PT-INR Professional Monitoring Systems

INRatio PTINR Monitoring System Quick Reference Guide ver 1

Quick Reference Guide

1 Page

Alere INRatio®2 PT/INR System Quick Reference Guide 1  4  Make sure Test Strip is at room temperature and prepare other supplies.  If needed, change the strip code on the screen by pressing the UP/DOWN button. Press OK to change a digit. Press OK again to proceed with the test. Wait for the monitor to warm up.  2  5  Turn on the monitor by pressing the centre of the silver button or by inserting a Test Strip.  When the system beeps and shows a green light, it is time to perform a finger stick.  3  6  Insert the Test Strip at the prompt, check the strip code on the screen matches the strip code.  Immediately apply a large, hanging drop of blood to the sample well of the Test Strip. Allow the blood drop to touch the well and hold there until machine beeps.  Please refer to the user guide and pack insert for complete instructions.  Technical Support - AU 1800 622 642 +61 7 3363 7711 +61 7 3363 7199  Freecall in Aus Phone Fax Email  Make sure you apply the sample directly over the green light.  7 The results will appear when the test is finished.  Technical Support - NZ  0800 466 951		 Freecall in NZ 0800 466 958 Fax Email © 2014 Alere. All rights reserved. The Alere Logo, Alere and INRatio2 are trademarks of the Alere group of companies. A2120
File Type: PDF
File Size: 129 KB
File Name: inratio_ptinr_monitoring_system_quick_reference_gui.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions