SC1000 Instructions for Use Configuration Manager

Contents 1

Introduction ... 3

2

Installation... 3

3

SC1000 Software Update ... 5

4

User Interface ... 6 4.1

Root Menu ... 6

4.1.1

SETUP Button ... 6

4.1.2

TRACE SPEED button... 7

4.1.3

TRENDS Button... 7

4.2

Setup Button Menu ... 11

4.2.1

System Menu ... 12

4.2.2

Patient Menu... 16

4.2.3

Recorder Menu ... 19

4.2.4

ECG Menu ... 21

4.2.5

RESP Menu ... 28

4.2.6

SPO2 Menu ... 32

4.2.7

TEMP Menu ... 38

4.2.8

IBP1 Menu ... 42

4.2.9

IBP2 ... 51

4.2.10

NIBP Menu ... 52

4.2.11

CO2 Menu ... 60

4.2.12

DEFAULTS Menu ... 69

4.2.13

ALARM SETUP Menu ... 69

4.3

Comport Setup... 73

4.4

Saving Configuration’s for future use ... 73

4.5

Setting Defaults ... 74

4.6

Default Alarm Limits ... 75

4.7

Transferring the configuration file ... 76

4.8

Restoring Factory Defaults... 77

2

1 Introduction The SC1000 configuration manager is a software utility that was developed to manage the SC1000 default settings. The software enables the technician to use common configuration settings across all of their SC1000 Smartsigns compact monitors. Through the utility the user can build up a library of common configuration files that can be uploaded to the SC1000 via the monitor’s serial port connection. These configuration files can be tailored to suit the needs and requirements of different wards.

2 Installation To install the SC1000 Configuration utility you will require windows based computer with a serial port connection or a USB to serial port adapter, CD/DVD drive and an internet connection. The configuration manager can only be installed on a Windows XP or newer versions of operating system running. Once complete the system will request a reboot. Switch the PC on, once windows has fully loaded insert the disk in to the CD/DVD drive of the computer. The below window will appear, select Open folder to view files. If the installation does not automatically start then, proceed as follows:Select start now select computer and locate and select your CD/DVD drive.

3

Open the Setup folder and select the “setup.exe” Icon.

Double click on the Icon and the installation will begin. Agree to the .Net frame work EULA when if prompted.

Once the installation is completed an Icon will be available on your ‘All programs’ menu.

4

3 SC1000 Software Update The SC1000 configuration manager will only work with SC1000 software version 2.0.0 or above installed. To check the software version that is installed on your SC1000, turn the monitor on, the first user input screen you are presented with is shown below.

If the monitor has previously been configured using the configuration manager, the Patient group selection screen might have been disabled. To confirm the software version, select the SETUP button on your monitor and the version number will be displayed at the bottom of the Setup page.

If you do not have the correct version installed, locate the update that came with the SC1000 configuration manger. Refer to SC1000 Service manual for guidance on upgrading the Monitor software.

5

4 User Interface 4.1 Root Menu When the SC1000 Configuration manager has been started you will be presented with the screen shown below.

4.1.1 SETUP Button Selecting the setup button from the root menu will display the SETUP Button menu to the right of the root menu. Removing the tick from the Enabled check box below the root menu, will disable all buttons in the setup button menu functions on the target monitor.

6

4.1.2 TRACE SPEED button Removing the tick from the Enabled check box below the root menu, will disable all buttons in the setup button menu functions on the target monitor.

The drop down selection box allows the selection of the trace speed, this can be set to:• • • •

6.25mm/s 12.5mm/s 25mm/s 50mm/s

Factory default setting is 25mm/s.

4.1.3 TRENDS Button Selecting the TREND button from the root menu will display the TREND Button menu to the right of the root menu. Removing the tick from the Enabled check box below the ROOT button menu with the TREND button selected, will disable all buttons on the TREND button menu on the target monitor after update.

