Healthcare Products Catalogue
24 Pages
Preview
Page 1
INTRODUCTION A major medical product manufacturer since the 1920’s,
CONTENTS OXYGEN THERAPY
Comweld Medical designs and manufactures high profile
Ezi-Flow™ Flowmeter
2
healthcare products used extensively in Australian and
Gauge Flowmeter and Humidifier
3
overseas markets. Market leaders such as Oxy-Viva™
Series-O™ Regulators
4
Resuscitators, Twin-O-Vac™ Suction units, Series-O™
Multe-Flow™ Piston Regulators
5
Regulators and EZI-FLOW™ Flowmeters are some of the
Twin-O-Vac™ Multi Purpose Device
6
key medical products designed and manufactured by CIGWELD at the Preston, Victoria facility.
CIGWELD’s commitment to designing products that totally satisfy customer requirements is supported by state-of-theart facilities and technical expertise at its Australian
SUCTION Attachments
7
Suction Regulators
10
Accessory Products
11
headquarters. An accredited quality system to ISO9001, certified by Lloyd’s, ensures that the high standard of products and services is maintained.
Comweld Medical products have earned a strong reputation
EMERGENCY RESUSCITATION Oxy-Viva™ 3
12
R-Viva™
13
Demand Valves & Masks
15
throughout Australia and overseas for reliable performance, excellence in design, long life, quality and
ANALGESIC ADMINISTRATION SYSTEMS
16
durability.
OUTLET VALVES Customer needs are of paramount importance to Comweld
For Hospital Medical Gas Systems
18
Medical. All products are designed to meet the requirements of the customer and are supplied throughout Australia and overseas through an extensive distribution
GENERAL PRODUCTS Accessories & Spares
19
network. Access to spare parts, service and technical information is also readily available through this distribution network.
1
OXYGEN THERAPY FLOWMETERS EZI-FLOW FLOWMETERS Part No
Gas
Colour White
Rated Air Flow (l/min)
Inlet Pressure
Connections
0-15 l/min
400kPa
S.I.S Oxygen Handwheel
Inlet
Outlet
515800
Oxygen
Barbed Nipple or 1/4” BSP
515820
Medical Air
Black
0-15 l/min
400kPa
S.I.S Air Handwheel
Barbed Nipple or 1/4” BSP
515824
Oxygen
White
0-2.5 l/min
400kPa
S.I.S. Oxygen Handwheel
Barbed Nipple or 1/4” BSP
515852
Oxygen
White
0-15 l/min
400kPa
3/8 - 26 WHIT (F)
Barbed Nipple or 1/4” BSP
NOTE: S.I.S (Sleeve Indexed System Handwheel as per AS2896) ◆
◆ ◆ ◆ ◆ ◆ ◆ ◆
Provides an accuracy of +/- 5% (of full scale reading) and is pressure compensated to ensure that the flowmeter maintains its accuracy independent of varying gas supply pressures Flow limiting output orifice and fail safe shroud protects the patient from excessive flows in the event of excessive gas pressures Dual taper needle valve prevents damage to the seat and eventual leaks Gas specific inlet fitting to prevent connection to wrong gas type Colour coded inlet fittings, outlet fittings, and control knobs for quick recognition of the gas used by the flowmeter Incorporates durable impact resistant polycarbonate outer and metering tubes The flowtube design provides clear readability with large bold print lines and numbers providing 180˚ visibility Weighs approximately 300 grams
515800
2
Applications: The Ezi-Flow flowmeter is a pressure compensated flowmeter that delivers an accurate prescribed flow to the end user from the gas source. It is suitable for most types of respiratory therapy. Spare Parts: Spare Outlet Nut/Nipple, Oxygen (pk of 10) Part No. 515830 Spare Outlet Nut / Nipple, Air (pk of 10)
Part No. 515849
Shroud Kit
Part No. 301827
Control Knob Kit, Oxygen
Part No. 551129
Control Knob Kit, Air
Part No. 551120
515820
515824
OXYGEN THERAPY FLOWMETERS & HUMIDIFIERS GAUGE TYPE FLOWMETER Part No TM17
Gas Oxygen
Colour White
Rated Air Flow (l/min)
Inlet Pressure
0-14 l/min
400kPa
Connections Inlet
Outlet
S.I.S Oxygen Handwheel
Barbed Nipple or 1/4” BSP
NOTE: S.I.S (Sleeve Indexed System Handwheel as per AS2896) ◆ ◆ ◆ ◆ ◆ ◆
Applications: The Gauge Type Flowmeter is the ideal substitute when it is not possible to mount a ball or bobbin type flowmeter vertically. It delivers an accurate prescribed flow to the end user from the gas source and is suitable for most types of oxygen respiratory therapy.
Operates in any positional orientation Flow range of 0-14 l/min Reliable, accurate and durable Colour coded inlet fittings, outlet fittings, and control knobs prevent fitting to the wrong gas type Not pressure compensated Weighs approximately 400 grams
Spare Parts: Spare Outlet Nut / Nipple, Oxygen (pk of 10) Part No. 515830 Spare Flow Gauge
Part No. 551041
TM17
TM11 HUMIDIFIER Part No TM11
◆ ◆ ◆ ◆ ◆
Gas Oxygen
Water Capacity
Maximum Flow (l/min)
Pressure Relief Valve
200ml at max. fill level
16 l/min
35-100kPa @20 1/min
Pressure relief valve / alarm which operates if the therapy tubing or downstream accessories become obstructed Minimal maintenance required and is easily disassembled for cleaning and disinfecting Rugged construction makes this unit reliable and durable for years of constant use Couples directly to flowmeters Weighs approximately 500 grams
Connections Inlet
Outlet
1/4” BSP Female
Nipple to suit 5mm Oxygen Therapy Tubing
Applications: The TM11 Humidifier is a bubble through humidifier designed to humidify dry gases (ie. medical oxygen) as supplied from cylinders or pipeline systems before administration to the patient. Spare Parts: Spare Jar
Part No. 551054
Service Kit (inc. Diffuser, washer, O-ring) Part No. 551057
TM11 3
OXYGEN THERAPY REGULATORS SERIES-O REGULATORS Part No
Gas
Colour
Max. Outlet Pressure
Max. Rated Inlet Pressure
Connections Inlet
Outlet
518800
Oxygen
White
400kPa
20,000kPa@15˚C
Type 10 Bull Nosed with handwheel
S.I.S Sleeve
518804
Oxygen
White
400kPa
20,000kPa@15˚C
Pin Indexed Yoke (Fig.2)
S.I.S Sleeve
518808
Nitrous Oxide Blue
400kPa
20,000kPa@15˚C
Pin Indexed Yoke (Fig.6)
S.I.S Sleeve
518809
Medical Air
Black
400kPa
20,000kPa@15˚C
Pin Indexed Yoke (Fig.10)
S.I.S Sleeve
518810
Entonox
Blue/ (Oxygen/Nitrous Oxide) White
400kPa
20,000kPa@15˚C
Pin Indexed Yoke (Fig.11)
S.I.S Sleeve
518803
Oxygen
White
400kPa
20,000kPa@15˚C
Special for Oxy-Viva 3
Special
518895
Oxygen
White
400kPa
20,000kPa@15˚C
Type 10 Bull Nosed Vertical
S.I.S Sleeve
NOTE: S.I.S (Sleeve Indexed System as per AS2896). 20,000 kPa@15˚C equates to a pressure of 23,000kPa@65˚C. ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Encapsulated Seat Technology (EST) ensures superior performance, accuracy and resistance to ‘surging’ Large diameter diaphragm gives a performance that is normally only found in double stage regulators Triple filter system increases the regulator performance by preventing foreign particles from getting in contact with the high pressure gas or the regulator seat No tools are required to routinely disconnect the regulator from the cylinder valve A safety relief valve is built in to the regulator to protect staff and patients in the event of high pressure failures Tamper resistant design to ensure only qualified personnel can access the regulator Colour coded pressure gauges and identification labels for quick recognition of the gas used by the regulator Gas specific inlet fittings and outlet fittings to prevent fitting to the wrong gas type Weighs approximately 920 grams
518800
518895
4
Applications: The Series-O regulator has been the industry leader for regulators in Australia for years. The simple but effective design and ease of use make this single stage regulator a very low maintenance yet high performing product: one that can be used in a variety of environments. Spare Parts: Spare Bodok Seals (pack of 10)
Part No. 551022
Spare Gauge Oxygen
Part No. 551045
Spare Gauge Air
Part No. 551044
Spare Gauge Nitrous Oxide
Part No. 551043
Spare Gauge Plain
Part No. 551042
Spare Inlet Filter (pack of 10)
Part No. 551024
Spare Type 10 inlet o-ring
Part No. 301073
518804
518808
518809
518810
OXYGEN THERAPY REGULATORS MULTE-FLOW PISTON REGULATORS Part No
Gas
Oxy Therapy Outlet Flow Settings
Max. Outlet Rated Inlet Pressure Pressure
Connections Inlet
Outlet
551153
Oxygen
2 Settings: 8 & 15 l/min
–
20000kPa@15˚C
Pin Indexed Yoke (Fig.2)
Barbed Nipple
551155
Oxygen
10 Settings: 1,2,3,4 5,6,7,8,10 & 15 l/min
–
20000kPa@15˚C
Pin Indexed Yoke (Fig.2)
Barbed Nipple
551157
Oxygen
10 Settings: 2,3,4,5 6,8,9,10, 15 & 25 l/min
400kPa
20000kPa@15˚C
Pin Indexed Yoke (Fig.2)
Barbed Nipple and S.I.S Sleeves
551158
Oxygen
2 Settings: 8 & 15 l/min
400kPa
20000kPa@15˚C
Pin Indexed Yoke (Fig.2)
Barbed Nipple and S.I.S Sleeves
NOTE: S.I.S (Sleeve Indexed System as per AS2896) Applications: The Multe-Flow Piston Regulator offers superior safety and performance in a lightweight and compact design. With four different models available this range of regulators should cover most of your resuscitation or oxygen therapy applications. Spare Parts: Spare Cylinder Key Spanner
Part No. 551162
Spare Yoke Wingscrew
Part No. 551166
Spare Gauge Oxygen
Part No. 551169
Spare Therapy Outlet Nipple
Part No. 551174
Spare SIS Oxygen Outlet
Part No. 551175
◆
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
With Shok-Guard™ system that reduces the chances of an oxygen ignition in the regulator. The unique diffuser and filter system prevents entry of unwanted contamination which reduces the effects of sudden temperature rise of the oxygen in the regulator as the cylinder valve is opened All brass design for the oxygen flow path provides optimum safety and resilience even in the harshest operating conditions Oxygen Therapy and Resuscitation models Offers a variety of oxygen therapy flow options suitable for most applications Swivel yoke allows preferred positioning of gauge and control knob when assembled to a cylinder Built in pressure relief valve to prevent over pressure conditions from occurring 2 Self sealing S.I.S outlet connections on the 551157 & 551158 models allow equipment to be attached or removed without the need to turn off the oxygen Easy to read cylinder contents gauge and contoured flow selector Chrome plated for easy cleaning and professional looking finish Gas specific inlet fittings and outlet fittings to prevent fitting to the wrong gas type Regulator comes with cylinder key attached as standard Weighs approximately 700 grams (551157 & 551158) or 600 grams (551153 & 551155)
551153
551157
5
OXYGEN THERAPY TWIN-O-VAC TWIN-O-VAC MULTI-PURPOSE DEVICE Part No
Gas
Inlet Pressure
Negative Pressure at Maximum Setting
Free Air Displaced
Gas Consumed
Connections Inlet
Outlet
TM117G
Oxygen
400kPa
400mmHg
16 l/min
22 l/min
S.I.S Oxygen Handwheel
S.I.S Sleeve
518632
Oxygen
400kPa
150-200mmHg
16 l/min
22 l/min
S.I.S Oxygen Handwheel
S.I.S Sleeve
TM118
Oxygen
50Psi
350mmHg
14 l/min
20 l/min
D.I.S.S Oxygen Handwheel
D.I.S.S
518633
Oxygen
50Psi
150-200mmHg
14 l/min
20 l/min
D.I.S.S Oxygen Handwheel
D.I.S.S
NOTE: S.I.S (Sleeve Indexed System Handwheel as per AS2896); D.I.S.S (Diameter Indexed Safety System as per CGA V-5) ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
◆ ◆
The light weight of the unit makes it easy to handle and lightens the load on pipeline outlets and regulators Only three moving parts in the main control head Reliable and durable Standard millipore brand filter acts as a bacteria filter between the jar contents and room air Adjustable suction control allows the suction level to be set and monitored Easy to read dual scale (kPa and mmHg) vacuum gauge Colour coded pressure gauges and identification labels for quick recognition of the gas used by the regulator Gas specific inlet fittings and outlet fittings to prevent fitting to the wrong gas type Suction outlet connection is a nominal 8mm I.D. tubing nipple Twin-O-Vac (p/n TM117G & p/n TM118) Gauge range is 0 to -100 kPa Twin-O-Vac (p/n 518632 & 518633) Gauge range is 0 to -25 kPa Receiver Jar capacity of 400 ml Weighs approximately 720 grams
Applications: The Twin-O-Vac is a low cost versatile unit that is ideal when extra or portable sources of oxygen or suction are required. Each Twin-O-Vac uses one oxygen outlet (ie. An oxygen pipeline wall point or cylinder regulator) to provide variable suction plus two separate sources of oxygen. All three outlets can be used simultaneously on up to three different patients if necessary. The Twin-O-Vac can be connected or linked to an assortment of equipment including resuscitators, flowmeters, infant warmers and humidifiers. Common areas of use are general wards, transporting patients, emergency wards, ambulances, portable resuscitation kits, and paediatric wards. Spare Parts: Spare Receiver Jar, 400ml
Part No. 554024
Spare Bacteria Filter (pack of 100)
Part No. 554050
Spare Vacuum Gauge, 0 to -100 kPa
Part No. 552501
Service Kit
Part No. 515754
TM117G
6
SUCTION SUCTION ATTACHMENTS COMWELD SUCTION ATTACHMENTS - Central Vacuum Part No
Colour
Gauge Range
Connections Inlet
Outlet
554006
Yellow
0 to -100 kPa
S.I.S Vacuum Handwheel
Nozzle to suit 8mm I.D. Tubing
554007
Yellow
N/A
S.I.S Vacuum Handwheel
Nozzle to suit 8mm I.D. Tubing
NOTE: S.I.S (Sleeve Indexed System Handwheel as per AS2896) ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Designed to suit a Central Vacuum system Horizontal positioning of connector and gauge to the suction nozzle, for wall mounting On / Off control tap Suction nozzle and filter are fitted as standard and are also available as spare parts Easy to read dual scale (kPa and mmHg) vacuum gauge (applicable models) Colour coded pressure gauges and identification labels for quick recognition of the gas / function of the product Gas specific inlet fittings to prevent fitting to the wrong gas service Suction outlet connection is a nominal 8mm I.D. tubing nipple Gauge range is 0 to -100 kPa Weighs approximately 500 grams
Applications: These Comweld Suction Attachments are a basic connector with no controls other than an On/Off tap. They simply serve as the adaptor between the suction performance of the pipeline outlet / central suction system and the receiver jar assemblies (or other suction collection apparatus being used). Spare Parts: Spare Sintered Filter
Part No. WA185
Spare Outlet Nozzle/Filter Holder
Part No. 518634
Spare Vacuum Gauge (0 to -100 kPa)
Part No. 522501
Spare O-ring (for outlet nozzle)
Part No. 7964024
WA185
518634
554006
554007
7
SUCTION SUCTION ATTACHMENTS COMWELD SUCTION ATTACHMENTS - Venturi Suction Part No
Colour
Gauge Range
Connections Inlet
Outlet
554013
Yellow
0 to -100 kPa
S.I.S Vacuum Handwheel
Nozzle to suit 8mm I.D. Tubing
554010
Yellow
N/A
S.I.S Vacuum Handwheel
Nozzle to suit 8mm I.D. Tubing
NOTE: S.I.S (Sleeve Indexed System Handwheel as per AS2896) ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Designed to suit a Venturi Suction system Non-return valve Horizontal positioning of connector and gauge to the suction nozzle, for wall mounting Suction nozzle and filter are fitted as standard and are also available as spare parts Easy to read dual scale (kPa and mmHg) vacuum gauge (applicable models) Colour coded pressure gauges and identification labels for quick recognition of the gas / function of the product Gas specific inlet fittings to prevent fitting to the wrong gas service Suction outlet connection is a nominal 8mm I.D. tubing nipple Gauge range is 0 to -100 kPa Weighs approximately 400 grams
554013
8
Applications: These Comweld Suction Attachments are a basic connector with no controls. They simply serve as the adaptor between the suction performance of the venturi pipeline outlet and the receiver jar assemblies (or other suction collection apparatus being used). Spare Parts: Spare Sintered Filter
Part No. WA185
Spare Outlet Nozzle/Filter Holder
Part No. 518634
Spare Vacuum Gauge (0 to -100 kPa)
Part No. 522501
Spare O-ring (for outlet nozzle)
Part No. 7964024
554010
SUCTION SUCTION ATTACHMENTS COMWELD LOW SUCTION ATTACHMENTS - Venturi Suction Part No
Colour
Gauge Range
Connections Inlet
518535
Yellow
0 to -25 kPa
S.I.S Vacuum Handwheel
Outlet Nozzle to suit 8mm I.D. Tubing
NOTE: S.I.S (Sleeve Indexed System Handwheel as per AS2896) ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Designed to suit a Venturi Suction system Safety valve designed to prevent negative pressures greater than -25 kPa being supplied Easy to read dual scale (kPa and mmHg) vacuum gauge which gives clear indication of low pressures Non Return Valve which prevents any positive pressure being applied should a fault occur in the suction source A positive pressure relief valve within the patient circuit for additional safety Horizontal positioning of connector and gauge to the suction nozzle, for wall mounting Suction nozzle and filter are fitted as standard and are also available as spare parts Colour coded pressure gauges and identification labels for quick recognition of the gas / function of the product Gas specific inlet fittings to prevent fitting to the wrong gas service Suction outlet connection is a nominal 8mm I.D. tubing nipple Gauge range is 0 to -25 kPa Weighs approximately 500 grams
Applications: This Comweld Suction Attachments is a basic connector with no controls. It serves as a low suction adaptor between the venturi pipeline outlet and the receiver jar assemblies (or other suction collection apparatus being used). This unit is designed to keep the suction performance of the pipeline outlet to a lower level than normal, for more specific low suction applications. Spare Parts: Spare Sintered Filter
Part No. WA185
Spare Outlet Nozzle/Filter Holder
Part No. 518634
Spare O-ring (for outlet nozzle)
Part No. 7964024
518535
9
SUCTION SUCTION REGULATORS VACUTRON SUCTION REGULATORS Part No
Selector Switch Modes avail.
Source Vacuum
Regulated Vacuum
Maximum Flow
Gauge Range
Inlet
Connections Outlet
554067
Regulated / Off
305-760 mmHg
0-220 mmHg
80 l/min*
0 to -300 mmHg
S.I.S Vacuum Handwheel
Nozzle to suit 8mm I.D. tubing
554068
Full / Regulated / Off
305-760 mmHg
Max available
80 l/min*
0 to -760 mmHg
S.I.S Vacuum Handwheel
Nozzle to suit 8mm I.D. tubing
NOTE: S.I.S (Sleeve Indexed System Handwheel as per AS2896) *Maximum flow is affected by the performance of the vacuum supply source ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Easy access On / Off selector knob (with full line capability on the high vacuum model) Reliable and durable Slim line design that saves space Adjustable control knob allows the suction level to be set and monitored Easy to read vacuum gauge Gas specific inlet fittings to prevent fitting to the wrong gas service Suction outlet connection is a nominal 8mm I.D. tubing nipple Suction nozzle and filter are fitted as standard and are also available as spare parts Weighs approximately 675 grams
554067
10
Applications: The Vacutron range of suction regulators are specifically designed for general patient care. They are designed to control the vacuum level provided by a central suction source. This is then used in conjunction with a collection jar system between the regulator and the patient. Spare Parts: Spare Sintered Filter
Part No. WA185
Spare Outlet Nozzle/Filter Holder
Part No. 518634
Spare O-ring (for outlet nozzle)
Part No. 7964024
554068
SUCTION SUCTION ACCESSORIES SUCTION TRAP JAR Part No
Colour
Capacity
Connections Inlet
518607
Yellow
400 ml
Outlet
S.I.S Vacuum Handwheel
Nipple to suit 8mm I.D. Tubing
NOTE: S.I.S (Sleeve Indexed System Handwheel as per AS2896) Applications: The Suction Trap Jar unit is simply a suction receiver device, suitable for applications where smaller volumes of suction material are to be collected. With an on / off valve incorporated it simply serves as the receiver device for the suction performance of the pipeline outlet / suction system. Spare Parts: Spare Receiver Jar, 400ml
Part No. 554024
Spare Vacuum Gauge (optional) O to -100 kPa Part No. 522501 ◆ ◆ ◆ ◆ ◆ ◆ ◆
On / off control valve Non-return valve if used on Venturi Suction systems Fitted with a clip to hold the suction catheter A plugged socket is provided to accept an optional vacuum gauge Gas specific inlet fittings to prevent fitting to the wrong gas service Suction outlet connection is a nominal 8mm I.D. tubing nipple Weighs approximately 450 grams
518607
STATVAC SUCTION ASPIRATOR (O-TWO SYSTEMS Model) Part No
554052
Driving Gas
Inlet Pressure
Negative Pressure at Maximum Setting
Free Air Displaced
Inlet
Connections Outlet
Oxygen
400kPa (+/– 15%)
300mmHg (+/– 10%)
30 l/min (+/– 15%)
9/16”–18 D.I.S.S.
Barbed nipple to suit suction tubing
NOTE: D.I.S.S. (Diameter Indexed Safety System as per CGA V-5) Applications: The Statvac II Aspirator is a fast, effective and lightweight suction unit that is ideal in emergency situations where portable sources of suction are required, in particular for suctioning out excessive quantities of fluid / particles from a patient’s mouth. The most common area of use is in portable resuscitation kits. ◆ ◆ ◆ ◆ ◆ ◆
The lightweight of the unit makes it easy to handle and lightens the load on resuscitation kits Reliable and durable Unique on / off shuttle that controls the suction flow quickly and effectively in an emergency situation Suction outlet connection is suitable for standard suction tubing Receiver Jar capacity of 140 ml Weighs approximately 300 grams
554052
11
RESUSCITATION RESUSCITATION KITS OXY-VIVA 3 RESUSCITATOR ◆ ◆ ◆ ◆ ◆
◆ ◆ ◆ ◆
Simple, rugged and highly portable in a stainless steel case Storage compartment to store and protect your systems components Simple design for ease of serviceability Oxygen Demand Valve Resuscitator provides a resuscitation flowrate of 40-60 l/min and a demand flowrate of 0-160 l/min Suction attachment provides a static vacuum of -60kPa (-450mmHg) and a suction flow of 40 l/min free air minimum. With a 250ml trap jar and a nipple to suit 8mm suction tubing Pin indexed yoke (Fig.2) gas inlet connection as well as an auxiliary inlet / outlet low pressure oxygen connection Therapy flow attachment offering a fixed flowrate of 8 l/min with an on / off lever and nipple to suit 5mm therapy tubing Weighs approximately 6.5kg without a cylinder fitted (approximately 10kg with cylinder fitted) Dimensions are 57 x 18 x 30cm
Ordering Information: Oxy-Viva 3 Resuscitator with Demand Valve
Part No. 552090
