VP 7000 - Operation Manual Rev B Nov 2015



ii

VP7000_E2-30_897N120547B.indb

897N120547B

2

2016/01/15

17:24:21

Contents at a Glance Introduction Read and understand this manual fully before using this product. Chapter 1

Precautions This chapter describes the warnings and cautions for safe operation of this product.

System Configuration

Contents at a Glance

Chapter 2

This chapter describes the equipment used in combination with this product. Chapter 3

Name and Function of Each Part This chapter describes the name and function of each part of this product.

Chapter 4

System Installation and Initial Settings This chapter describes the methods of installation and initial settings of this product.

Chapter 5

Function Settings This chapter describes how to set each function of this product.

Chapter 6

Preparation and Inspection of the System This chapter describes the inspection and preparation methods to be performed for using this product.

Chapter 7

Method of Use This chapter describes a series of operations of this product.

Chapter 8

Image Recording This chapter describes how to record images.

Chapter 9

Storage and Maintenance This chapter describes the methods of storage and maintenance of this product.

Chapter 10 Troubleshooting This chapter describes actions should be taken if problems occur in this product. Chapter 11 Main Specification This chapter describes the main specification of this product.

iii

897N120547B

VP7000_E2-30_897N120547B.indb

3

2016/01/15

17:24:21

Contents

Contents Contents at a Glance... iii

Introduction

1

About This Manual...1 ♦ Operation Manuals...2 How to Read This Manual...3 ♦ Terms...3 ♦ Conventions Used in This Manual...3

Chapter 1 1.1

Precautions

1-1

Safety...1-1 ♦ Category of Equipment...1-1

1.2

1.1.1

Infection...1-2

1.1.2

Direct Harm to Human Body...1-2

Cautions/Warnings...1-3 1.2.1

Intended Use...1-3

1.2.2

Installation...1-3

1.2.3

Clinical Procedures...1-3

1.2.4

Difference of Color Tone...1-3

1.2.5

Loss of Function...1-4

1.2.6

Combination of Equipment...1-4

1.2.7

Installation of equipment...1-5

1.2.8

Transferring the equipment...1-6

1.2.9

Electric Shock...1-6

1.2.10

Explosion...1-6

1.2.11 Foreign Matter and Liquid...1-6 1.2.12 High Voltage...1-6 1.2.13 Precautions for Equipment with Built-in Laser Emission Device...1-7 1.2.14 Maintenance...1-7 1.2.15 Preparation and inspection before use...1-7 1.2.16 Temperature at distal end...1-8 1.2.17 PoP Function (Displaying Images on External Device)...1-8 1.2.18 Disposal...1-8 1.2.19 Potential equalization...1-8 1.2.20 Handling of Endoscope...1-8 1.2.21 System Version...1-8 1.2.22 Electromagnetic interference...1-9

iv

VP7000_E2-30_897N120547B.indb

897N120547B

4

2016/01/15

17:24:21

Chapter 2 2.1

System Configuration

2-1

Checking Package Components...2-1 ♦ Package Components...2-1

2.2

Equipment Using in Combination...2-2

2.3

Standard System Configuration...2-3

2.4

System Expansion...2-6

Chapter 3

Name and Function of Each Part

3-1

Front Panel...3-1

3.2

Rear Panel...3-3

3.3

Side Panel...3-5

3.4

Keyboard...3-6

3.5

Socket Protection Cap...3-9

3.6

Symbols...3-9

3.7

Data Display on the Observation Screen...3-10

3.8

Displaying FICE Set...3-19

3.9

Patient Info. + Scope Info. Dialog...3-21

Chapter 4 4.1

System Installation and Initial Settings

Contents

3.1

4-1

System Installation...4-1 4.1.1

Installation Flowchart...4-2

4.1.2

Installation onto the Cart (Standard System Installation Example)...4-3

4.1.3

Connecting the Light Source...4-9

4.1.4

Connecting the Monitor...4-10

4.1.5

Connecting the Keyboard...4-11

4.1.6

Installation for System Expansion...4-12

4.1.7

Printer Connection (Remote System)...4-15

4.1.8

Printer Connection (RS-232C System)...4-16

4.1.9

Digital Printer Connection...4-18

4.1.10 Video Recorder Connection (Remote System)...4-19 4.1.11 Connecting the Power Source...4-20 4.1.12 Power Source...4-22 4.1.13 Connecting the Power Source When Using the Cart...4-24 4.1.14 Basic Information on Power Cord...4-25 4.2