All settings will still be visible to the user but they will not be able to able to make changes to them. 7

ECG HR button Removing the tick from the Enabled check box below the TRENDS button menu with the ECG HR button selected, will disable the ECG TRND Button, preventing the user from switching on and off the ECG trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on.

RESP BR Removing the tick from the Enabled check box below the TRENDS button menu with the RESP BR button selected, will disable the RESP BR TRND Button, preventing the user from switching on and off the RESP trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on. Example as per ECG HR.

SPO2 O2 Removing the tick from the Enabled check box below the TRENDS button menu with the SPO2 O2 button selected, will disable the SPO2 O2 TREND Button, preventing the user from switching on and off the SPO2 O2 trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on. Example as per ECG HR.

8

SPO2 PR Removing the tick from the Enabled check box below the TRENDS button menu with the SPO2 PR button selected, will disable the SPO2 PR TREND Button, preventing the user from switching on and off the SPO2 PR trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on. Example as per ECG HR.

TEMP T1 Removing the tick from the Enabled check box below the TRENDS button menu with the T1 button selected, will disable the T1 TREND Button, preventing the user from switching on and off the T1 trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on. Example as per ECG HR.

TEMP T2 Removing the tick from the Enabled check box below the TRENDS button menu with the T2 button selected, will disable the T2 TREND Button, preventing the user from switching on and off the T2 trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on. Example as per ECG HR.

IBP1 Removing the tick from the Enabled check box below the TRENDS button menu with the IBP1 button selected, will disable the IBP1 TREND Button, preventing the user from switching on and off the IBP1 trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on. Example as per ECG HR.

9

IBP2 Removing the tick from the Enabled check box below the TRENDS button menu with the IBP2 button selected, will disable the IBP2 TREND Button, preventing the user from switching on and off the IBP2 trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on. Example as per ECG HR.

CO2 ETCO2 Removing the tick from the Enabled check box below the TRENDS button menu with the CO2 button selected, will disable the ETCO2 TREND Button, preventing the user from switching on and off the ETCO2 trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on. Example as per ECG HR.

CO2 RR Removing the tick from the Enabled check box below the TRENDS button menu with the CO2 RR button selected, will disable the CO2 RR TREND Button, preventing the user from switching on and off the CO2 RR trend data. The drop down selection box allows on or off to be selected as the default. Factory default is on. Example as per ECG HR.

10

CLEAR TRENDS Removing the tick from the Enabled check box below the TRENDS button menu with the CLEAR TRENDS button selected, will disable the CLEAR TRENDS Button, preventing the user from clearing all patient trend data on the target monitor.

4.2 Setup Button Menu Selecting any of the buttons on the setup menu will bring up the related button menu to the right of the setup menu as shown below.

11

4.2.1 System Menu Removing the tick from the Enabled check box below the set up menu, with the system button selected, will disable the sub functions of this button on the target patient monitor.

LANG Removing the tick from the Enabled check box below the SYSTEM button menu, with the LANG button selected, will disable the user’s ability to change the language setting on the target monitor.

The drop down selection box allows the default language to be set. Factory default is English.

12

TIME/DATE Removing the tick from the Enabled check box below the SYSTEM button menu, with the TIME/DATE button selected, will disable the user’s ability to change the time and date on the target monitor.

SUSPEND Removing the tick from the Enabled check box below the SYSTEM button menu with the SUSPEND button selected, will disable the user’s ability to change the suspend duration on the target monitor. The drop down selection box allows the default suspend duration to be set to 2minutes, 5 minutes, 15minutes and infinity on the target monitor.

13

BRILLIANCE Removing the tick from the Enabled check box below the SYSTEM button menu with the BRILLIANCE button selected, will disable the user’s ability to change the BRILLIANCE of the display on the target monitor. The bar that appears below the SYSTEM button menu with the BRILLIANCE button selected shows a graphical representation of the default brilliance setting, this can be set from minimum to maximum over 31 steps, using the up(right arrow button) and down (left button). Factory default value is 20.

