Alaris System Cleaning Product Guidelines Sw V2 May 2015

Cleaning Product Guidelines

1 Page

Cleaning product guidelines Alaris® System Your Alaris System PC unit and modules require proper care and maintenance to remain in good repair. To ensure that your devices continuously work well, use the recommended cleaning products and correct cleaning and inspection processes. Refer to the applicable Alaris System Directions for Use for detailed cleaning instructions.  IUI Connectors  CareFusion has determined these products safe for Alaris System cleaning: •  10% bleach - (sodium hypochlorite, 1-part bleach to 9-parts water)  •  70% isopropyl alcohol (IPA)  •  3M Compublend II cleaning concentrate - Base V, with fragrance - (3.74g/Litre water)  •  Brulin Maxima 128™ disinfectant cleaner (7.48g/Litre water)  Inter-unit interface (IUI) connectors are the black connection points on the sides of each module. DO NOT expose them to any of the cleaning solutions on the list other than 70% IPA.  IUI Connectors  ®  •  Clorox Healthcare Bleach Germicidal Cleaner (formerly marketed as Dispatch Hospital cleaner disinfectant)  •  Dispatch Hospital Cleaner Disinfectant Towels with Bleach  •  Ecolab Asepti-Zyme instrument presoak and detergent - (7.48g/Litre water)  •  LpH se concentrated germicidal detergent (3.74g/Litre water)  ®  DO NOT use the following chemicals that can damage the surfaces of the instrument: •  Acetone  •  Ammonia  •  Metrex Metrizyme dual-enzymatic cleaner (7.48g/Litre water)  •  Aromatic solvents (such as naphtha, paint thinner, benzene, Toluene, xylene)  •  PDI Super Sani-Cloth germicidal disposable wipes  •  Chlorhexidine gluconate  •  •  Phenolic 256 DC germicidal detergent – (3.74g/Litre water)  Chlorinated solvents (such as trichloroethane)  •  •  Staph Attack disinfectant fungicide and virucide  •  Virkon S disinfectant and virucide - (9.6g/Litre water)  Diethyleneglycol monobutyl ether or Ethylene glycol monobutyl or ether or 2-butoxyethanol or Butyl Cellosolve o r Methyl ethyl ketone  Wexford Labs ready-to-use (RTU) Wex-Cide germicidal detergent  •  Non-healthcare grade solvents solutions  •  •  Quaternary ammonium chloride-based compounds (such as Dipropylene glycol n-propyl ether N-Alkyl [C12-18)] Dimethyl benzyl ammonium chloride, N-Alkyl [C1214] Dimethyl ethylbenzyl ammonium chloride)  •  Solutions containing phosphoric acid (such as Foamy Q&A®)  •  Undiluted alcohol  •  Wexford Labs RTU Thymo-Cide germicidal detergent  •  Wexford Labs Wex-Cide 128 concentrate germicidal detergent - (7.48g/Litre water) Note: Water and mild detergents may also be used. Note: The recommended list represents worldwide brands current at the time of print. The product warranty will be honoured so long as the cleaning solution used is not from the ‘Do Not Use’ list.  Contact Customer Service on 1800 833 372 or For technical support, contact Technical Service Support on 1300 729 258 or CareFusion Australia  CareFusion New Zealand  PH: 1800 833 372  PH: 0508 422 734  © 2015 CareFusion Corporation or one of its affiliates. All rights reserved. CareFusion, the CareFusion logo and Alaris are registered trademarks of CareFusion Corporation or one of its affiliates. All other trademarks are property of their respective owners. IF3248 (0514/PDF). AL433/May15/v2
File Type: PDF
File Size: 100 KB
File Name: Alaris System Cleaning Product Guidelines Sw V2 May 2015.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions