Datascope

Ultrasound Diagnostic Imaging Systems

M5 Operators Manual Acoustic Power Data and Surface Temperature Data

Operators Manual

71 Pages

File Type: PDF

File Size: 432 KB

File Name: m5_operators_manual_acoustic_power_data_and_surface.pdf

Preview

Page 1

M5 Diagnostic Ultrasound System

Operator’s Manual [Acoustic Power Data and Surface Temperature Data]

Introduction

This manual gives all the transducers Acoustic Output Power data and Surface Temperature Data for M5 Diagnostic Ultrasound System. Please refer to correlative tables in use.

IMPORTANT! 1. No part of this manual may be copied or reprinted, in whole or in part, without written permission. 2. The contents of this manual are subject to change without prior notice and without our legal obligation.

I-1

Contents

How to Read the Acoustic Power Tables ...1 Transducer Maximum Surface Temperature...2 Acoustic Output Reporting Tables ...3 3C5s ...3 7L4s...10 6CV1s...17 10L4s...24 7L6s...31 6C2s ...38 6LE7s ...45 6LB7s ...52

C-1

How to Read the Acoustic Power Tables

How to Read the Acoustic Power Tables Description of symbols used in acoustic output tables Symbol

Description

Acoustic attenuation coefficient

Aaprt

-12 dB output beam area

Deq

Equivalent aperture diameter

deq

Equivalent beam diameter

fawf

Acoustic working frequency (MHz)

Ipa

Pulse average intensity

Ipa, α

Attenuated pulse average intensity

Ipi

Pulse intensity integral

Ipi, α

Attenuated pulse intensity integral

Ita(z)

Temporal average intensity

Ita, α(z)

Attenuated temporal average intensity

Izpta (z)

Spatial-peak temporal-average intensity

Izpta, α(z)

Attenuated Spatial-peak temporal-average intensity

Mechanical Index

Output power

Pα

Attenuated power

Bonded output power

Pulse pressure squared integral

Peak rarefactional acoustic pressure

pr.a

Attenuated Peak rarefactional acoustic pressure

prr

Pulse repetition frequency (Hz)

Thermal index

TIS

Soft tissue thermal index

TIB

Bone thermal index

TIC

Cranial-bone thermal index

Depth for TIB

Zbp

Break point depth

Depth for TIS

NOTE： About the detail of acoustic power, please refer to the regulation of ALARA in operator’s manual (Basic Volume).

Transducer Maximum Surface Temperature

Transducer Maximum Surface Temperature According to the requirements of the section 42.3 in the standard IEC60601-2-37：2005, the transducer surface temperature has been tested in two kinds of conditions: the transducer suspended in still air or transducer contacting human-tissue mimicking material. The calculation of the expanded uncertainty is based on the ISO Guide to the Expression of uncertainty in measurement. Three transducer samples have been tested and the confidence coefficient is at 95%, the value of t.975 is 4.30.

* The measurement data were obtained under the test conditions employed at Mindray. Transducer model

Maximum surface temperature (°C)

Maximum surface temperature (°C)*1

Contacting TMM

Suspending in air

3C5s

40.57±0.68

36.33±2.09

6C2s

40.13±2.16

36.10±4.61

7L4s

41.80±0.57

37.43±1.04

7L6s

37.73±0.68

30.77±0.68

10L4s

40.87±0.40

32.90±1.34

6CV1s

42.07±0.81

31.87±2.03

6LE7s

41.27±0.59

31.17±0.68

6LB7s(Convex)

41.47±0.40

29.13±0.81

6LB7s(Linear)

41.27±0.59

31.17±0.68

*1: Values following the "±" mark indicate the expanded uncertainty with a confidence level of 95%, t.975 = 4.30.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: 3C5s Imaging Mode: M-mode TIS Index Label

Maximum Index Value

Scan

1.08E+00 1.81E+00

pr.a

TIB

Non-scan

Nonscan

TIC

7.26E-01

1.58E+00

1.00E+00

5.41E+01

Aaprt≤1cm

Aaprt> 2 1cm

Min of [Pα(zs), Ita,α(zs)] zs Associate Acoustic Parameter

zbp zb

4.67E+00 4.75E+00

z at max.Ipi,α

2.83E+00 5.91E-01

3.12E-01 2.83E+00 5.91E-01

7.76E-01

deq(zb) fawf

2.83E+00

Dim Aaprt

td Other Information

prr pr at max. Ipi

Operating Control Conditions

7.76E-01

5.70E-07 2.00E+03 2.59E+00 3.03E-01

deq at max. Ipi Ipa,α at max. MI

2.83E+00 5.91E-01

2.53E+02

Control 1

Focal position: at the 8.0cm of B-mode

Control 2

Depth: 9.90cm

Control 3

Working Frequency: H6.0MHz

Control 4

PRF: 2000Hz

Control 5

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: Imaging Mode:

3C5s B-mode TIS

Index Label

1.08E+00 1.81E+00

pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

Non-scan

Maximum Index Value

TIB

Scan

Aaprt≤1 2 cm

Aaprt> 1 2 cm

Nonscan

TIC

8.39E-01

1.26E+00

6.04E+02

2.83E+00 5.91E-01

7.76E-01

[Pα(zs),

zbp zb z at max.Ipi,α

4.75E+00

deq(zb)

2.83E+00

fawf Dim of Aaprt

X Y

td Other Information

prr pr at max. Ipi deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

5.70E-07 7.83E+03 2.59E+00 2.53E+02

Control 1

Focal zone number: one ; Focal position: 8.0cm for B-mode

Control 2

Depth: 9.90cm

Control 3

Working Frequency: H6.0MHz

Control 4

PRF: 3900Hz

Control 5

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: Imaging Mode:

3C5s B+M-mode TIS

Index Label

1.08E+00 1.81E+00

pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

Non-scan

Maximum Index Value

TIB Nonscan

TIC

7.26E-01

1.58E+00

1.55E+00

5.41E+01

3.22E+02

Scan

Aaprt≤1 2 cm

3.73E-01 2.69E+02

[Pα(zs),

zbp zb

4.67E+00

z at max.Ipi,α

4.75E+00

deq(zb)

2.83E+00

fawf Dim of Aaprt

X Y

td Other Information

prr pr at max. Ipi

2.83E+00 5.91E-01

3.12E-01 2.83E+00 5.91E-01

7.76E-01

5.70E-07 2.00E+03 2.59E+00

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

Aaprt> 2 1 cm

3.03E-01 2.53E+02

Control 1

Focal position: at the 8.0cm of B-mode

Control 2

Depth: 9.90cm

Control 3

Working Frequency: H6.0MHz

Control 4

PRF: 7830Hz

Control 5

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: Imaging Mode:

3C5s

PW-mode TIS

Index Label

Non-scan Scan

1.33E+00 2.15E+00

Maximum Index Value pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

TIB Nonscan

TIC

1.10E+00

3.28E+00

1.53E+00

8.91E+01

Aaprt≤1 2 cm

Aaprt> 2 1 cm

[Pα(zs),

zbp zb

4.25E+00

z at max.Ipi,α

4.42E+00

deq(zb)

2.62E+00

fawf Dim Aaprt

td Other Information

prr pr at max. Ipi

2.86E-01 2.62E+00 3.38E-01

2.62E+00 3.38E-01

7.78E-01

1.45E-06 1.65E+03 2.79E+00

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

2.62E+00 3.38E-01

2.78E-01 2.76E+02

Control 1

Sampling Volume Position: at the 6.0cm of B-mode

Control 2

Depth: 7.40cm

Control 3

Working Frequency: 2.5MHz, SV=0.5mm.

Control 4

PRF: 1650Hz

Control 5

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: 3C5s Imaging Mode:

B+PW-mode TIS

Index Label

Non-scan

Maximum Index Value

Scan

1.15E+00 1.86E+00

pr.a P

TIB

Aaprt≤1 cm

TIC

Non-scan

Aaprt> 2 1 cm

3.68E-01

9.00E-01

2.76E+00

1.76E+00

2.61E+02

7.18E+01

3.30E+02

Min of [Pα(zs), Ita,α(zs)] zs Associate Acoustic Parameter

zbp

4.30E+00

zb z at max.Ipi,α

4.40E+00

deq(zb) X

2.88E+00 4.69E-01

2.62E+00 3.36E-01

2.67E-01 2.62E+00 3.36E-01

7.24E-01

7.55E-01

fawf

2.62E+00

Dim of Aaprt td Other Information

prr pr at max. Ipi deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

Note 1 mode.

1.45E-06 1.80E+03 2.61E+00 2.60E-01 2.32E+02

Control 1

Focal zone number: one , Focal position: 6.0cm for B-mode

Control 2

Sampling Volume Position: at the 6.0cm of B-mode

Control 3

Depth: 7.40cm

Control 4

Working Frequency:H6.0MHz for B-mode, and 2.5MHz for PW-mode

Control 5

Scan Line Mode: lower-density line and minimum scan angle for B mode

Control 6

PRF: 7830Hz for B-mode, and 1650Hz for PW-mode; SV=0.5mm.

Highest transmission power (100%) Control 7 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: 3C5s Imaging Mode:

Color+B-Mode/Power+B-Mode TIS

Index Label

1.02E+00 1.63E+00

pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

Non-scan

Maximum Index Value

TIB

Scan

Aaprt≤1 2 cm

Aaprt>1 2 cm

Nonscan

TIC

1.36E+00

2.22E+00

3.62E+02

[Pα(zs),

zbp zb

5.03E+00

z at max.Ipi,α deq(zb) fawf

2.53E+00

Dim Aaprt

td Other Information

prr pr at max. Ipi

1.51E-06 7.80E+03 2.18E+00

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

1.44E+02

Control 1

B-Mode Focal zone number: one ; Focal position: 6.0cm for B-mode

Control 2

Color Sampling Gate Position: at the 6.0cm of B-mode; Color Sampling Gate Width: minimum.

Control 3

Depth: 7.40 cm

Control 4

Working Frequency: H6.0MHz for B-mode, and 2.5MHz for Color-mode

Control 5

Scan Line Mode: minimum scan angle for B-mode, and lower-density line for B-mode and Color-mode, and color sensitivity : 3 .

Control 6

PRF: 7830Hz for B-mode, and 7800Hz for Color-mode

Control 7

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: Imaging Mode:

3C5s

Color+B+PW-Mode/Power+B+PW-Mode TIS

Index Label

Maximum Index Value

1.05E+00 1.70E+00

pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

TIB Non-scan

Scan

Aaprt≤1 cm

Aaprt> 2 1 cm

6.57E-01

2.00E+00

2.39E+00

2.51E+02

5.23E+01

3.03E+02

[Pα(zs),

zbp

4.48E+00

4.72E+00

z at max.Ipi,α

2.63E+00 3.43E-01

2.77E-01 2.63E+00 3.43E-01

7.47E-01

fawf

2.63E+00

Dim of Aaprt td prr pr at max. Ipi

1.45E-06 1.65E+03 2.18E+00 2.66E-01

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

TIC

9.10E-01

deq(zb)

Other Information

Nonscan

1.81E+02

Control 1

B mode Focal zone number : one ; Focal position: 6.0cm for B-mode

Control 2

Sampling Volume Position: at the 6.0cm of B-mode; Color Sampling Gate Position: at the 7.4cm of B-mode.

Control 3

Color Sampling Gate Width : Minimum Gate.

Control 4

Depth: 7.40cm Working Frequency : H6.0MHz for B-mode, 2.5MHz for PW-mode, and 2.5MHz for Color-mode, and color sensitivity: 3 . Scan Line Mode: Minimum scan angle for B-mode, and lower-density line for B-mode and Color-mode, SV=0.5mm. PRF: 7830Hz for B-mode, 1650Hz for PW-mode, 1650Hz for Color-mode. Acoustic Power: Highest transmission power (100%).

Control 5 Control 6 Control 7

Control 8 Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: Imaging Mode:

7L4s M-mode TIS

Index Label

Non-scan

Scan

1.10E+00 2.85E+00

Maximum Index Value pr.a

TIB

Nonscan

TIC

6.02E-02

1.98E-01

8.18E-02

1.85E+00

Aaprt≤1cm

Aaprt> 2 1cm

Min of [Pα(zs), Ita,α(zs)] zs Associate Acoustic Parameter

zbp

1.32E+00

1.40E+00

z at max.Ipi,α deq(zb) fawf

6.76E+00

Dim Aaprt

td Other Information

prr pr at max. Ipi

1.13E-01 6.76E+00 2.04E-01

6.76E+00 2.04E-01

2.52E-01

1.23E-07 2.00E+03 3.72E+00 1.09E-01

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

6.76E+00 2.04E-01

4.30E+02 of

B-mode

Control 1

Focal position: at the 2.0cm

Control 2

Depth: 2.50cm

Control 3

Working Frequency: 5.0MHz

Control 4

PRF: 2000Hz

Control 5

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: Imaging Mode:

7L4s B-mode TIS

Index Label

1.10E+00 2.85E+00

pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

Non-scan

Maximum Index Value

TIB

Scan

Aaprt≤1 2 cm

Aaprt> 1 2 cm

Nonscan

TIC

1.86E-01

1.65E-01

1.42E+01

6.76E+00 2.04E-01

2.52E-01

[Pα(zs),

zbp zb z at max.Ipi,α

1.40E+00

deq(zb)

6.76E+00

fawf Dim of Aaprt

X Y

td Other Information

prr pr at max. Ipi deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

1.23E-07 1.57E+04 3.72E+00 4.30E+02

Control 1

Focal zone number: one ; Focal position: 2.0cm for B-mode

Control 2

Depth: 2.50cm

Control 3

Working Frequency: 5.0MHz

Control 4

PRF: 15680Hz

Control 5

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: Imaging Mode:

7L4s B+M-mode TIS

Index Label

1.10E+00 2.85E+00

pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

Non-scan

Maximum Index Value

TIB Nonscan

TIC

6.02E-02

1.98E-01

2.25E-01

1.85E+00

1.42E+01

Scan

Aaprt≤1 2 cm

1.62E-01 1.24E+01

[Pα(zs),

zbp zb

1.32E+00

z at max.Ipi,α

1.40E+00

deq(zb)

6.76E+00

fawf Dim of Aaprt

X Y

td Other Information

prr pr at max. Ipi

6.76E+00 2.04E-01

1.13E-01 6.76E+00 2.04E-01

2.52E-01

1.23E-07 2.00E+03 3.72E+00

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

Aaprt> 2 1 cm

1.09E-01 4.30E+02

Control 1

Focal position: at the 2.0cm of B-mode

Control 2

Depth: 2.50cm

Control 3

Working Frequency: 5.0MHz

Control 4

PRF: 15680Hz

Control 5

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: Imaging Mode:

7L4s

PW-mode TIS

Index Label

Non-scan Scan

1.17E+00 2.57E+00

Maximum Index Value pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

Nonscan

TIC

2.92E-01

1.38E+00

5.04E-01

1.30E+01

Aaprt≤1 2 cm

zbp zb

1.35E+00

z at max.Ipi,α

1.42E+00 4.81E+00

fawf Dim Aaprt

td prr pr at max. Ipi

X Y

4.81E+00 2.78E-01

1.22E-01 4.81E+00 2.78E-01

4.81E+00 2.78E-01

1.94E-01

8.59E-07 2.30E+03 3.16E+00

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

Aaprt> 2 1 cm

[Pα(zs),

deq(zb)

Other Information

TIB

1.19E-01 3.12E+02

Control 1

Sampling Volume Position: at the 2.8cm of B-mode

Control 2

Depth: 3.70cm

Control 3

Working Frequency: 4.6MHz

Control 4

PRF: 2300Hz, SV=0.5mm.

Control 5

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: 7L4s Imaging Mode:

B+PW-mode TIS

Index Label

9.51E-01 2.55E+00

pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

Non-scan

Maximum Index Value

TIB

Scan

Aaprt≤1 cm

1.24E-01

1.61E-01

7.49E-01

3.69E-01

9.17E+00

7.06E+00

1.55E+01

[Pα(zs),

zbp zb

1.37E+00

z at max.Ipi,α

1.43E+00

7.04E+00 2.04E-01

4.82E+00 2.06E-01

1.07E-01 4.82E+00 2.06E-01

2.08E-01

1.93E-01

deq(zb)

7.04E+00

fawf Dim of Aaprt td Other Information

prr pr at max. Ipi

1.11E-07 1.57E+04 3.06E+00

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

TIC

Non-scan

Aaprt> 2 1 cm

1.05E-01 3.40E+02

Control 1

Focal zone number: one , Focal position: 2.8cm for B-mode

Control 2

Sampling Volume Position: at the 2.8cm of B-mode

Control 3

Depth: 3.70cm

Control 4

Working Frequency:5.0MHz for B-mode, and 4.6MHz for PW-mode

Control 5

Scan Line Mode: lower-density line and minimum scan angle for B mode

Control 6

PRF: 15680Hz for B-mode, and 2300Hz for PW-mode, SV=0.5mm.

