lens with an alcohol swab and allow five minutes for complete drying... se only Braun ThermoScan probe covers... he following will interfere with accurate temperature readings: > Poor probe placement > Ambient temperature > Dirty, wet or damaged probe lens > Lying on pillow > No or used probe cover > Hearing aid 5... he following will not interfere with accurate temperature readings: > Cerumen (ear wax) > Otitis Media (ear infection) > Tympanostomy tubes CUSTOMER SERVICE For technical or clinical support, please contact Welch Allyn at 800... 5... 63... ww... lchallyn... m © 2013 Welch Allyn SM2678 Rev F C10126_BraunTipsCard... dd 2 1/6/13 9:05 P

ThermoScan PRO 4000 Quick Reference Guide Rev F

Welch Allyn Service Documentation Part Number: 701627 Rev... This documentation provides only technical information - technical data, calibration instruction, general information and regulations for medical products... he function of the thermometer is described in the Operating Instructions, Welch Allyn P/N 701622 Technical data: Display: LCD-Display... Display resolution: 0... °C / °F... Displayed temperature range: 20... °C - 42... °C (68... °F - 108... °F)... Work place temperature range: 10... °C - 40... °C (50... °F - 104... °F)... Work place humidity: up to 95 %... In the range between: the accuracy of allowable tolerance with probe cover is: 35... °C - 42... °C (95... °F - 107... °F)... 0... °C (± 0... °F)... Outside the range from: the accuracy of allowable tolerance with probe cover is: 35... °C - 42... °C (95... °F - 107... °F)... 0... °C Probe tip: heated up to approximately 37°C... Power supply: rechargeable Braun battery-pack with base-station and smart plug or 2 1... V type AA (LR 6) batteries... Smart plug: 100-240 V - input / 12 V – output... Base-station: 12 V - input / approx... V – output... Battery-life time: 3 month (with *) / 1000 measurements... Rechargeable battery lifetime: 3 month / 500 measurements per charge... Rechargeable battery charging: Thermometer stored in basis-station... (± 0... °F)... Rechargeable battery charging time: 14 hours... Welch Allyn Base-station function indications: 1 LED, green for power connection 1 LED, yellow for charging indication... Electronic anti-theft *: for Pro 4000 appliances only and with the base-station in use... Automatic turn off: If no button is pressed within 60 seconds, the appliance will turn off automatically... Manual turn off: Push - button for >3 seconds... 701627 REV... Page 1 of 9 Service Documentation Welch Allyn Part Number: 701627 Rev... General hints Production code Near the battery storage LOT 4042... = Year / 042 = Day... Attention: Do not dispose of empty batteries or defective rechargeable batteries in household waste... isposal can take place at appropriate collection sites provided in your country Hint: Type BF equipment This appliance conforms to the following standards: DIN EN 60601-1 <<Medical electrical equipment>>-Part 1: General requirements for safety... This product conforms to the provisions of the EC directive 93/42/EEC (Medical Device Directive)... Hint: 0297 Labour Group: Welch Allyn 03 701627 REV... Page 2 of 9

ThermoScan PRO 4000 Service Documentation 701627 Rev G

Welch Allyn Braun ThermoScan® PRO 4000 Thermometer Thermometer and Dock Cleaning Instructions DATE: December 12, 2011 RE: Braun ThermoScan® PRO 4000 thermometer and dock cleaning instructions FROM: Howard Higgins, Global Category Manager 1... elch Allyn recommended cleaning and disinfecting options for the Braun ThermoScan® PRO 4000 Ear Thermometer... For the speculum tip, clean with 70% or stronger isopropyl alcohol only, using a Q-tip or equivalent... o clean the window, gently wipe its surface with a cotton swab slightly moistened with alcohol and immediately wipe dry with a clean cotton swab... fter cleaning, allow at least 5 minutes drying time before taking temperatures... void touching the window except when cleaning is required... ote: Do not use any chemical other than alcohol to clean the probe window... For the remaining surfaces, use a soft cloth slightly moistened with isopropyl alcohol, 10% chlorine bleach, or standard hospital disinfectants such as CaviCide®... isinfectants should be applied to the cloth to wipe down the unit, wringing out any excess moisture so that the cloth does not drip into the unit... isinfectants should never be sprayed directly on the device... 2... nstructions for cleaning electrical contacts of the Braun ThermoScan® PRO 4000 to improve the charging and communication performance between the thermometer and charging dock: The charging dock, rechargeable battery and thermometer electrical contacts need to be cleaned regularly... his should be done every 3 months or any time the charging or communication performance between the thermometer and dock becomes erratic... or example, if the Braun thermometer fails to transfer a reading or exhibits incomplete charging, the contacts should be inspected and cleaned as instructed in this document... ote that the electrical contacts may not look dirty, but still can have contamination that will prevent the device from working correctly... All of the contacts should be cleaned using a cotton swab slightly dampened with isopropyl alcohol... 1) Clean the two contacts on the end of the thermometer: Braun external contact view... ) Remove the battery pack... lean the two battery contacts (springs) inside the thermometer: Braun internal battery contact view...

