Operators Manual
354 Pages
Preview
Page 1
VAULT COPY
Revision History This manual has a revision number. This revision number changes whenever the manual is updated due to software or technical specification change. Contents of this manual are subject to change without prior notice.
Revision number: 11.0
Release time:
2011-01
© Copyright 2008-2011 Mindray DS USA, Inc. All rights reserved.
WARNING z
Federal Law (USA) restricts this device to sale by or on the order of a physician.
I
Intellectual Property Statement Mindray DS USA, Inc. (hereinafter called Mindray DS) owns the intellectual property rights to this product and this manual. This manual may refer to information protected by copyrights or patents and does not convey any license under the copyright or patent rights of Mindray DS, nor the rights of others. Mindray DS intends to maintain the contents of this manual as confidential information. Disclosure of the information in this manual in any manner whatsoever without the written permission of Mindray DS is strictly forbidden. Release, amendment, reproduction, distribution, rental, adaptation and translation of this manual in any manner whatsoever without the written permission of Mindray DS is strictly forbidden.
is a trademark or a registered trademark of Shenzhen Mindray Bio-Medical Electronics Co., Ltd. All third-party trademarks that appear in this manual are used solely for editorial purposes and are the property of their respective owners. Contents of this manual are subject to changes without prior notice.
II
Manufacturer’s Responsibility All information contained in this manual is believed to be correct. Mindray DS shall not be liable for errors contained herein nor for incidental or consequential damages in connection with the furnishing or use of this manual. Mindray will not be liable for the effects on safety, reliability and performance of this product if:
any installation operations, expansions, changes, modifications or repairs of this product are not conducted by Mindray DS authorized personnel; and
the electrical installation of the relevant room does not comply with the applicable national and local requirements; and
the product is not used in accordance with the instructions for use.
Warranty This warranty is exclusive and is in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for any particular purpose.
Exemptions Mindray DS 's obligation or liability under this warranty does not include any transportation or other charges or liability for direct, indirect or consequential damages or delay resulting from the improper use or application of the product or the use of parts or accessories not approved by Mindray DS or repairs by people other than Mindray DS authorized personnel. This warranty shall not extend to
Any Mindray DS product which has been subjected to misuse, negligence or accident; or
Any Mindray DS product from which Mindray DS 's original serial number tag or product identification markings have been altered or removed; or
Any product of any other manufacturer.
III
Return Policy In the event that it becomes necessary to return a unit to Mindray DS, follow the instructions below. 1.
Return authorization. Contact the Customer Service Department and obtain a Customer Service Authorization number. This number must appear on the outside of the shipping container. Returned shipments will not be accepted if the number is not clearly visible. Please provide the model number, serial number, and a brief description of the reason for return.
2.
Freight policy The customer is responsible for freight charges when this product is shipped to Mindray DS for service (this includes customs charges).
3.
Return address Please send the part(s) or equipment to the address offered by the Customer Service Department.
Contact Information Manufacturer:
Mindray DS USA, Inc.
Address:
800 MacArthur Blvd.Mahwah, New Jersey 07430 USA
Tel:
1.800.288.2121
Website:
www.mindray.com
1.201.995.8000
IV
Preface Manual Purpose This manual contains the instructions necessary to operate the product safely and in accordance with its function and intended use. Observance of this manual is a prerequisite for proper product performance and correct operation and ensures patient and operator safety. This manual is based on the maximum configuration and therefore some contents may not apply to your product. If you have any question, please contact us. This manual is an integral part of the product. It should always be kept close to the equipment so that it can be obtained conveniently when needed.
Intended Audience This manual is geared for clinical professionals who are expected to have a working knowledge of medical procedures, practices and terminology as required for monitoring of critically ill patients.
Illustrations All illustrations in this manual serve as examples only. They may not necessarily reflect the setup or data displayed on your patient monitor.
Conventions
Italic text is used in this manual to quote the referenced chapters or sections.
[ ] is used to enclose screen texts.
ė is used to indicate operational procedures.
1
FOR YOUR NOTES
2
Contents 1 Safety... 1-1 1.1 Safety Information ... 1-1 1.1.1 Warnings ... 1-2 1.1.2 Cautions ... 1-3 1.1.3 Notes ... 1-3 1.2 Equipment Symbols ... 1-4 2 The Basics ... 2-1 2.1 Monitor Description ... 2-1 2.1.1 Intended Use ... 2-1 2.1.2 Contraindications ... 2-1 2.1.3 Components ... 2-1 2.2 Main Unit ... 2-2 2.2.1 Front View... 2-2 2.2.2 Side View ... 2-4 2.2.3 Rear View... 2-5 2.3 Satellite Module Rack ... 2-7 2.4 Modules... 2-8 2.4.1 Plug-In Modules... 2-8 2.4.2 Multi-Parameter Module... 2-9 2.5 Display Screen ... 2-10 2.6 QuickKeys... 2-12 3 Basic Operations ... 3-1 3.1 Installation... 3-1 3.1.1 Unpacking and Checking ... 3-2 3.1.2 Environmental Requirements... 3-3 3.2 Getting Started ... 3-4 3.2.1 Turning Power On ... 3-4 3.2.2 Starting Monitoring ... 3-4 3.3 Disconnecting from Power... 3-5 3.4 Using a mouse... 3-5 3.5 Using Keys... 3-6 3.6 Using Keyboards... 3-6 3.7 Using the Touchscreen ... 3-6 3.8 Setting the Screen... 3-7 3.9 Using the Main Menu ... 3-8 3.10 Setting Parameters... 3-9 3.10.1 Accessing the Parameters Menu... 3-9 1
3.10.2 Removing a Module Conflict... 3-10 3.10.3 Removing a Label Conflict ... 3-10 3.11 Using a CF Storage Card...3-11 3.12 Changing General Settings... 3-12 3.12.1 Setting up a Monitor... 3-12 3.12.2 Changing Language ... 3-12 3.12.3 Adjusting the Screen Brightness ... 3-12 3.12.4 Showing/Hiding the Help... 3-13 3.12.5 Setting the Date and Time ... 3-13 3.12.6 Adjusting Volume... 3-14 3.13 Managing Configurations... 3-15 3.13.1 Restoring the Latest Configuration Automatically... 3-15 3.13.2 Setting Default Configuration at Startup... 3-15 3.13.3 Saving as User Configuration ... 3-16 3.13.4 Deleting a User Default Configuration ... 3-16 3.13.5 Restoring Default Configuration Manually... 3-17 4 Managing Patients... 4-1 4.1 Admitting a Patient... 4-1 4.2 Quick Admitting a Patient... 4-2 4.3 Editing Patient Information... 4-3 4.4 Discharging a Patient ... 4-3 4.5 Transferring a Patient ... 4-3 4.6 Connecting to PanoramaTM Central Station ... 4-6 5 User Screens... 5-1 5.1 Tailoring Your Screens ... 5-1 5.1.1 Setting the Waveform Sweep Mode ... 5-1 5.1.2 Changing the Wave Line Size ... 5-1 5.1.3 Changing Measurement Colors... 5-1 5.1.4 Changing Screen Layout ... 5-2 5.2 Viewing Minitrends... 5-3 5.2.1 Having a Split-Screen View of Minitrends ... 5-3 5.2.2 Setting Minitrends... 5-4 5.3 Viewing oxyCRG ... 5-4 5.4 Viewing Other Patients ... 5-5 5.4.1 Care Group ... 5-5 5.4.2 Viewing the Care Group Overview Bar ... 5-5 5.4.3 Understanding the View Other Patient Window ... 5-6 5.5 Understanding the Big Numerics Screen ... 5-7 6 Alarms ... 6-1 6.1 Alarm Categories... 6-1 6.2 Alarm Levels ... 6-2 2