BEEP VOLUME Removing the tick from the Enabled check box below the SYSTEM button menu with the BEEP VOLUME button selected, will disable the user’s ability to change the beep volume on the target monitor. The bar that appears below the SYSTEM button menu with the BEEP VOLUME button selected shows a graphical representation of the default beep volume setting, this can be set from minimum to maximum over 31 steps, using the up (right arrow button) and down (left button). Factory default is 16.

14

ALARM VOLUME Removing the tick from the Enabled check box below the SYSTEM button menu with the ALARM VOLUME button selected, will disable the user’s ability to change the suspend duration on the target monitor. The bar that appears below the SYSTEM button menu with the ALARM VOLUME button selected shows a graphical representation of the default alarm volume setting, this can be set from minimum to maximum over 31 steps, using the up(right arrow button) and down (left button). Factory default is 16.

DEMO MODE Removing the tick from the Enabled check box below the SYSTEM button menu with the DEMOMODE button selected will disable the user’s ability to put the target monitor in to demo mode.

15

4.2.2 Patient Menu Removing the tick from the Enabled check box below the setup button menu with the PATIENT button selected, disables the user’s ability to change the NAME /REF, BED NUMBER GROUP and NEW PATIENT defaults to be selected and restrictions applied, if required.

CHANGE NAME/REF Removing the tick from the Enabled check box below the PATIENT button menu, with the CHANGE NAME/REF button selected, will disable the user’s ability to change the patient name and reference number on the target monitor.

16

BED NUMBER Removing the tick from the Enabled check box below the PATIENT button menu, with the BED NUMBER button selected, will disable the user’s ability to change the bed number on the target monitor. The drop down selection will enable you to set the default bed number of the target monitor between 1 and 16.

The bed number is a requirement of the CentralView patient monitoring system. All monitors that are intended for use on the CentralView system MUST have a unique bed number. If 2 units are connected with the same number, this will cause one or both of the monitors not to connect or either monitor intermittently connecting.

17

GROUP Removing the tick from the Enabled check box below the PATIENT button menu, with the GROUP button selected, will disable the user’s ability to change the selected patient group on the target monitor. The default patient group can be selected from the dropdown selection box with the following options. • • • •

Select at power on Adult Paediatric Neonatal

Select at power on giver the user the option to select the required patient group. If Adult, Paediatric or neonatal is selected, the option screen will not appear at boot up. Selecting the patient group and removing the tick from the Enabled checkbox will fix the unit to the selected patient group. The user will not be able to change. Selecting “select at power on” and removing the tick from the Enabled check box will enable the user to select the required patient group at power on, but they will not be able to change the patient group selected during operation. They will need to switch the monitor off and back on to change the selected patient group.

18

NEW PATIENT Removing the tick from the Enabled check box below the PATIENT button menu will disable the NEW PATIENT BUTTON on the target monitor.

This will prevent the user from selecting new patient that would clear all patient related data as well as reset all alarms to their default settings.

4.2.3 Recorder Menu Removing the tick from the Enabled check box below the RECORDER button menu, with the RECORDER button selected, will disable the user’s ability to change Recorder settings on the target monitor.

19

Recorded Waves Selecting the Recorder button will bring up the recorder button menu allowing the default recorder Wave1, Wave2, Wave 3 and Wave 4 to be selected.

Removing the tick from the Enabled check box prevents the user of the target monitor from changing this setting. Each wave can be set to Off, ECG, ECG II (Five lead patient cable and dual trace must be on) RESP and SPO2 can be selected for printing; no wave can be set the same as another wave.

HR Alarm Print Removing the tick from the Enabled check box below the recorder menu with the ALARM PRINT button selected, prevents the user from changing the alarm print settings of the target monitor.

The drop down selection box allow the default setting to set to on or off. Factory default is off.

20