ThermoScan PRO 4000 Thermometer and Dock Cleaning Instructions Dec 2011

ThermoScan PRO 6000 Cleaning and Maintenance Guide Rev A

Ear thermometer Directions for use PRO 6000 English 901083 Distributed by: Welch Allyn, Inc... 341 State Street Road, P... Box 220 Skaneateles Falls, NY 13153 USA Imported by: Welch Allyn Canada Ltd... 60 Matheson Blvd... ast, Unit 2 Mississauga, Ontario L4Z 1V4 Canada Kaz USA, Inc... 50 Turnpike Rd... outhborough, MA 01772, USA Kaz Europe Sàrl Place Chauderon 18 CH‑1003 Lausanne – Switzerland For information about any Welch Allyn product, contact: Welch Allyn Technical Support: www... lchallyn... m/support visit locations: www... lchallyn... m/about/company/locations... m Replacement parts For a complete list of parts, go to www... lchallyn... m Patent numbers www... lchallyn... m/patents www... z... m/patents/braun © 2015 Kaz USA, Inc... ade in Mexico Use only Braun certified probe covers for accurate readings From This product is manufactured by Kaz USA, Inc... nder license to the ‘Braun’ trademark... Braun’ is a registered trademark of Braun GmbH, Kronberg, Germany... hermoScan is a registered trademark of Helen of Troy Limited... 1IMP6NP190 13APR15 1

ThermoScan PRO 6000 Directions for Use April 2015

ThermoScan ® Ear thermometer Directions for use PRO 6000 English ThermoScan ® PRO6000 REF 901083 Product/sales literature or label Distributed by: Welch Allyn, Inc... 341 State Street Road, P... Box 220 Skaneateles Falls, NY 13153 USA Imported by: Welch Allyn Canada Ltd... 60 Matheson Blvd... ast, Unit 2 Mississauga, Ontario L4Z 1V4 Canada Kaz USA, Inc... 50 Turnpike Rd... outhborough, MA 01772, USA Kaz Europe Sàrl Place Chauderon 18 CH-1003 Lausanne - Switzerland For information about any Welch Allyn product, contact Welch Allyn Technical Support: www... lchallyn... m/support visit locations: www... lchallyn... m/about/company/locations... m Replacement parts For a complete list of parts, go to www... lchallyn... m Patent numbers www... lchallyn... m/patents www... z... m/patents/braun Use only Braun certified probe covers for accurate readings © 2015 Kaz USA, Inc... ade in Mexico This product is manufactured by Kaz USA, Inc... nder license to the ‘Braun’ trademark... Braun’ is a registered trademark of Braun GmbH, Kronberg, Germany... hermoScan is a registered trademark of Helen of Troy Limited... 1IMP6NA190 03JUN15

ThermoScan PRO 6000 Directions for Use June 2015

Ear Thermometer Directions for use PRO 6000 English 901083 Distributed by: Welch Allyn, Inc... 341 State Street Road, P... Box 220 Skaneateles Falls, NY 13153 USA Imported by: Welch Allyn Canada Ltd... 60 Matheson Blvd... ast, Unit 2 Mississauga, Ontario L4Z 1V4 Canada Kaz USA, Inc... 50 Turnpike Rd... outhborough, MA 01772, USA Kaz Europe Sàrl Place Chauderon 18 CH‑1003 Lausanne – Switzerland For information about any Welch Allyn product, contact: Welch Allyn Technical Support: www... lchallyn... m/support visit locations: www... lchallyn... m/about/company/locations... m Replacement parts For a complete list of parts, go to www... lchallyn... m Patent numbers www... lchallyn... m/patents www... z... m/patents/braun © 2014 Kaz USA, Inc... ade in Mexico Use only Braun certified probe covers for accurate readings From This product is manufactured by Kaz USA, Inc... nder license to the ‘Braun’ trademark... Braun’ is a registered trademark of Braun GmbH, Kronberg, Germany... hermoScan is a registered trademark of Helen of Troy Limited... 1IMPR6E190 04SEP14 1