6.3 Alarm Indicators... 6-2 6.3.1 Alarm Lamp ... 6-2 6.3.2 Alarm Message... 6-3 6.3.3 Flashing Numeric ... 6-3 6.3.4 Audible Alarm Tones... 6-3 6.3.5 Reminder Tones... 6-4 6.3.6 Alarm Status Symbols ... 6-4 6.4 Alarm Tone Configuration ... 6-5 6.4.1 Setting the Minimum Alarm Volume ... 6-5 6.4.2 Changing the Alarm Volume ... 6-5 6.4.3 Setting the Interval between Alarm Sounds ... 6-6 6.4.4 Changing the Alarm Tone Pattern ... 6-7 6.4.5 Setting the Reminder Tones ... 6-7 6.5 Understanding the Alarm Setup Menu ... 6-7 6.5.1 Setting Alarm Properties for All Parameters ... 6-8 6.5.2 Adjusting Alarm Limits Automatically ... 6-8 6.5.3 Setting Alarm Delay Time... 6-13 6.5.4 Entering CPB Mode ... 6-13 6.6 Pausing Alarms ... 6-14 6.7 Silencing the Alarm Sound... 6-14 6.8 Latching Alarms... 6-14 6.9 Silencing Technical Alarms... 6-15 6.10 Testing Alarms ... 6-15 6.11 When an Alarm Occurs ... 6-16 6.12 Using Care Group Alarms... 6-16 6.12.1 Care Group Auto Alarms... 6-16 6.12.2 Silencing Care Group Alarms ... 6-16 7 Monitoring ECG ... 7-1 7.1 Introduction... 7-1 7.2 Safety ... 7-2 7.3 Preparing to Monitor ECG ... 7-3 7.3.1 Preparing the Patient and Placing the Electrodes... 7-3 7.3.2 Choosing AHA or IEC Lead Placement ... 7-4 7.3.3 ECG Lead Placements... 7-4 7.3.4 Checking Paced Status ... 7-7 7.4 Understanding the ECG Display... 7-8 7.5 Changing ECG Settings ... 7-9 7.5.1 Accessing ECG Menus... 7-9 7.5.2 Setting Pacemaker Rate (For Mortara only)... 7-9 7.5.3 Choosing the Alarm Source ... 7-9 7.5.4 Setting the ECG Lead Set ... 7-9 7.5.5 Choosing an ECG Display Screen ... 7-9 7.5.6 Changing the ECG Filter Settings... 7-10 3
7.5.7 Switching the Notch Filter On or Off... 7-10 7.5.8 About the Defibrillator Synchronization ...7-11 7.5.9 Changing ECG Wave Settings ...7-11 7.5.10 Choosing the Heart Rate Source ... 7-12 7.5.11 Enabling Smart Lead Off ... 7-12 7.5.12 Setting the Alarm Level for ECG Lead Off Alarms ... 7-12 7.5.13 Adjusting QRS Volume ... 7-12 7.6 About ST Monitoring ... 7-13 7.6.1 Switching ST On and Off... 7-13 7.6.2 Changing ST Filter Settings ... 7-13 7.6.3 Understanding the ST Display ... 7-14 7.6.4 Changing the ST Alarm Limits ... 7-14 7.6.5 Setting the ST Alarm Delay Time ... 7-14 7.6.6 Adjusting ST Measurement Points ... 7-14 7.7 About Arrhythmia Monitoring ... 7-16 7.7.1 Understanding the Arrhythmia Events ... 7-17 7.7.2 Changing Arrhythmia Alarm Settings ... 7-18 7.7.3 Changing Arrhythmia Threshold Settings... 7-18 7.7.4 Reviewing Arrhythmia Events ... 7-19 7.7.5 Initiating an ECG Relearning Manually... 7-19 7.7.6 Automatic ECG Relearning... 7-19 7.8 12-Lead ECG Monitoring ... 7-20 8 Monitoring Respiration (Resp) ... 8-1 8.1 Introduction... 8-1 8.2 Safety Information ... 8-1 8.3 Understanding the Resp Display... 8-2 8.4 Placing Resp Electrodes... 8-2 8.4.1 Optimizing Lead Placement for Resp ... 8-3 8.4.2 Cardiac Overlay ... 8-3 8.4.3 Abdominal Breathing ... 8-3 8.4.4 Lateral Chest Expansion ... 8-4 8.5 Choosing the Respiration Lead ... 8-4 8.6 Changing the Apnea Alarm Delay... 8-4 8.7 Changing Resp Detection Mode ... 8-4 8.8 Changing Resp Wave Settings ... 8-5 8.9 Setting RR Source... 8-5 8.10 Setting alarm properties ... 8-6 8.11 Switching Resp Measurement On/Off... 8-6 9 Monitoring PR... 9-1 9.1 Introduction... 9-1 9.2 Setting the PR Source ... 9-2 9.3 Selecting the Active Alarm Source ... 9-3 4
9.4 QRS Tone ... 9-3 10 Monitoring SpO2... 10-1 10.1 Introduction... 10-1 10.2 Safety ... 10-2 10.3 Identifying SpO2 Modules... 10-3 10.4 Applying the Sensor ... 10-3 10.5 Changing SpO2 Settings ... 10-4 10.5.1 Accessing SpO2 Menus ... 10-4 10.5.2 Adjusting the Desat Alarm ... 10-4 10.5.3 Setting SpO2 Sensitivity... 10-4 10.5.4 Changing Averaging Time... 10-4 10.5.5 Monitoring SpO2 and NIBP Simultaneously... 10-5 10.5.6 Sat-Seconds Alarm Management ... 10-5 10.5.7 Changing the Speed of the Pleth Wave ... 10-6 10.5.8 Setting the Alarm Level for SpO2 Sensor Off Alarm... 10-6 10.5.9 Setting the SpO2 Tone Mode ... 10-7 10.6 Measurement Limitations... 10-7 10.7 Masimo Information ... 10-8 10.8 Nellcor Information... 10-8 11 Monitoring NIBP...11-1 11.1 Introduction ...11-1 11.2 Safety ...11-2 11.3 Measurement Limitations...11-3 11.4 Measurement Methods ...11-3 11.5 Setting Up the NIBP Measurement ...11-3 11.5.1 Preparing to Measure NIBP ...11-3 11.5.2 Starting and Stopping Measurements ...11-4 11.5.3 Correcting the Measurement if Limb is not at Heart Level...11-4 11.5.4 Enabling NIBP Auto Cycling and Setting the Interval...11-4 11.5.5 Starting a STAT Measurement...11-5 11.6 Understanding the NIBP Numerics ...11-5 11.7 Changing NIBP Settings ...11-6 11.7.1 Setting the Initial Cuff Inflation Pressure...11-6 11.7.2 Setting NIBP Alarm Properties...11-6 11.7.3 Displaying NIBP List ...11-6 11.7.4 Setting the Pressure Unit ...11-7 11.8 Assisting Venous Puncture ...11-7 11.9 Resetting NIBP...11-7 11.10 NIBP Leakage Test...11-8 11.11 NIBP Accuracy Test ...11-9 11.12 Calibrating NIBP...11-10
5
12 Monitoring Temp... 12-1 12.1 Introduction... 12-1 12.2 Safety ... 12-1 12.3 Making a Temp Measurement... 12-2 12.4 Understanding the Temp Display ... 12-2 12.5 Setting the Temperature Unit ... 12-2 13 Monitoring IBP ... 13-1 13.1 Introduction... 13-1 13.2 Safety ... 13-1 13.3 Setting Up the Pressure Measurement ... 13-2 13.4 Understanding the IBP Display... 13-3 13.5 Changing IBP Settings ... 13-4 13.5.1 Changing a Pressure for Monitoring ... 13-4 13.5.2 Setting Alarm Properties ... 13-4 13.5.3 Changing Averaging Time... 13-4 13.5.4 Setting the Pressure Unit... 13-5 13.5.5 Setting Up the IBP Wave... 13-5 13.6 Measuring PAWP ... 13-6 13.6.1 Preparing to Measure PAWP ... 13-7 13.6.2 Setting Up the PAWP Measurement... 13-8 13.6.3 Understanding the PAWP Setup Menu... 13-9 13.7 Zeroing the Transducer ... 13-9 14 Monitoring Cardiac Output ... 14-1 14.1 Introduction... 14-1 14.2 Understanding the C.O. Display ... 14-2 14.3 Influencing Factors ... 14-2 14.4 Setting Up the C.O. Measurement ... 14-3 14.5 Measuring the Blood Temperature ... 14-6 14.6 Changing C.O. Settings... 14-7 14.6.1 Setting the Temperature Unit ... 14-7 14.6.2 Setting Alarm Properties ... 14-7 15 Monitoring CCO/SvO2... 15-1 15.1 Introduction... 15-1 15.2 Safety ... 15-1 15.3 Automatic Communication Detection... 15-2 15.4 Connecting the Vigilance II® Monitor ... 15-2 15.5 Understanding CCO Parameters ... 15-4 15.6 Understanding the CCO Display... 15-4 15.7 Changing CCO Settings ... 15-5 15.7.1 Selecting Vascular Resistance Unit ... 15-5
6
15.7.2 Selecting the Displayed Parameters ... 15-5 15.7.3 Checking the C.O. Measurements... 15-5 15.7.4 Setting Signal Output ... 15-5 15.7.5 Selecting Alarm Properties... 15-6 15.8 Understanding SvO2 Parameters ... 15-6 15.9 Understanding the SvO2 Display... 15-6 15.10 Changing SvO2 Settings ... 15-7 15.10.1 Setting Signal Output ... 15-7 15.10.2 Selecting Alarm Properties... 15-7 16 Monitoring Carbon Dioxide ... 16-1 16.1 Introduction... 16-1 16.2 Identifying CO2 Modules ... 16-2 16.3 Preparing to Measure CO2... 16-3 16.3.1 Using a Sidestream CO2 Module ... 16-3 16.3.2 Using a Microstream CO2 Module... 16-4 16.3.3 Using a Mainstream CO2 Module ... 16-5 16.4 Changing CO2 Settings... 16-6 16.4.1 Accessing CO2 Menus... 16-6 16.4.2 Entering the Standby Mode... 16-6 16.4.3 Setting the CO2 Unit... 16-6 16.4.4 Setting up Gas Compensations... 16-7 16.4.5 Setting up Humidity Compensation ... 16-8 16.4.6 Setting the Apnea Alarm Delay... 16-8 16.4.7 Choosing a Time Interval for Peak-Picking ... 16-9 16.4.8 Setting the Flow Rate ... 16-9 16.4.9 Setting up the CO2 Wave... 16-9 16.4.10 Setting RR Source ... 16-9 16.5 Setting Barometric Pressure Compensation ... 16-10 16.6 Measurement Limitations... 16-10 16.7 Troubleshooting the Sidestream CO2 Sampling System ...16-11 16.8 Removing Exhaust Gases from the System ...16-11 16.9 Zeroing the Sensor ...16-11 16.9.1 For Sidestream and Microstream CO2 Modules...16-11 16.9.2 For Mainstream CO2 Modules ... 16-12 16.10 Calibrating the Sensor ... 16-12 16.11 Oridion Information ... 16-13 17 Monitoring AG ... 17-1 17.1 Introduction... 17-1 17.2 Identifying AG Modules ... 17-1 17.3 Understanding the AG Display ... 17-2 17.4 MAC Values... 17-3 17.5 Preparing to Measure AG... 17-4 7
17.6 Changing AG Settings... 17-5 17.6.1 Setting Gas Unit ... 17-5 17.6.2 Setting the Apnea Alarm Delay... 17-5 17.6.3 Changing the Sample Flow Rate... 17-6 17.6.4 Setting up the O2 Compensation ... 17-6 17.6.5 Entering the Standby Mode... 17-6 17.6.6 Setting up the AG Wave ... 17-7 17.6.7 Setting RR Source ... 17-7 17.7 Changing the Anesthetic Agent... 17-7 17.8 Measurement Limitations... 17-7 17.9 Troubleshooting ... 17-8 17.9.1 When the Gas Inlet is Blocked ... 17-8 17.9.2 When an Internal Occlusion Occurs... 17-8 17.10 Removing Exhaust Gases from the System ... 17-8 18 Monitoring ICG... 18-1 18.1 Introduction... 18-1 18.2 Safety ... 18-1 18.3 Understanding ICG Parameters... 18-2 18.3.1 Measured Parameters ... 18-2 18.3.2 Calculated Parameters... 18-2 18.4 Understanding the ICG Display ... 18-3 18.5 ICG Limitations ... 18-3 18.6 Preparing to Monitor ICG ... 18-4 18.6.1 Preparing the Patient ... 18-4 18.6.2 Placing ICG Sensors ... 18-4 18.6.3 Setting up the Patient Information ... 18-5 18.7 Changing ICG Settings ... 18-5 18.7.1 ICG Averaging ... 18-5 18.7.2 Selecting Secondary Parameters ... 18-6 18.7.3 Checking Sensors ... 18-6 18.7.4 Changing the ICG Wave Speed... 18-6 19 Monitoring BIS... 19-1 19.1 Introduction... 19-1 19.2 Safety Information ... 19-2 19.3 Understanding the BIS Display... 19-3 19.3.1 BIS Parameter Area... 19-3 19.3.2 BIS Waveform Area ... 19-4 19.4 Setting up the BIS Measurement... 19-5 19.5 Continuous Impedance Check... 19-6 19.6 Cyclic Impedance Check... 19-6 19.7 BIS Sensor Check Window... 19-7 19.8 Choosing the BIS Smoothing Rate ... 19-8 8
