Berchtold Corporation
CHROMOPHARE D 200, D 300 Service Manual
Service Manual
26 Pages
Preview
Page 1
®
CHROMOPHARE D 200 ® CHROMOPHARE D 300 Service-Manual (D, E)
CHROMOPHARE® D 200, D 300 Service Manual (D, E)
5
4.500*
Colour temperature (K)
Electrical system
Average life of halogen lamp
Halogen lamp
Total weight/torque
1000 h
1000 h
1000 h
Ord. No. CZ 945-24
1000 h
24 V – 40 W
12 V – 35 W
4 kg/ 21 Nm
1.500
1.170
207
210
165
3.600*
60 – 130 cm
140
20.000
25.000
45 VA
Dto.
D 200 Wall
According to international safety standards IEC/VDE
1000 h
24 V – 50 W
24 V – 40 W
Ord. No. CZ 904-24
24 V – 50 W
12 V – 35 W
4,8 kg/16 Nm
1.500
1.170
207
210
165
3.600*
60 – 130 cm
140
20.000
25.000
24 V – 50 W
12 V – 50 W
8,3 kg
1.100
850
445
290
240
4.500*
60 – 130 cm
140
30.000
35.000
Dto. 45 VA
D 200
Ord. No. CZ 940-12
12 V – 50 W
5,8 kg/ 53 Nm
1.100
1.500
445
290
240
4.500*
60 – 130 cm
140
30.000
35.000
65 VA
Dto.
D 300 Mobil
Ord. No. CZ 955-12
12 V – 50 W
6,6 kg/ 45 Nm
1.100
Height adjustment (mm)
445
Light emission surface area (cm2) 1.500
290
– lamp housing
Swivel radius (mm)
240
– polygon reflector
Diameter (mm)
60 – 130 cm
140
30.000
35.000
Dto. 65 VA
65 VA
D 300 Wall
110/120/230/240 V
D 300
Max.. working distance
Field diameter (mm)
Max. illuminance in 1 m distance (Lux)
Max. illuminance in 0,8 m distance (Lux)
Power requirements
2. Technical data
1000 h
24 V – 40 W
12 V – 35 W
7,3 kg
1.160
900
207
210
165
3.600*
60 – 130 cm
140
20.000
25.000
45 VA
Dto.
D 200 Mobil
1000 h
24 V – 40 W
12 V – 35 W
3,3 kg
1.100
1.170
207
210
165
3.600*
60 – 130 cm
140
20.000
25.000
45 VA
Dto.
D 200 Clip
3. Fehlersuche 3. Trouble-shooting
6
2.1 Schalten Sie die Leuchte am Drehregler ein. Kontrollieren Sie die strufenlose Helligkeitsregelung von etwa 40 % bis 100 % Beleuchtungsstärke.
2.1 Switch on the light by means of the rotary button. Check the continously variable illumination of 100 % to approx 40 %.
2.2 Sollte die Halogenlampe nicht leuchten, öffnen Sie die Leuchtenhaube mit einem Fingerdruck auf die Entriegelungslasche.
2.2 Shouldn´t the bulb not come up, open the lamp head by pressing the push-button to release the lamp case
2.3 Überprüfen Sie die Halogenlampe und setzen Sie bei deren Defekt eine neue Halogenlampe ein. --> siehe Montageanleitung Sollte trotz intakter Halogenlampe die Leuchte nicht funktionieren, muß die max. Halogenlampenspannung von etwa 12 Volt überprüft werden.
2.3 Check the halogen bulb and put in a new one if it is defective. --> please see mounting instruction If the light still shouldn´t work the bulb supply voltage of max. 12 Volt has to be checked..
Achtung: Unbedingt vorher Stromzufuhr der Leuchte durch Ziehen des Netzkabels oder durch Ausschalten am Hauptschalter unterbrechen.
Attention: Power must be turned off to the light by disconnecting the mains cable or switching off at mains switch.
Leuchtentyp – Wand
Wall mounted light
2.4 Überprüfen Sie die Netzspannungsversorgung, Meßpunkt: L1/ N
2.4 Check the mains voltage measuring point: L1/N
Horizontaler Arm/Federgelenk
Horizontal arm/spring joint
2.5 Bei Unterbrechung der Netzspannung zwischen elektrischem Anschlußteil (Wand, Decke) und elektronischem Trafo (Seite 10) müssen die Steckverbindungen auf elektrische Unterbrechung überprüft werden.
2.5 At interruption of mains voltage between electrical joint (wall, ceiling) and electronic transformer (page 10) the plug connections have to be checked on electrical interruption.
CHROMOPHARE® D 200, D 300 Service Manual (D, E)
Leuchtentyp – Decke
Ceiling monted light
2.6 Überpüfen Sie die Netzspannungsversorgung. Meßpunkt: L1/N
2.6 check the mains voltage measuring point: L1/N
Horizontaler Arm/Federgelenk
Horizontal arm/spring
2.7 Bei Unterbrechung der Netzspannung zwischen elektrischem Anschlußteil (Wand, Decke) und elektronischem Trafo (Seite 10) müssen die Steckverbindungen auf elektrische Unterbrechung überprüft werden.
2.7 At interruption of mains voltage between electrical joint (wall, ceiling) and electronic transformer (page 10) the plung connections have to be checked on electrical interruption.
Horizontaler/Vertikaler Arm
Horizontal /vertical arm
Fehlersuche: siehe 2.7
Trouble shooting see option 2.7
CHROMOPHARE® D 200, D 300 Service Manual (D, E)
7
Beschreibung description
Teile Nr. part no.
Abbildung auf Seite description on page
Haubendeckel D 200 light head cover for D 200
59072
15
Haubendeckel D 300 light head cover for C 300
59075
15
Netzschalter, 230 Volt mains switch, 230 Volt
59271
15
Netzschalter, 120 Volt mains switch, 120 Volt
59270
15
412
15
Anschlußplatine mit Poti und Sicherungen, 230 Volt nur gültig bis Versin 2210 mains connection board with potentiometer and fuses, 230 Volt only valid up to version 2210
59036
15
Anschlußplatine mit Poti und Sicherungen, 120 Volt nur gültig bis Versin 2210 mains connection board with potentiometer and fuses, 120 Volt only valid up to version 2210
59037
15
Anschlußplatine mit Poti , 230 / 120 Volt Gültig ab Version 2210 und nach Umbau auf Platine mains connection board with potentiometer, 230 /120 Volt Valid from version 2210 and P. C. B. electronics
63712
15
316
16
Tellerfeder plate spring
59056
16
Bremsbelag brake lining
59065
16
Bremsschreibe brake disc
59033
16
Gasfeder D 200 Decke/Wand/Mobil gas spring for D 200 ceiling/wall/mobile
59120
16
Gasfeder D 200 Clip gas spring for D 200 clip
59053
16
Gasfeder D 300 Decke/Wand/Mobil gas spring for D 300 ceiling/wall/mobile
59052
16
Gewindestift hexagonal screw
Sechskantmutter hexagonal nut
10
CHROMOPHARE® D 200, D 300 Service Manual (D, E)
Elektronische Helligkeitsregulierungsplatine / electronic light regulation board Elektronische Helligkeitsregulierung P.C.B. light intensity control D 200 100 Volt, Teile Nr. 65316 / part no. 65316 110 Volt, Teile Nr. 65317 / patr no. 65317 120 Volt, Teile Nr. 65318 / patr no. 65318 127 Volt, Teile Nr. 65319 / part no. 65319 220 Volt, Teile Nr. 65320 / part no. 65320 230 Volt, Teile Nr. 65321 / patr no. 65321 240 Volt, Teile Nr. 65322 / part no, 65321 D 300 100 Volt, Teile Nr. 65323 / part no. 65323 110 Volt, Teile Nr. 65324 / patr no. 65324 120 Volt, Teile Nr. 65325/ patr no. 65325 127 Volt, Teile Nr. 65326 / part no. 65326 220 Volt, Teile Nr. 65327 / part no. 65327 230 Volt, Teile Nr. 65328 / patr no. 65328 240 Volt, Teile Nr. 65329 / part no, 65329 Achtung! Bei Abgleich von R1 muß der Drehknopf (s. Seite 12) auf max. Helligkeit gedreht sein, bzw. R2 auf min.
1 Sicherung 230 Volt, Teile Nr. 44492 Sicherung 120 Volt, Teile Nr. 59269 fuse, 230 Volt, part no. 44492 fuse 120 Volt, part no. 59269
Attention! When adjusting Trimmer R1 max. intensity of lightness had to be chosen with the rotary button (see page 12), or Trimmer R2 respectively min. light intensity.
2 R1 max, 12,1 Volt A.C. unter Last / with load R2 min. 9,6 Volt A.C. unter Last / with load
Reparatur-Set für oben abgebildeten Trafo:
Repair-Set for above displayed transformer:
Gehäuseschale Klebeband Anschlußplatine mit Poti Drehknopf Elektronische Helligkeitsregelung
plastic-housing tape mains connection board with potentiometer rotary button P. C. B. light intensity control
230 Volt D 200 Decke und Wand D 200 Mobil und Clip D 300 Decke und Wand D 300 Mobil 120 Volt D 200 Decke und Wand D 200 Mobil und Clip D 300 Decke und Wand D 300 Mobil
63797 63796 63827 63829
63799 63798 63828 63830
230 Volt D 200 ceiling mounted and wall D 200 mobile and clip D 300 ceiling mounted and wall D 300 mobile 120 Volt D 200 ceiling mounted and wall D 200 mobile and clip D 300 ceiling mounted and wall D 300 mobile
CHROMOPHARE® D 200, D 300 Service Manual (D, E)
63797 63796 63827 63829
63799 63798 63828 63830
13
1 Halogenlampe / halogen lamp Artikel Nr. für D200 Artikel Nr. für D300
Gültig für Version 12 Volt CZ 940-12 CZ 955-12
Valid for Version 24 Volt CZ 945-24 CZ 904-24
Artikel Nr. für D200 Artikel Nr. für D300
CZ 940-12 CZ 955-12
CZ 945-24 CZ 905-24
2 Keramikfassung, Teile Nr. 59277 ceramic lamp holder, part no. 59277 1 Kreuzschlitzschraube, Teile Nr.59274 philips pan head screw, part no. 59274 2 Kupferbefestigungssegment, Teile Nr. 59338 cupper fixation part, part no. 59338
Handgriff, Teile Nr. 59073 handle, part no. 59073
Rolle mit Bremmse, Teile Nr. 64430 ohne Bremse, Teile Nr. 64429 wheel with stop, part no. 64430 without stop, part no. 64429 1 Befestigungsring für Stativrohr, Teile Nr. 59319 fixation ring for vertical boom, part no.59319 2 Gewindestift, Teile Nr. 62002 hexagon socket set screw, part no. 62002
14
CHROMOPHARE® D 200, D 300 Service Manual (D, E)
Haubendeckel D 200, Teile Nr. 59072 D 300, Teile Nr. 59075 light head cover D 200, part no. 59072 D 300, part, part no. 59075
1 Gewindestift, Teile Nr. 412 hexagon socket set screw, part no. 412 2 Netzschalter 230 Volt, Teile Nr. 59271 120 Volt, Teile Nr. 59270 mains switch 230 Volt, part no. 59271 120 Volt, part no. 59270 Gültig bis Version 2210 valid up to version 2210 Anschlußplatine 230 Volt, Teile Nr. 59036 120 Volt, Teile Nr. 59037 mains connection board with potentiometer and fuses 230 Volt, part no. 59036 120 Volt, part no. 59037 1 Sicherung F1 / F2
230 Volt, Teile Nr. 44492 120 Volt, Teile Nr. 59269
fuse F1 / F2
230 Volt, part no. 44492 120 Volt, part no. 59269
Gültig ab Version 2210 und nach Umbau auf Platine valid from version 2210 and P.C.B. electronics Anschlußplatine 230 / 120 Volt, Teile Nr. 63712 mains connection board with potentiometer 230 / 120 Volt, part no. 63712
CHROMOPHARE® D 200, D 300 Service Manual (D, E)
15
6.
Einstellung der Bremskraft Adjustment of the friction screw Durch entfernen der Schrauben Teile Nr. 49107 und 274 kann das Gehäuse geöffnet werden. The side cover can be opened by removing the screw part no. 49107 and 274. Notwendige Werkzeuge: Kreuzschlitzschraubendreher Größe 1 Gabelschlüssel mit SW 13 mm necessary tools: phillips screw-driver size 1 spanner 13 mm
+ Erhöhung der Bremswirkung, wenn Leuchtenkörper nicht in eingestellter Position bleibt increase of friction, if the light head does not stay in adjusted position - increase of friction, if the light head does not stay in adjusted position decrease of friction, if the light head is adjustable to hard Notwendige Werkzeuge: Sechskantschlüssel 3 mm necessary tools: allen key 3 mm
18
CHROMOPHARE® D 200, D 300 Service Manual (D, E)