ThermoScan PRO 6000 Directions for Use Sept 2014

Table of Contents 1... 0... 1... 2... 3... 4... 5... 6... Overview Cleaning the Probe Tip Cleaning the Body and Accessories Approved Cleaning Solutions Probe Covers Taking a Temperature Interferences Contraindications Memory and Temperature Scale Manual Timer Error Messages and Solutions Batteries Cradles and Charging Station Security Security Function Resources

ThermoScan PRO 6000 Inservice Presentation

ThermoScan® PRO 6000 ® Quick Reference Guide Welch Allyn Technical Support (www... lchallyn... m/support) REF 901083 visit locations (www... lchallyn... m/about/company/locations... m) Operation and technique 1 1a 1b Additional functions Remove thermometer from cradle by gripping thermometer at base and pivoting up... hermometer will turn on automatically... robe cover icon will flash on display indicating a new probe cover is needed... 2 Attach a new probe cover by pushing probe tip straight into box, then pulling thermometer out... 3 Wait for the ready indication... ing around MEASURE button turns green, thermometer will beep once and three lines on display indicate thermometer is ready... 4 Place probe snugly in ear canal and direct toward opposite temple... eep thermometer probe steady in the ear canal... orrect probe placement is essential for accurate measurements... 5 Press and release MEASURE button... he thermometer will beep once, running dashes will appear on the display then the green ExacTemp light will flash, indicating consistent probe position... 6 Temperature measurement... long beep and steady green ExacTemp light will signal the end of the measuring process... he temperature will show on the display... 7 Remove used probe cover by pressing Probe Cover Ejector buttonTo achieve accurate measurements, use a new, clean probe cover for each measurement... o take another measurement, place a new, clean probe cover on the thermometer... * * C/F C/F Mem Mem Memory Press the MEMORY button to reveal the last completed temperature... Temperature conversion Press and release C/ F button to view the measurement in the alternate temperature scale temporarily... ress button again to return to default temperature scale... efault temperature scale can be set with the C/F switch located inside the battery compartment... * Manual timer Press and hold button for one second to activate timer... beep is heard at the initiation of the timer... irst segment will flash until first 15 seconds are complete and then beep... Repeats for 3 remaining segments... At 60 seconds a long beep will sound... he thermometer will exit timer mode 5 seconds after last segment... ou can exit timer anytime by pressing * button again... Security and charging To UNLOCK, thermometer must be returned to charging station or compatible vital signs device... UNLOCK icon displays when Security mode is active and counts remaining time available (if under 60 minutes) before thermometer is locked... hen time runs out LOCK icon remains on display... Charge light indicator Illuminates indicating rechargeable battery is charging... ndicator changes from amber to green when battery is fully charged... Errors and notifications Error Message What affects accuracy External factors may influence ear temperatures, including: Situation Solution No probe cover is attached (animates ON)... Attach new, clean probe cover... Factor Affected Not affected Used probe cover Ambient temperature Wet / dirty / damaged lens Used probe cover is attached (animates OFF)... Hearing aid Discard probe cover that is on and attach new, clean probe cover if taking another temperature measurement... Lying on pillow Moderate cerumen (ear wax) Otitis media (ear infections) (POS = position error) The infrared monitor cannot find a temperature equilibrium and allows no measurement... Change the probe cover to reset... estrict patient movement and ensure that the positioning of the probe is correct and remains stable while taking new temperature... Ambient temperature is not within the allowed operating range (50 – 104 °F or 10 – 40 °C) or changing too rapidly... Tympanostomy tubes Note: If lens is dirty or inserted into ear canal without probe cover refer to maintenance and service section in directions for use... nly clean as specified by manufacturer... Replacing the batteries Wait 20 sec... ntil thermometer turns off automatically, then turn on again... nsure thermometer and patient are in an environment for 30 minutes where the temperature is between 50 ºF and 104 ºF or 10 ºC and 40 ºC... Temperature taken is not within typical human temperature range... I will be displayed when temperature is higher than 108 °F (42... °C)... Change 2 AA alkaline batteries when begins to flash on the display... pen battery door Open battery door by sliding spring latch to the right using your finger or a pointed object such as a pen... hile holding the latch in the open postion, grasp the battery door and remove it Change probe cover to reset... hen, make sure thermometer is properly inserted and take a new temperature... LO will be displayed when temperature is lower than 68 °F (20 °C)... Remove the 2 AA alkaline batteries and replace with 2 new AA alkaline batteries, making sure the poles are in the right direction... System error (All icons display or display is blank) Wait 20 seconds until the thermometer turns off automatically, then turn on again... If error persists, … reset the thermometer by removing the batteries and putting them back in... or Snap battery door back into place and ensure the latch returns to original latch position... ® oScan Therm 2... Rechargeable battery pack Insert rechargeable battery pack into battery compartment with battery label facing outward... mAh 750 # 894 104 000 901 REF 14 0 09 A RBTP0 CHIN 30LBP E IN H Ni-M MAD LOT If error still persists, … batteries are dead... nsert new batteries... If error still persists, … contact local Welch Allyn Service Center or representative Battery is low, but thermometer will still operate correctly... Insert new batteries... Battery is too low to allow temperature measurement... Insert new batteries... BF APPLIED PART Compliant CAUTION W E L C H A L LY N A U S T R A L I A P T Y LT D UNIT 5 38 SOUTH STREET R Y D A L M E R E , N S W 2 116 AUSTRALIA Kaz Symbol for ROHS compliance © 2014 Kaz USA, Inc... his product is manufactured by Kaz USA, Inc... nder license to the ‘Braun’ trademark... Braun’ is a registered trademark of Braun GmbH, Kronberg, Germany... hermoScan is a registered trademark of Helen of Troy Limited and its affiliates... ® Distributed By: Welch Allyn, Inc... 341 State Street Road, P... Box 220 Skaneateles Falls, NY 13153 USA Imported By: Welch Allyn Canada Ltd 160 Matheson Blvd, East, Unit 2 Mississauga, Ontario L4Z 1V4 Canada Kaz USA, Inc... 297 250 Turnpike Rd... outhborough, MA 01772 USA EC|REP Kaz Europe Sàrl Place Chauderon 18 CH-1003 Lausanne, Switzerland Made in Mexico Small Rev A 09JUL14 31IMPRQE190