Applications: The Oxy-Viva 3 Resuscitator provides the benefits of resuscitation, suction and oxygen therapy all in the one compact unit. Operating off a 400 litre (C-size) oxygen cylinder, these three different treatment modes can be used simultaneously or separately for almost any emergency situation. The Oxy-Viva 3 contains equipment to suit an enhanced level of resuscitation training. The system gives you increased flexibility with a gas powered oxygen demand valve resuscitator, a suction attachment with collection jar, a fixed flow oxygen therapy attachment and auxiliary inlet/outlet connection. Spare Parts: Resuscitation Mask, Adult, Size 5
Part No. 515743
Resuscitation Mask, Child, Size 3
Part No. 515744
Spare Bodok Seals for cylinder (pk of 10) Part No. 551022 Service Kit
Part No. 518092
Spare Regulator Inlet Filter (pack of 10) Part No. 551024
552090 (cylinder not included)
12
RESUSCITATION RESUSCITATION KITS R-VIVA EMERGENCY RESUSCITATOR ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Simple, lightweight and resilient Plenty of extra storage pockets to store and protect your systems components Basic kit design allows for easy addition of other accessories or components Oxygen Demand Valve Resuscitator provides a resuscitation flowrate of 40-60 l/min and a demand flowrate of 0-160 l/min Suction unit provides a static vacuum of -300mmHg, with a 30 l/min maximum developed suction. With a 140ml trap jar and a nipple to suit 8mm suction tubing Pin indexed yoke (Fig.2) gas inlet connection Therapy flow attachment offering a fixed flowrate of 8 l/min or 15 l/min with a nipple to suit 5mm therapy tubing R-Viva bag made of Fabrec 1000 Denier material Weighs approximately 4kg without a cylinder fitted (approximately 7kg with cylinder fitted) Dimensions are 64 x 28 x 25cm
Ordering Information: R-Viva Resuscitator with Demand valve & Suction unit
Part No. 552160
Applications: The R-Viva Emergency Resuscitator is designed for the professional rescuer. The main component of the kit is the Multe-Flow piston regulator. This regulator has two oxygen outlets to run both the Comweld Demand Valve Resuscitator and Suction unit as well as oxygen therapy selector with two flow settings. This means that the complete kit can provide benefits of resuscitation, suction and oxygen therapy from the one compact unit. Operating off a 400 litre (C-size) oxygen cylinder, these three different treatment modes can be used simultaneously or separately for almost any emergency situation. Spare Parts: Resuscitation Mask, Adult, Size 5
Part No. 515743
Resuscitation Mask, Child, Size 3
Part No. 515744
Oxygen Demand Valve Resuscitator
Part No. 552095
Oxygen Supply Hose for Demand Valve Resuscitator or Suction unit
Part No. 552086
Comweld Suction Unit
Part No. 554052
Spare Bodok Seals for cylinder (pk of 10) Part No. 551022
552160 (Cylinder not included)
13
RESUSCITATION RESUSCITATION KITS R-VIVA OXYGEN THERAPY KIT ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Simple, lightweight and resilient Comfortable carry handle and shoulder strap Stretcher attachment straps to secure the unit during transportation Internal pocket space External velcro strips for the attachment of an additional pouch, if necessary Non slip cylinder holder Clear viewing window allows a direct view of the cylinder contents gauge and flow setting when in use Therapy flow control offering ten flow selections at flowrates of 1,2,3,4,5,6,7,8,10 and 15 l/min and a nipple to suit 5mm therapy tubing R-Viva bag made of Fabrec 1000 Denier material Weighs approximately 1.5kg without a cylinder fitted (approximately 4.5kg with cylinder fitted) Dimensions are 55 x 28 x 15cm
Ordering Information: R-Viva Oxygen Therapy Kit
Part No. 552162
Applications: The R-Viva Oxygen Therapy kit is ideal for use in private residences, workplaces and elderly citizens homes for the supply of oxygen. The main component of the kit is the MulteFlow piston regulator, which has an oxygen therapy selector with ten flow settings. Operating off a 400 litre (C-size) oxygen cylinder this kit is great for almost any oxygen therapy requirement. The inclusion of a mouth to mask system for emergency resuscitation situation adds to this units versatility. Spare Parts: Resuscitation Mask, Adult, Size 5
Part No. 515743
Resuscitation Mask, Child, Size 3
Part No. 515744
Spare Bodok Seals for cylinder
Part No. 551022
552162 (Cylinder not included)
14
RESUSCITATION DEMAND VALVES & MASKS OXYGEN DEMAND VALVE RESUSCITATOR SPECIFICATIONS Manual Flowrate:
Supply Pressure:
Inlet Connection:
40 – 60 l/min
400 kPa nominal
9/16” – 18 D.I.S.S.
