bk3000 & bk5000 Getting Started Guide Ref 2300 Oct 2018

USB 3.0 connector

ON/Standby button

CD/DVD reader/writer

1 Turn knob to make system easier or harder to rotate on stand

USB 2.0 connector

Cable holder and release handle. To adjust system height, hold control panel on both sides and pull up on the release handles while moving the control panel up or down

Note: Tighten knob before moving system.

Flip lever left to lock, and right to unlock Transducer socket 2 Lock wheels before use

2

Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

Before You Start Before you turn on the system, make sure that the installation has been approved by a qualified electrician or by hospital safety personnel.

Turning System On and Off

When you turn the system on or off, you must give the system enough time to save and recover open files and unsaved data. Otherwise, a serious system failure may occur that requires technical support. Caution S-c4: Never unplug the system from the wall while it is running. Turn off the system and wait for the light on the keyboard and the ON/Standby button to go out before unplugging. To Turn On:

1

Press the ON/Standby button once. Wait until startup screen disappears before you do anything else. To Turn Off: Make sure system is completely up and running. Press the ON/Standby button one time. Note : Always follow the recommended procedure for shutting down your system.

Connecting Transducers To Connect:

2

1. 2.

Insert transducer plug into socket with locking lever to the right. Turn locking lever on socket to the left.

To Disconnect: 1. 2. 3.

Freeze image. Turn locking lever on socket to the right. Remove plug from socket.

Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

3

Performing an Exam Keys are described on pages 6 and 7.

1.

Press Patient key. Enter patient information. Patient ID field populates automatically with date and time. (Tab to move between fields.) Click Start New Exam or press unfreeze.

2.

To change transducer type, press button on transducer or press Probe key and select transducer (probe).

3.

To change exam type, press Exam type key. Select examination type.

4.

Imaging starts in B‑mode.

5.

Select highest frequency possible (Freq on monitor) to give needed penetration.

6.

Adjust other imaging parameters. Turn Depth and Gain dials to adjust depth and gain as needed.

7.

When you want to make a measurement or capture an image, press Freeze key to freeze image. (Measurement tab opens.)

8.

To make a measurement, press Measure key or select measurement keys on monitor. Make the measurement.

9.

Press Capture key to capture the image (save it to system hard disk). It appears as a thumbnail at the top of the monitor. Frozen = image, Unfrozen = clip. Capture turns red while recording. Click again to stop recording.

10. Press Freeze key to start imaging again. 11. Press End exam key to conclude exam.

4

Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

Exam Type

selected Pro Package

An examination type specifies both a Pro Package and a Diagnostic Setup/Preset. The Pro Package affects the system user interface - which tabs and controls are displayed, which measurements are allowed, etc. The Diagnostic Setup/Preset affects the ultrasound image - sets the gain, depth, frequency, etc.

selected Diagnostic Setup

Viewing and Copying Images To select captured images to view them or copy them to another device, use the document pane at the top of the monitor (described on pages 8 and 9).

View Double-click thumbnail in document pane. Document is displayed in image area.

Copy to USB or CD/DVD To Copy Captured Images: 1. 2. 3. 4.

Insert USB device or CD/DVD. Click each image to be copied. Frame turns blue. Click Copy, then select destination (USB or CD/DVD). The options without Patient ID are recommended for patient security. Images are copied to USB immediately. Click USB Eject to remove USB device. When you select CD/DVD, images are copied to a staging area. To copy them to the CD/DVD, click Burn CD and follow instructions.

System Busy When the system is busy, a spinning disk appears on the lower right hand side of the monitor. Note: Wait until the spinning disk disappears before using any controls, including buttons on the transducer.

Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

5

Keyboard TGC sliders Adjust gain in different parts (depths) of the image

See ‘Performing an Exam’ page 4

Doppler

Color

B-Mode Image

Adjust a value or size of zoom box, etc.

Capture Trackball and keys with PC-mouse functionality Select

Select

Print Select

Freeze: Start/ Stop imaging

User-defined keys. See the bk3000/bk5000 Advanced User Guide.

Keys are Backlighted

6

If light is

Key function

Bright

On

Dim

Available but not on

Off

Unavailable

Monitor Brightness Increase

+

Decrease

+

Default setting

+D

Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

B-Mode Image Keys Focus Select focus indicator on monitor Harmonic Press for on and off

B-Mode/Gain When imaging: Press: B-mode Turn: B-mode gain When frozen: Turn: Scroll Cine Press: Change dial to Post Gain Measure Start default measurement

Spectral Doppler Keys Doppler Angle Angle on and selected Long press: Angle off Update Changes which Triplex mode is imaging and which is frozen Long press: Unfreeze both views Cancel/Undo Update in most pro packages Doppler Mode Press: Doppler mode Turn: Doppler mode gain In B-mode, controls MI In M-mode, controls M mode gain

