ATOM Medical Corporation

Incubators

i series Incubators Recommended Chemicals for Cleaning and Disinfection Guideline Nov 2016

Guideline

1 Page

Hood (Inc. Access port) Mattress Mattress platform (Inc. X-ray tray) Mattress platform tray Middle board Tilting arm Conditioning chamber Main unit outer case Humidity chamber Display (Excluding LCD panel) Heater Skin temperature probe Sensor module Inner panel LCD panel Mattress platform for weight monitor Tray for weight monitor Fan cover Boiler (Humidity chamber) Warmner area Reflecting board Sodium hypochlorite      X  X X  X X X      X  X Ethanol X  X X X  X X  X  (*1) X X X X X X  X  Isopropanol X  X X X  X X  X  (*1) X X X X X X  X  Ethanol, isopropanol X  X X X  X X  X  (*1) X X X X X X  X  Isopropanol, eucalyptus oil X  X X X  X X  X  (*1) X X X X X X  X  Benzalkonium chloride (ethanol solution) X  X X X  X X  X  (*1) X X X X X X  X  Chlorhexidine gluconate X  X X X  X X  X  (*1) X X X X X X  X  Hydrogen Peroxide 0.1 -1.5%                      Hydrogen peroxide 7%      X  X X  X X X      X  X Benzalkonium chloride (water solution)                      Benzalkonium chloride                      Chlorhexidine gluconate (ethanol solution)                      Alkyldiaminoethylglycine hydrochloride                      Parts Class Method Guideline of recommended chemicals for cleaning and disinfection for i series incubators Parts to be wiped for cleaning Middle level Low level Chemical disinfection Disinfectant (*1) Skin temperature probe can be cleaned by ethanol disinfection but the surface of cable may be hardened by deterioration due to repeated cleaning. Snap-open access port packing Admittance panel packing Boiler cap Cartridge tank Tank cap Fan Baby guard Tube introduction slit packing Oxygen sensor cap X-ray cassette tray door packing Canopy packing Patiend circuit slot grommet Sodium hypochlorite     X X       Hydrogen Peroxide 0.1 -1.5%             Hydrogen peroxide 7%      X       Benzalkonium chloride (water solution)             Benzalkonium chloride             Chlorhexidine gluconate (ethanol solution)             Alkyldiaminoethylglycine hydrochloride             Parts Class Method Parts to be immersed for cleaning Low level Middle level Chemical disinfection Disinfectant [ Remarks ] 1 The effect of disinfectant may vary depending on target bacteria. Follow the instruction of disinfectant to be used. 2 Some disinfectants may include alcohol that is prohibited for use on ATOM's infant warmer. Make sure to check the ingredients in the disinfectant to be used before use. 3 Refer to product's operation manual for more information about disinfection method. 4 This list is the result of study based on general information related to disinfectants and it includes some information that is not a verification result that the disinfectant is actually used. Before using your disinfectant, try to use it at obscure place of the product and check that there is no change of color and deterioration. 5 Please note that information in this document is subject to change without notice depending on market information.
File Type: PDF
File Size: 73.3 KB
File Name: Guideline of recommended chemicals for cleaning and disinfection (Infant Incubator) updated_20161103.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions

Preview

Page 1

Previous PageNext Page