ThermoScan PRO 6000 Quick Reference Guide July 2014

PRO 6000 Ear thermometer Service documentation This product is manufactured by Kaz USA, Inc... nder license to the ‘Braun’ trademark... Braun’ is a registered trademark of Braun GmbH, Kronberg, Germany... hermoScan is a registered trademark of Helen of Troy Limited and its affiliates... 1IMP6SM190 REV8 16JUN15 PRO 6000 1... Scope The purpose of this document is to provide the necessary information to check the accuracy of the PRO 6000 ear thermometer... he document will be used to standardize the procedure of checking the thermometer accuracy... 2... General information The Braun ThermoScan® thermometer is a clinical grade ear thermometer indicated for the intermittent measurement of human body temperature in patients of all ages in a professional use environment... 2... Technical specifications Displayed temperature range: 20-42... C (68-108°F) Operating ambient temperature range: 10-40°C (50-104°F) Display resolution: 0... C or °F Accuracy for displayed temperature range: With probe cover: ±0... C (±0... F) (35... 42°C) (95-107... F) ±0... C (±0... F) (outside this temperature range) Without probe cover: ±0... C (35... 42°C) ±0... C (outside this temperature range) Clinical repeatability: <0... C (0... °F) Warm up time: initial start-up time: 3-4 seconds Measurement time: 2-3 seconds Automatic power down 10 seconds Battery life 6 months/1000 measurements Battery type 2*MN 1500 or 1... AA (LR6) Thermometer dimension 6”x1... x1... (152mm x 44mm x 33mm) Thermometer weight 3... oz (100g) without batteries Long term storage ranges Storage temperature -25-55°C (-13-131°F) Storage humidity 15-95% RH non-condensing Shock withstands drops of 1 meter (3 feet) Pressure 700-1060hPA (0... 1... atm) The thermometer is specified to operate at 0... 1... atmospheric pressure... 1

ThermoScan PRO 6000 Service Documentation Rev 8 June 2015

Recalls and alerts

ThermoScan PRO 4000 Obsolescence Notice May 2016

ThermoScan PRO 4000 Obsolescence Notice May 2016