Puncture Guide

Puncture line or brachy matrix on 3D

Press for 3D box and click again to start 3D ac‑

quisition Long press: 3D off

Zoom/Depth Turn: Adjust depth Press: Zoom box on Turn: Resize zoom box 2nd press: Zoom area inside box 3rd press: Zoom off, dial returns to Depth Long press: Zoom off Calculate Start first measurement for default calculation

Color Doppler Keys Steer Change beam angle in Color/Power/ Doppler modes Power Mode Press for on and off

Color Mode Press: Color mode Turn: Color/Power mode gain Color Box Press for on and off

Doppler Gate Press for on and off

Volume Baseline Scale Adjust Color/Power/ Doppler scale/PRF) Invert Invert Doppler spec‑ trum (or color scale)

Home Return to default settings for current exam type

Auto B-mode returns to de‑ fault preset gain. D-mode optimizes PRF (scale) and baseline. Long press activates Auto Gain

Split Screen Split screen so 2 views are displayed, or change which view is active Long press: Split screen off

Imaging Plane Change imaging plane on biplane and triplane transducers

Long press = press for 1–3 seconds. Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

7

Monitor Functionality Select transducer

Select exam type

Enter patient information

Pull here to enlarge image thumbnails

Document pane Click and drag to adjust focus area

Double-click or drag to enlarge and view captured image or clip

Click here to select a different brachy matrix or puncture guide

Puncture line

Image data shown here

Measurements shown here

Imaging Mode tabs

Workflow tabs

To minimize all tabs, click the workflow tab on top. To open again, click any tab.

8

To open a workflow tab that is not on top, click it.

Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

Start/stop imaging

Monitor Controls The Pro Package determines what tabs are available and which controls they contain. For example, the M-mode tab or 3D tab is available only when it is part of the selected Pro Package. Available controls depend on whether the image is scanning or frozen. Note: “Click a tab” means click the tab name.

Workflow Tabs Workflow tabs open automatically as needed. That way, only relevant controls are displayed. You can also open a tab manually to see its controls as described on page 8. “Freeze” toggles between Image and Measure and Mark tabs.

Imaging Mode Tabs Controls on the Image workflow tab are grouped on various Imaging Mode tabs. „ „ To start an imaging mode, click the tab while imaging. It opens so you can use the relevant controls. „ „ Click Image tab to display mode tabs on the top. In order to activate, click Unfreeze. „ „ Clicking the imaging mode tab on top turns off that imaging mode.

Visible Controls Tabs can be customized to include different controls, so your monitor may not look exactly like the one pictured. The bk3000/bk5000 Advanced User Guide contains information about customizing your setup.

Basic Tabs (Advanced Off)

Advanced Tabs (Advanced On)

Basic tabs contain the most often used con‑ trols.

To see and use all available controls for a work‑ flow tab, click Advanced.

Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

9

Basic Monitor Controls Key

Function/Note

3D

Turn on 3D imaging

Archive

Send to PACS (DICOM) or staging area for archive CD

Biopsy

Display puncture line or brachy matrix

Bodymark

Bodymark on image

Capture

Save image (if frozen) or clip (if imaging) to system hard disk

Copy

Copy to USB or CD/DVD

Depth -

Decrease max. tissue depth shown (increase magnification)

Depth +

Increase max. tissue depth shown (decrease magnification)

Dyn. Range

Adjust contrast

ETD

Enhanced Tissue Definition (reduce speckle)

Freeze/Unfreeze

Start/stop imaging

Freq

Change imaging frequency

Gain

Adjust gain of selected mode

Harmonic

Tissue harmonic imaging

L/R

Image orientation left/right

Pro Package

Select different Pro Package

Save...

Save setups

Scale

Adjust Color/Power/Doppler scale/PRF

Simultan

Both split-screen views imaging simultaneously (Color or Power mode in one view only)

Size

Image bigger or smaller

Split

Split screen into 2 views

U/D

Image orientation up/down

These are the controls needed for basic examinations. For information about other controls, see the bk3000/bk5000 Advanced User Guide.

10

Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

Your Custom Keys Key

Function/Note

Your Notes

Getting Started with bk3000 & bk5000 • 16-01254-EN-04 • October 2018

11

This Book is not a Complete User Guide Before you use the system, you must read the Safety chapter in the bk3000 & bk5000 User Guide. It contains safety information that is important for avoiding injury and for avoiding damage to the equipment. You must also read Care and Cleaning, which contains information about cleaning and disinfection as well as information about required inspections, calibration and maintenance. The bk3000/ bk5000 Advanced User Guide contains detailed information for the advanced user. bkmedical.com This guide is also available on the BK Medical website. Please go to the Customer Service section to download user manuals. If you have comments about the user documentation, please write to us at [email protected]. We would like to hear from you. © 2018 BK Medical Information in this document may be subject to change without notice.