Highest transmission power (100%) Control 7 Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: 7L4s Imaging Mode:

Color+B-Mode/Power+B-Mode TIS

Index Label

9.37E-01 2.52E+00

pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

Non-scan

Maximum Index Value

TIB

Scan

Aaprt≤1 2 cm

Aaprt>1 2 cm

Nonscan

TIC

4.50E-01

5.23E-01

2.35E+01

[Pα(zs),

zbp zb

1.47E+00

z at max.Ipi,α deq(zb) fawf

7.12E+00

Dim Aaprt

td Other Information

prr pr at max. Ipi

1.09E-07 1.57E+04 2.90E+00

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

3.13E+02

Control 1

B-Mode Focal zone number: one ; Focal position: 2.0cm for B-mode

Control 2

Color Sampling Gate Position: at the 2.0cm of B-mode; Color Sampling Gate Width: minimum.

Control 3

Depth: 2.50 cm

Control 4

Working Frequency: 5.0MHz for B-mode, and 4.6MHz for Color-mode

Control 5

Scan Line Mode: minimum scan angle for B-mode, and lower-density line for B-mode and Color-mode, and color sensitivity : 3 .

Control 6

PRF: 15680Hz for B-mode, and 11400Hz for Color-mode

Control 7

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: 7L4s Imaging Mode:

Color+B+PW-Mode/Power+B+PW-Mode TIS

Index Label

Maximum Index Value

9.81E-01 2.60E+00

pr.a P Min of Ita,α(zs)] zs Associate Acoustic Parameter

TIB Non-scan

Scan

Aaprt≤1 cm

Aaprt> 2 1 cm

9.52E-02

5.68E-01

6.90E-01

4.68E+01

4.18E+00

5.02E+01

[Pα(zs),

zbp

1.38E+00

1.45E+00

z at max.Ipi,α

4.81E+00 2.05E-01

1.01E-01 4.81E+00 2.05E-01

1.95E-01

fawf

7.02E+00

Dim of Aaprt td prr pr at max. Ipi

9.91E-02 3.30E+02

Control 1

B mode Focal zone number : one ; Focal position: 2.8cm for B-mode

Control 2

Sampling Volume Position: at the 2.8cm of B-mode; Color Sampling Gate Position: at the 2.8cm of B-mode.

Control 3

Color Sampling Gate Width : Minimum Gate.

Control 4

Depth: 3.70cm Working Frequency : 5.0MHz for B-mode, 4.6MHz for PW-mode, and 4.6MHz for Color-mode, and color sensitivity: 3 . Scan Line Mode: Minimum scan angle for B-mode, and lower-density line for B-mode and Color-mode, SV=0.5mm. PRF: 15680Hz for B-mode, 2300Hz for PW-mode, 2300Hz for Color-mode. Acoustic Power: Highest transmission power (100%).

Control 5 Control 6 Control 7

Note 1 mode.

1.10E-07 1.57E+04 3.07E+00

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

TIC

4.74E-01

deq(zb)

Other Information

Nonscan

Control 8 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that

Acoustic Output Reporting Tables

Acoustic Output Reporting Tables Transducer Model: 6CV1s Imaging Mode: M-mode TIS Index Label

Scan

7.95E-01 1.97E+00

Maximum Index Value pr.a

TIB

Non-scan

Nonscan

TIC

7.83E-02

1.76E-01

1.10E-01

2.79E+00

Aaprt≤1cm

Aaprt> 2 1cm

Min of [Pα(zs), Ita,α(zs)] zs Associate Acoustic Parameter

zbp

1.57E+00

1.63E+00

z at max.Ipi,α

6.00E+00 2.02E-01

1.88E-01 6.00E+00 2.02E-01

6.00E+00 2.02E-01

3.23E-01

deq(zb)

6.00E+00

fawf Dim Aaprt

td Other Information

prr pr at max. Ipi

2.79E-07 1.00E+03 2.47E+00 1.82E-01

deq at max. Ipi Ipa,α at max. MI

Operating Control Conditions

2.11E+02

Control 1

Focal position: at the 2.0cm focus of B-mode

Control 2

Depth: 3.70cm

Control 3

Working Frequency: 5.0MHz

Control 4

PRF: 2000Hz

Control 5

Highest transmission power (100%)

Note 1 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode.

Previous Page Next Page