Guide
2 Pages
Preview
Page 1
Definition of Symbols Symbol
Name and meaning Pedal for height adjustment Pressing this pedal will increase the height of the unit. Pedal for height adjustment Pressing this pedal will decrease the height of the unit. General attention Indicates unspecified general danger, warning or caution. Caution: Hot surface Indicates that the surface can be dangerously hot under certain conditions. Detaching procedure of the humidity chamber Pull the humidity chamber cover down to the position shown in the figure on the left. Draw out the humidity chamber until it stops halfway. Lift up the humidity chamber slightly and remove from the unit.
Installation procedure of the humidity chamber Push the humidity chamber gently into the main body until the marking shown in the figure on the left is visible. Close the humidity chamber cover.
Installation procedure of the mattress platform tray To replace the mattress platform tray to its former position, make sure that it is engaged securely with the tilting arm. Mode change : Radiant warmer mode : Incubator mode Mode change : Incubator mode : Radiant warmer mode Avoid getting caught Indicates that the user must avoid getting caught in the gap in the device. Type BF applied part Indicates that the device is classified as Type BF in terms of the degree of protection against an electric shock. Skin temperature probe connecting port 1 Connecting port for the skin temperature probe 1.
C6591640
Symbol
Name and meaning Skin temperature probe connecting port 2 Connecting port for the skin temperature probe 2. Sensor module connecting port Connecting port for the sensor module. WEEE symbol In the EC area, an electrical and electronic product falling in one of the categories specified by “DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on Waste Electrical and Electronic Equipment (WEEE)” should be disposed of in a manner consistent with relevant laws and regulations. This symbol indicates that the above-mentioned requirement applies to this product. Date of manufacture Indicates the date when the unit was manufactured in the factory. Product version Indicates the product version. Load capacity Indicates the maximum load capacity. Supply prohibition of humidity oxygen Never supply humidified oxygen from the oxygen supply port. AC power indicator The indicator lamp comes on in green when the unit is connected to the AC power source. It comes on in red when no power is supplied to the unit. Locked Indicates a locked condition. Unlocked Indicates an unlocked condition. Press Indicates that the lock function will be released when the key with this symbol is pressed. Do not immerse Indicates that the humidity chamber must not be immersed in water. Oxygen supply port 1 Indicates the oxygen supply port when oxygen is supplied through the flowmeter. Oxygen supply port 2 Indicates the oxygen supply port for the piping connecting hose when the oxygen controller is used.