19.9 Changing the Secondary Parameters... 19-8 19.10 Changing the EEG Wave Size... 19-8 19.11 Changing the Speed of the EEG Wave... 19-8 19.12 Setting the Trend Length... 19-8 20 Monitoring RM ... 20-1 20.1 Introduction... 20-1 20.2 Safety Information ... 20-3 20.3 Preparing to Monitor RM... 20-4 20.4 Understanding the RM Display... 20-5 20.5 Changing RM Settings ... 20-6 20.5.1 Accessing RM Menus ... 20-6 20.5.2 Setting the Apnea Alarm Delay... 20-6 20.5.3 Selecting TV or MV for Display ... 20-6 20.5.4 Selecting Flow or Vol Waveform for Display ... 20-6 20.5.5 Changing the Wave Sweep Speed ... 20-7 20.5.6 Changing the Wave Scale... 20-7 20.5.7 Setting RR Source ... 20-7 20.6 Understanding the Respiratory Loops... 20-8 20.7 Zeroing the RM Module... 20-9 20.8 Calibrating the Flow Sensor... 20-9 21 Freezing Waveforms ... 21-1 21.1 Freezing Waveforms ... 21-1 21.2 Viewing Frozen Waveforms ... 21-1 21.3 Unfreezing Waveforms ... 21-2 21.4 Recording Frozen Waveforms... 21-2 22 Review ... 22-1 22.1 Accessing Respective Review Windows... 22-1 22.2 Reviewing Graphic Trends... 22-2 22.3 Reviewing Tabular Trends ... 22-3 22.4 Reviewing Events ... 22-5 22.5 Reviewing Waveforms ... 22-7 23 Calculations ... 23-1 23.1 Introduction... 23-1 23.2 Dose Calculations ... 23-2 23.2.1 Performing Calculations... 23-2 23.2.2 Selecting the Proper Drug Unit ... 23-3 23.2.3 Titration Table ... 23-3 23.3 Oxygenation Calculations ... 23-4 23.3.1 Performing Calculations... 23-4 23.3.2 Entered Parameters... 23-5 9
23.3.3 Calculated Parameters... 23-5 23.4 Ventilation Calculations ... 23-6 23.4.1 Performing Calculations... 23-6 23.4.2 Entered Parameters... 23-7 23.4.3 Calculated Parameters... 23-7 23.5 Hemodynamic Calculations ... 23-8 23.5.1 Performing Calculations... 23-8 23.5.2 Entered Parameters... 23-9 23.5.3 Calculated Parameters... 23-9 23.6 Renal Calculations ... 23-10 23.6.1 Performing Calculations... 23-10 23.6.2 Entered Parameters...23-11 23.6.3 Calculated Parameters...23-11 23.7 Understanding the Review Window... 23-12 24 Recording... 24-1 24.1 Using a Recorder... 24-1 24.2 Overview of Recording Types... 24-2 24.3 Starting and Stopping Recordings... 24-3 24.4 Setting up the Recorder... 24-4 24.4.1 Accessing the Record Setup Menu... 24-4 24.4.2 Selecting Waveforms for Recording ... 24-4 24.4.3 Setting the Realtime Recording Length ... 24-4 24.4.4 Setting the Interval between Timed Recordings... 24-4 24.4.5 Changing the Recording Speed ... 24-4 24.4.6 Clearing Recording Tasks ... 24-5 24.5 Loading Paper ... 24-5 24.6 Removing Paper Jam ... 24-6 24.7 Cleaning the Recorder Printhead ... 24-6 25 Printing ... 25-1 25.1 Printer... 25-1 25.2 Connecting a printer... 25-1 25.3 Setting Up the Printer... 25-2 25.4 Starting Report Printouts... 25-2 25.5 Stopping Reports Printouts ... 25-4 25.6 Setting Up Reports ... 25-4 25.6.1 Setting Up ECG Reports ... 25-4 25.6.2 Setting Up Tabular Trends Reports ... 25-4 25.6.3 Setting Up Graphic Trends Reports ... 25-5 25.6.4 Setting Up Realtime Reports... 25-5 25.7 End Case Reports ... 25-5 25.8 Printer Statuses... 25-6 25.8.1 Printer Out of Paper ... 25-6 10