Demand Flowrate:
Pressure Relief Valve:
Patient Connection:
0 – 160 l/min
54 – 60 cmH2O
22 /15 mm male / female taper
Demand Flow Triggering System:
Exhalation Resistance:
Weight:
-5 cmH2O @ 100 l/min, maximum
-5 cmH2O @ 50 l/min, maximum
230 grams
NOTE: D.I.S.S. (Diameter Indexed Safety System as per CGA V-5) ◆ ◆ ◆ ◆
Safe and effective means of delivering oxygen Can be used as a demand valve resuscitator or as a standard demand valve Integral pressure relief valve Can be attached to any standard 400 kPa oxygen outlet, including: hospital outlet valves, regulators, or Twin-O-Vacs
Ordering Information: Oxygen Demand Valve Resuscitator
Part No. 552095
Applications: The Demand Valve Resuscitator provides a safe and effective means of delivering an oxygen concentration to ventilate nonbreathing or respiratory distressed patients. The unit can also be used as a standard Demand Valve to deliver oxygen to spontaneously breathing patients upon demand. The unit is simple, compact and always ready for instant use and attaches to any standard 400 kPa oxygen outlet. Spare Parts: Spare Diaphragm Valve
Part No. 552082
Spare Patient Valve Assembly
Part No. 552083
Oxygen Hose Assembly, 2 mtr D.I.S.S – S.I.S connections
Part No. 552086
552095
552086
552082
552083
RESUSCITATION MASKS These adult and child masks feature an integral cuff and shell and are designed to help you in emergency situations when spontaneous breathing has ceased. They have a soft cushion and clear shell giving you both an effective seal and easy visibility of the patient’s face and lips.
Ordering Information: Resuscitation Mask, Adult, Size 5 Resuscitation Mask, Child, Size 3
Part No. 515743 Part No. 515744
515743
515744
15
ANALGESIC SYSTEMS ANALGESIC ADMINISTRATION SYSTEM SPECIFICATIONS Demand Flowrate:
Exhalation Resistance:
Weight:
0 – 160 l/min
-5 cmH2O @ 50 l/min, maximum
230 grams
Demand Flow Triggering Pressure:
Inlet Connection:
Gas:
-5 cmH2O @ 100 l/min, maximum
5/8” – 18 UN
50% Nitrous Oxide & 50% Oxygen
Supply Pressure:
Patient Connection:
premixed gas
400 kPa nominal
22 /15 mm male / female taper
◆ ◆ ◆ ◆ ◆
Safe and effective means of delivering analgesic gas mixture System contains the reliable Series-O Regulator and a reinforced supply hose in addition to the demand valve and the mask Demand valve delivers high flow rates with low triggering pressures reducing the amount of effort required from the patient to maintain the flow Can be attached to any standard 400 kPa entonox outlet, including: hospital outlet valves and regulators Demand valve incorporates a 360˚ patient valve swivel housing
Ordering Information: Analgesic Administration System Part No. 550010 (inc. Regulator, Demand Valve, Hose Assembly, Mask and Bleed Pin) Applications: The Analgesic Administration System is a demand inhalation unit for the administration of 50% Nitrous Oxide / 50% Oxygen (Entonox) analgesic gas mixture. The unit is specifically designed for use in emergency and obstetric analgesia. It is ideal for the relief of pain in a range of situations, including: • transport accident victims • accident and emergency wards • childbirth • minor surgical procedures such as changing dressings, removing sutures, reduction of fractures Spare Parts: Spare Diaphragm Valve
Part No. 552082
Spare Patient Valve Assembly
Part No. 552083
552082
550010
16
552083
ANALGESIC SYSTEMS MIDOGAS ANALGESIC SYSTEM ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Safe and effective means of delivering analgesic gas mixture Demand valve feature operates on a minimum patient inspiration Gas flow ceases automatically at the end of patient inspiration Safety locked at a minimum of 25% oxygen Emergency oxygen delivering feature Audible whistle and delivery of air in the unlikely event of oxygen failure Clear to read Oxygen / Nitrous Oxide scale On / off rotating switch, which controls the supply of both gases Low resistance expiratory valve ensures patient comfort
Ordering Information: Midogas Analgesic System
Part No. MA139
Applications: The Midogas Analgesic System is a demand inhalation unit for the administration of a variable analgesic gas mixture of Nitrous Oxide & Oxygen. Proving it’s durability and popularity over many years, the Midogas unit is highly effective and ideal for the relief of pain in a range of situations such as obstetrics, minor surgery, burn dressing, and emergency accident victims. Contents: The Midogas Analgesic unit, Wall model (p/no. MA139) consists of: ◆ Midogas Unit ◆ Handpiece ◆ Adult Mask Size 5 ◆ Antistatic Corrugated Tube (1 mtr) ◆ Antistatic Tube Adaptor ◆ Oxygen Hose Assy (2 mtrs) ◆ Nitrous Oxide Hose Assy (2 mtrs) ◆ Wall mounting bracket
MA139
17
HOSPITAL GAS SYSTEMS MULTEPOINT TERMINAL WALL OUTLETS Part No.
Gas
Colour
Connection Mode
Outlet Connection
553040
Oxygen
White
Screw type / Single action
S.I.S Sleeve
553041
Medical Air
Black
Screw type / Single action
S.I.S Sleeve
553042
Nitrous Oxide
Blue
Screw type / Single action
S.I.S Sleeve
553042
Direct Suction
Yellow
Screw type / Single action
S.I.S Sleeve
553044
Venturi Suction
Yellow
Screw type / Single action
S.I.S Sleeve
553045
Direct Scavenge
Beige
Screw type / Single action
S.I.S Sleeve
553046
Venturi Scavenge
Beige
Screw type / Single action
S.I.S Sleeve
553047
Surgical Tools
Aqua
Screw type / Single action
S.I.S Sleeve
553048
Entonox
Blue/White
Screw type / Single action
S.I.S Sleeve
518900
Oxygen
White
Screw & Quick connect type / Dual action
S.I.S Sleeve
518901
Medical Air
Black
Screw & Quick connect type / Dual action
S.I.S Sleeve
518902
Nitrous Oxide
Blue
Screw & Quick connect type / Dual action
S.I.S Sleeve
518903
Direct Suction
Yellow
Screw & Quick connect type / Dual action
S.I.S Sleeve
NOTE: S.I.S. (Sleeve Indexed Safety System as per AS2896) ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
High quality performance and reliability Available in a range of gases and suction services Unique gas specific diameter indexing system prevents incorrect assembly of units on installation or when dismantled for maintenance High flow capability Quick connect or screw type models available Minimum parts for simplicity and lower maintenance costs Highly visible colour coded name plates make it easy to identify the gas or suction service Suits various installation requirements – wall, pendant, column or duct mounting Gas supply tube can be positioned either up or down to suit installation (MK 3 models only)
Applications: The Multepoint 3 ranges of terminal wall outlets are designed for hospital gas systems. This series of model continues the tradition for high quality, performance and reliability of the Multepoint name. Accessories: Oxygen Handwheel Kit
Part No. 518406
Air Handwheel Kit
Part No. 518405
Nitrous Oxide Handwheel Kit
Part No. 518407
ABOVE: Multepoint Single Action
LEFT: Multepoint Dual Action
18
MISCELLANEOUS ACCESSORIES & SPARES 3 WAY ADAPTORS Extends the use of a single gas outlet to enable two gas hoses or two pieces of equipment to be used simultaneously. All connections coded and self sealing. Ordering Information: Oxygen 3 Way Adaptor Air 3 Way Adaptor Nitrous Oxide 3 Way Adaptor 551140
551142
Part No. 551140 Part No. 551141 Part No. 551142
551141
HOSE ASSEMBLIES Ready to use gas supply hoses consisting of 4 metres of tubing fitted with colour coded, non interchangeable handwheels. Ordering Information: Oxygen Hose Assembly Air Hose Assembly Nitrous Oxide Hose Assembly
Part No. MA164 Part No. MA165 Part No. MA166
Ordering Information: Oxygen Handwheel Kit Air Handwheel Kit Nitrous Oxide Handwheel Kit
Part No. 518406 Part No. 518405 Part No. 518407
MA164
HANDWHEEL KITS Each kit contains a colour coded noninterchangeable handwheel plus three different sized nipples (5mm, 1/4”, 8mm), O-rings, O-clips and plastic shrink sleeve.
518405
518406
518407
GAUGE Ordering Information: Contents Gauge, Plain, 30000 kPa, Series-O Regulator Contents Gauge,Nitrous Oxide, 20000 kPa, Series-O Regulator Contents Gauge, Air, 30000 kPa, Series-O Regulator Contents Gauge, Oxygen, 30000 kPa, Series-O Regulator Flow Gauge, Vacuum, -100kPa, Twin-O-Vac & Suction Attachments Flow Gauge, Oxygen, 0–14 l/min, TM17 Flowmeter
Part No. 551042 Part No. 551043 Part No. 551044 Part No. 551045 Part No. 552501 Part No. 551041
522501 19
MISCELLANEOUS ACCESSORIES & SPARES CYLINDER KEYWHEEL OR SPANNER A keywheel or spanner design product to turn medical gas cylinders on and off with a minimum of effort. Ordering Information: Cylinder Keywheel Cylinder Spanner
Part No. 511956 Part No. 551162
551162
511956
FLOWMETER NUT / NIPPLES (Packet of 10) Suits Ezi-Flow and TM style flowmeters Ordering Information: Oxygen Nut / Nipples (pack of 10) Part No. 515830 Air Nut / Nipples (pack of 10) Part No. 515849
515830
515849
BODOK SEALS (Packet of 10) Suits Series-O regulators or any equipment with pin indexed yoke inlet fittings for medical gas cylinders. Ordering Information: Bodok Seals (Packet of 10)
Part No. 551022
551022
BACTERIA FILTERS (Packet of 100) Spare filters for all Twin-O-Vac units. Ordering Information: Bacteria Filters (Packet of 100)
554050
20
Part No. 554050