Quick Reference Guide
8 Pages
Preview
Page 1
Note: The DPM5 Quick Reference Guide is not intended as a replacement to the Operating Instructions. Prior to operating equipment, the user must be familiar with the Operating Instructions Manual contents. This document is a guideline only to be used as an aid to comprehensive Inservice Training.
Mindray DS USA, Inc. 800 MacArthur Blvd., Mahwah, NJ 07430 Tel: 1.800.288.2121 or 201.995.8000 www.na.mindray.com P/N: 046-003724-00 Rev A
Table of Contents Overview... 1 Admit a Patient without Patient Information... 2 Removing aCleaning Plug from SpO2 Module... 1 Discharge Patient... 2 Enabling SpO2 module... 1 Set a NIBPthe Interval... 2 Installing SpO Set Alarmthe Limits ... 3 2 patient cable and sensor... 2 Displaying the SpO2 waveform... 2 Set Screen Configuration (Standard, Trends, OxyCRG, or Large Fonts)... 3 Printing Real Time SpO2 Waveform... 3 Change Waveform Configuration... 4 Patient Alarms... 3 Change Waveform Order... 4 Viewing and Printing Trends... 5 5 Activate AG/CO 2 Module... Viewing and Printing Events... 5 Record Real Strip... 5 Disabling theTime SpORecording 2 Module... 6 Record Trend Table... 5 Cleaning the SpO 2 Module... 7 Record NIBPAsked Measurements... Frequently Questions... 6 7 Record Alarm Events... 6
P/N: 046-003724-00 Rev A
1
Central Station
Quick Reference Guide
Admit a Patient without Patient Information Select Menu key on control panel Using Control knob on control panel • Scroll and select Patient Setup • Select Quick Admit • Select Yes to confirm clearing prior data and • Select Patient Type (size) • Select OK to confirm and return to normal screen
Discharge a Patient Select Menu key on control panel Using Control knob on control panel • Scroll and select Patient Setup • Select Discharge Patient (Clear Patient Data) • Select Yes to confirm clearing prior data and return to normal screen Note: Clear Patient Data is present if patient information is omitted.
Set a NIBP Interval Using Control knob on control panel • Scroll and select NIBP tile • Scroll and select Interval • Scroll to select time • Scroll and select Exit (or Main key on control panel) to return to normal screen P/N: 046-003724-00 Rev A
2
Central Station
Quick Reference Guide
Set Alarm Limits Using Control knob on control panel (Option 1) • Scroll and select Parameter tile • Scroll and select Alm HI/Alm LO • Scroll to adjust alarm limit • Scroll and select Exit (or Main key on control panel) to return to normal screen OR Select Menu key on control panel (Option 2) Using Control knob on control panel • Scroll and select System Setup • Scroll and select Alarm Setup • Select Alm Sel • Select parameter’s Alm Setup • Scroll and select Alm HI/Alm LO • Scroll to adjust alarm limit • Select Main key on control panel to return to normal screen
Set Screen Configuration (Standard, Trends, OxyCRG, or Large Fonts) Select Menu key on control panel Using Control knob on control panel • Scroll and select System Setup • Scroll and select Face Select • Scroll to select screen P/N: 046-003724-00 Rev A
3
Central Station
Quick Reference Guide
• Scroll and select Exit to confirm • Select Main key on control panel to return to normal screen
Change Waveform Configuration Select Menu key on control panel Using Control knob on control panel • Scroll and select System Setup • Scroll and select Trace Setup • Scroll and select waveform(s) to be displayed (A √ in the waveform box indicates waveform is selected)
Change Waveform Order Select Menu key on control panel Using Control knob on control panel • Scroll and select System Setup • Scroll and select Trace Setup • Scroll and select Wave Sequence • Scroll to select channel to change • Select parameter • Scroll and select Exit to confirm • Select Main key on control panel to return to normal screen
P/N: 046-003724-00 Rev A
4
Central Station
Quick Reference Guide
Activate AG/CO2 Module Using Control knob on control panel • Scroll and select Gas (or Mindray/Oridion CO2) tile • Scroll and select Work Mode • Scroll to select Measure • Scroll and select Exit (or Main key on control panel) to return to normal screen Note: If Standby is selected, the Work Mode must be changed to Measure for AG/CO2 monitoring to resume.
Record Real time Recording Strip • Select Record key on control panel • Select Record key to stop (if continuous mode is enabled)
Record Trend Table Select Menu key on control panel Using Control knob on control panel • Scroll and select Trend Table • Scroll and select Resolution • Scroll to adjust time interval • Scroll and select REC to record • Scroll and select Exit (or Main key on control panel) to return to normal screen
P/N: 046-003724-00 Rev A
5
Central Station
Quick Reference Guide
Record NIBP Measurements Select Menu key on control panel Using Control knob on control panel • Scroll and select NIBP Recall • Scroll and select REC to record • Scroll and select Exit (or Main key on control panel) to return to normal screen
Record Alarm Events Select Menu key on control panel Using Control knob on control panel • Scroll and select Alarm Recall • Scroll to adjust Start/End time • Scroll and select Alarm Recall Event to select sorting criteria • Scroll and select Alarm Recall to view alarm event or up/down to view other alarm events • Scroll and select REC to record • Scroll and select Exit (or Main key on control panel) to return to normal screen
P/N: 046-003724-00 Rev A
6