25.8.2 Printer Status Messages... 25-6 26 Other Functions... 26-1 26.1 Marking Events ... 26-1 26.2 Privacy Mode ... 26-1 26.3 Night Mode ... 26-2 26.4 Analog Output ... 26-3 26.5 Transferring Data ... 26-3 26.5.1 Data Export System... 26-3 26.5.2 Transferring Data by Different Means ... 26-4 26.6 Nurse Call ... 26-5 26.7 Remote Display... 26-6 26.8 Wireless Network... 26-7 27 Batteries ... 27-1 27.1 Overview... 27-1 27.2 Installing or Replacing a Battery... 27-2 27.3 Conditioning a Battery ... 27-3 27.4 Checking a Battery... 27-4 27.5 Recycling a Battery ... 27-4 28 Care and Cleaning... 28-1 28.1 General Points ... 28-1 28.2 Cleaning ... 28-2 28.3 Disinfecting... 28-3 29 Maintenance ... 29-1 29.1 Safety Checks... 29-1 29.2 Service Tasks... 29-2 29.3 Checking Monitor and Module Information ... 29-3 29.4 Calibrating ECG... 29-3 29.5 Calibrating the Touchscreen... 29-3 29.6 Calibrating CO2 ... 29-4 29.7 Calibrating AG ... 29-5 29.8 Setting up IP Address ... 29-6 29.9 Entering/Exiting Demo Mode ... 29-6 30 Accessories ... 30-1 30.1 ECG Accessories... 30-2 30.2 SpO2 Accessories ... 30-3 30.3 NIBP Accessories... 30-5 30.4 Temp Accessories... 30-7 30.5 IBP Accessories... 30-7 30.6 C.O. Accessories .. ... ...30-8 11
30.7 CCO/SvO2 Accessories...30-9 30.8 CO2 Accessories... 30-9 30.9 AG Accessories ... 30-10 30.10 ICG Accessories... 30-10 30.11 BIS Accessories... 30-10 30.12 RM Accessories... 30-10 30.13 Others... 30-10 A Product Specifications...A-1 A.1 Monitor Safety Specifications...A-1 A.2 Physical Specifications...A-4 A.3 Hardware Specifications ...A-5 A.4 Data Storage ...A-9 A.5 Wireless Network ...A-9 A.6 Measurement Specifications ...A-10 B EMC...B-1 C Factory Defaults ...C-1 C.1 Patient Demographics...C-1 C.2 Alarm Setup...C-1 C.3 Screen Setup ...C-1 C.4 ECG Setup...C-2 C.5 Resp Setup...C-4 C.6 PR ...C-4 C.7 SpO2 Setup...C-5 C.8 NIBP Setup...C-6 C.9 Temp Setup...C-6 C.10 IBP Setup...C-7 C.11 C.O. Setup ...C-8 C.12 CCO/SvO2 Setup ...C-8 C.13 CO2 Setup ...C-9 C.14 AG Setup ...C-10 C.15 ICG Setup ... C-11 C.16 BIS Setup... C-11 C.17 RM Setup...C-12 D Alarm Messages...D-1 D.1 Physiological Alarm Messages...D-2 D.2 Technical Alarm Messages...D-3 E Symbols and Abbreviations ...E-1 E.1 Symbols ... E-1 E.2 Abbreviations... E-3 12
1 Safety 1.1 Safety Information WARNING z
Indicates a potential hazard or unsafe practice that, if not avoided, could result in death or serious injury.
CAUTION z
Indicates a potential hazard or unsafe practice that, if not avoided, could result in minor personal injury or product/property damage.
NOTE z
Provides application tips or other useful information to ensure that you get the most from your product.
1-1