3M Ranger Model 145 Maintenance Guide Sept 2016

Maintenance Guide

12 Pages

3M™ Ranger™ Pressure Infusor Model 145 Maintenance Guide  3M™ Ranger™ Blood/Fluid Warming Systems  Preventative Maintenance ...1 Inspection Checklist ...5 Replacement Instructions ...6 Guidance and Manufacturer’s Declaration - Electromagnetic Emissions ...8  About this Maintenance Guide This maintenance guide describes the maintenance of the 3M™ Ranger™ pressure infusor. This maintenance guide and the Ranger pressure infusor are to be used only by individuals trained in the healthcare and biomedical professions. Read and follow all instructions, labeling, and accompanying documents supplied with this medical device. Failure to follow instructions could lead to misuse of the device or device malfunction.  Preventative Maintenance Visual inspection Carefully inspect the Ranger pressure infusor for signs of damage. For a list of recommended inspections and instructions see the “Inspection Checklist” on page 5.  Cleaning the Ranger pressure infusor Service frequency Clean the Ranger pressure infusor unit on an as-needed basis or according to institutional protocol. NOTICE: • Do not immerse the pressure infusor or use a dripping wet cloth for cleaning. Moisture may seep inside the device and damage the electrical components. Clean the pressure infusor exterior with a soft cloth using plain water or a mild, all-purpose or nonabrasive cleaner. • Do not spray cleaning solutions on to the pressure infusor. Damage to the pressure infusor may occur.  Cleaning the Ranger pressure infusor and cord Clean the Ranger pressure infusor on an as-needed basis or per facility policies and procedures for cleaning electronic equipment. 1. Disconnect power supply from power outlet. 2. Use a slightly damp soft cloth moistened with a mild, nonabrasive cleaning solution or disinfectant to clean the device surfaces and cord. Avoid getting liquid into electronic ports. 3. Dry with a separate soft cloth.  1  4431667 Description: 3M TM IPD PW MD145 Maintenance Guide Manual  Supersedes#:XX-XXXX-XXXX-X  Base File Name: PA: 34871924741.indd GA: Software: InDesign CS6 SGS Contact: Email: Printer: Printer Location: Supplier:  PROCESS BLACK  PROCESS CYAN  PROCESS MAGENTA  Structure#:XX-XXXXX  09.12.16 PU 34871535430 and make changes per annotated PDF.  TN  09.19.16 Changes per RA proof report.  TN  09.20.16 Final release.  DJ  Cat/Product#:XXXX Reference: MD145 Requester: Debra Staack Die # / Doc. Size: 8.5" x 11"  PROCESS YELLOW  3  Item Spec#: 34-8719-2474-1  PANTONE 5265  SILVER  PDF SCALED TO 70%  DIELINE
File Type: PDF
File Size: 390 KB
File Name: 3m_ranger_model_145_maintenance_guide_sept_2016.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions