Test Sheet
2 Pages
Preview
Page 1
Inspection log for technical safety inspections (TSI) Owner:
_______________________
Serial number:
_________________________
_______________________
Start-up:
_________________________
_______________________
Date:
_________________________
Internal Device-ID-No. (Owner): NOTE:
Barkey plasmatherm
____________________________________________________
The following checks must be carried out every 12 months on this device. They may only be carried out by persons who are competent in this field due to training.
not OK
OK
1. Visual inspection – Damage to enclosure – Damage to heating chamber and cover – External damage to connecting cables or to connecting plugs – Signs of overloading or improper handling – Inadmissible access and alterations – Soiling and corrosion affecting safety – Legibility of labelling – Ventilation openings not soiled or blocked – Sealing stoppers for water watertight
2.
Maintenance – Clean fan and ventilation openings – Replace batteries (every 3 years) – Check date and time and set if necessary
3.
Temperature check
pl-201-SV-0000-01/V2 GB page 1
Reference thermometer (serial number):
4.
___________________________
– Reference temperature
(45,0 ± 0.5 °C) _________ °C
– Temperature display in device, heater:
(Ref ± 0.5 °C) _________ °C
– Temperature display in device, feed:
(Ref ± 0.5 °C) _________ °C
– Software overtemperature triggering:
(46,0 ± 0.5 °C) _________ °C
– Hardware overtemperature triggering:
(48,0 ± 1.0 °C) _________ °C
Fill level check – Function fill level sensor “Top” – Function fill level sensor „Middle“ – Function fill level sensor „Bottom“
Inspection log for technical safety inspections (TSI) Owner:
_______________________
Serial number:
_________________________
_______________________
Start-up:
_________________________
_______________________
Date:
_________________________
Internal Device-ID-No. (Owner): NOTE:
Barkey plasmatherm
____________________________________________________
The following checks must be carried out every 12 months on this device. They may only be carried out by persons who are competent in this field due to training.
not OK 5.
– 6.
Water replacement with 2 Micropur tablets Measurements in accordance with 62353: 2008-08 Testing device:
7.
OK
Replacing water
____________________________
– Protective earth res. (incl. power cable):
(RSL ≤ 0.3 Ω)
_________ Ω
– Insulation resistance:
(RISO ≥ 2 MΩ)
_________ MΩ
– Device leakage current:
(∆I ≤ 500 µA)
_________ µA
Functional inspection – Green LED illuminates after the device being switched on – Yellow LED flash twice when the device being switched on – Double acoustic signal when the device being switched on – Cushions fulfill when program is started
8.
Moisture sensores – Acoustic warning signal and blinking display with warning
9.
Cover limit switch – Heating cushions empty and paddle does not move
10. Comments:
______________________________________________________________________
pl-201-SV-0000-01/V2 GB page 2
11. TSI has been passed
no
yes
12. Attaching the inspection label
Test carried out by (company / department): ________________________________
Technician:
_______________________
________________________________
Date:
_______________________
________________________________
Signature:
_______________________