LOGIQ e Basic Service Manual Rev10 Sept 2018

Product Information This Manual covers the software version of R8.x.x, R9.x.x for LOGIQ e and LOGIQ e NextGen (Manufactured in USA, only available in China market) ultrasound system.

GE

Copyright © 2015-2018, General Electric Company. GE Medical Systems, a General Electric Company, going to market as GE Manufacturer: GE Medical Systems (China) Co., Ltd. No. 19, Changjiang Road WuXi National Hi-Tech Development Zone Jiangsu, P.R. China 214028 TEL: +86 510 85225888; FAX: +86 510 85226688 www.gehealthcare.com

Revision history Revision History DATE (YYYY/MM/DD)

REV

REASON FOR CHANGE

Rev.1

2015/03/10

Initial Release

Rev.2

2015/06/05

Add software wiping information

Rev.3

2015/08/28

Update spare part list

Rev.4

2016/02/29

• Add UDI upgrade label • Update software wiping information • Update software upgrade information

Rev.5

2016/04/27

Update spare part list

Rev.6

2016/08/25

Update software application USB

Rev.7

2016/11/30

Update spare part list and safety test frequency

Rev.8

2017/08/25

Update table of Accessories and Kits

Rev.9

2018/03/12

Add information of LOGIQ e NextGen

Rev.10

2018/09/05

Update battery description and hardware description

List of Effected Pages (LOEP) Chapter Number

Revision

Chapter Number

Revision

Front

Rev. 10

Chapter 7

Rev. 10

Front matter

Rev. 10

Chapter 8

Rev. 10

TOC

Rev. 10

Chapter 9

Rev. 10

Chapter 1

Rev. 10

Chapter 10

Rev. 10

Chapter 2

Rev. 10

Chapter 11

Rev. 10

Chapter 3

Rev. 10

Chapter 12

Rev. 10

Chapter 4

Rev. 10

Index

Rev. 10

Chapter 5

Rev. 10

Rear Cover

Rev. 10

Chapter 6

Rev. 10

Please verify that you are using the latest revision of this document. Information pertaining to this document is maintained on MyWorkshop/ePDM (GE electronic Product Data Management). If you need to know the latest revision, contact your distributor, local GE Sales Representative or in the USA call the GE Ultrasound Clinical Answer Center at 1 800 682 5327 or 1 262 524 5698.

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

i-1

Important precautions

Translation policy

i-2

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

i-3

i-4

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

i-5

i-6

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

i-7

i-8

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

i-9

i-10

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

i-11

i-12

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

i-13

i-14

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

Damage in transportation All packages should be closely examined at time of delivery. If damage is apparent, write “Damage In Shipment” on ALL copies of the freight or express bill BEFORE delivery is accepted or “signed for” by a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the contents and containers held for inspection by the carrier. A transportation company will not pay a claim for damage if an inspection is not requested within this 14 day period.

Certified electrical contractor statement - For USA Only All electrical Installations that are preliminary to positioning of the equipment at the site prepared for the equipment shall be performed by licensed electrical contractors. Other connections between pieces of electrical equipment, calibrations and testing shall be performed by qualified GE personnel. In performing all electrical work on these products, GE will use its own specially trained field engineers. All of GE’s electrical work on these products will comply with the requirements of the applicable electrical codes. The purchaser of GE equipment shall only utilize qualified personnel (i.e., GE’s field engineers, personnel of third-party service companies with equivalent training, or licensed electricians) to perform electrical servicing on the equipment.

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

i-15

Omission and errors If there are any omissions, errors or suggestions for improving this documentation, contact the GE Global Documentation Group with specific information listing the system type, manual title, part number, revision number, page number and suggestion details. Mail the information to:

GE Medical Systems (China) Co., Ltd. No. 19 Changjiang Road Wuxi National Hi-Tech Dev. Zone Jiangsu P.R.China 214028 GE employees should use TrackWise to report service documentation issues. These issues will then be in the internal problem reporting tool and communicated to the writer.

i-16

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

Service Safety Considerations DANGER

WARNING

DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT IN THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING AND ADJUSTING. Use all Personal Protection Equipment (PPE) such as gloves, safety shoes, safety glasses, and kneeling pad, to reduce the risk of injury. For a complete review of all safety requirements, refer to Chapter 1 in the Service Manual.

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10

i-17

Legal notes The contents of this publication may not be copied or duplicated in any form, in whole or in part, without prior written permission of GE. GE may revise this publication from time to time without written notice.

Proprietary to GE Permission to use this Advanced Service Software and related documentation (herein called the material) by persons other than GE employees is provided only under an Advanced Service Package License relating specifically to this Proprietary Material. This is a different agreement from the one under which operating and basic service software is licensed. A license to use operating or basic service software does not extend to or cover this software or related documentation. If you are a GE employee or a customer who has entered into such a license agreement with GE to use this proprietary software, you are authorized to use this Material according to the conditions stated in your license agreement. However, you do not have the permission of GE to alter, decompose or reverse-assemble the software, and unless you are a GE employee, you may not copy the Material. The Material is protected by Copyright and Trade Secret laws; the violation of which can result in civil damages and criminal prosecution. If you are not party to such a license agreement or a GE Employee, you must exit this Material now.

Trademarks All products and their name brands are trademarks of their respective holders.

Copyrights All Material Copyright © 2015-2018 by General Electric Company Inc. All Rights Reserved.

i-18

LOGIQ e – Basic Service Manual 5561650-100 English Rev. 10