4.2.1

Flowchart of System Settings at the Time of Installation...4-26

4.2.2

Basic System Setup Operations...4-27

4.2.3

Function Tab...4-28

4.2.4

Display Tab...4-30

v

897N120547B

VP7000_E2-30_897N120547B.indb

Initial Settings at the Time of Installation...4-26

5

2016/01/15

17:24:21

Contents

4.2.5

Basic Setting Tab...4-31

4.2.6

Light Source Tab...4-33

4.2.7

Endoscope Tab...4-34

4.2.8

Setting Foot Switch (FS1)...4-47

4.2.9

Setup for Switching the Shutter Speed During Optical Zoom...4-50

4.2.10 Setting the Doctor's Name...4-51 4.2.11 Setting the Procedure Name...4-57 4.2.12 Setting the Message...4-61

Chapter 5

Hierarchical Structure of the Setting Screens ...5-1

5.2

Registering/Editing Patient Information on Processor...5-8

5.4

5.5

VP7000_E2-30_897N120547B.indb

5-1

5.1

5.3

vi

Function Settings

5.2.1

Registering Patient Information...5-8

5.2.2

Calling Up Patient Information...5-19

5.2.3

Amending Patient Information...5-21

5.2.4

Deleting Patient Information...5-23

5.2.5

Registering Patient Information Using a Magnetic Card...5-26

Setting the Panel Buttons (Image Processing Functions)...5-28 5.3.1

Basic Setup Operations...5-28

5.3.2

Structure Emphasis Settings...5-31

5.3.3

Setting FICE...5-32

5.3.4

Tone Settings...5-34

5.3.5

Color Adjustment Settings...5-35

5.3.6

Setting the Shutter Speed...5-37

5.3.7

Setting the Iris Mode...5-38

5.3.8

Special Light Observation Preset Setup...5-39

Peripheral Settings...5-41 5.4.1

Basic Setup Operations...5-41

5.4.2

Memory Tab...5-42

5.4.3

Printer Tab...5-45

5.4.4

Details Tab...5-46

Other Settings...5-48 5.5.1

Registering, Calling Up and Editing and Deleting Image Setup Page...5-48

5.5.2

Setting PoP Function...5-57

5.5.3

Index Image Display...5-58

5.5.4

Setting Freeze Mode...5-59

5.5.5

Setting Multi Zoom Mode...5-61

5.5.6

Lap Time Display...5-62

897N120547B

6

2016/01/15

17:24:21

Chapter 6

Preparation and Inspection of the System

6-1

6.1

Installing and Connecting the Equipment...6-1

6.2

Preparing Related Equipment...6-1

6.3

Operation Check of Light Source and Processor...6-2

6.4

Registering and Calling Adjustment Value...6-7

6.5

Registering the Patient Information...6-7

6.6

Calling up the Patient Information...6-8

Chapter 7

Method of Use

7-1

Preparing the Equipment...7-1

7.2

Connecting the Endoscope and Equipment...7-2

7.3

How to Use the Endoscope and Related Equipment...7-7

7.4

Supplying Power to the Equipment...7-7

7.5

Turning On the Light Source...7-8

7.6

Adjusting the Brightness...7-10

7.7

Switching Observation Mode...7-11

7.8

Turning On/Off Structure Emphasis...7-12

7.9

Turning On/Off FICE...7-13

Contents

7.1

7.10 Turning On/Off the Tone...7-14 7.11 Setting the Color Adjustment...7-15 7.12 Switching the Shutter Speed...7-16 7.13 Switching the Iris Mode...7-17 7.14 Adjusting the Electronic Zoom...7-19 7.15 Data Display Operation...7-20 7.15.1 PoP Function (Displaying Images on External Device)...7-20 7.15.2 Entering Comments...7-22 7.15.3 Starting/Stopping the Timer...7-23 7.15.4 Lap Time Function...7-24 7.16 Starting the Examination...7-26 7.17 Finishing the Examination...7-27 7.17.1 Finishing the First Examination...7-27 7.17.2 Starting the Second Examination or Later...7-28 7.17.3 Finishing All Examinations...7-29

Chapter 8

8-1

8.1

Method of Controlling the Color Printer...8-1

8.2

Printing the Image with the Color Printer (Remote System)...8-1 8.2.1

Assignment of Image Capture Switches...8-2

8.2.2

Printer Setting...8-2

vii

897N120547B

VP7000_E2-30_897N120547B.indb

Image Recording

7

2016/01/15

17:24:21

Contents

8.3

8.4

8.5

8.2.3

Capturing the Image...8-3

8.2.4

Printing the Image...8-5

Printing the Image with the Color Printer (RS-232C System)...8-6 8.3.1

Assignment of Image Capture Switches...8-7

8.3.2

Printer Setting...8-7

8.3.3

Capturing the Image...8-7

8.3.4

Printing the Image...8-9

Printing the Image with the Digital Printer...8-10 8.4.1

Assignment of Image Capture Switches...8-11

8.4.2

Printer Setting...8-11

8.4.3

Capturing the Image...8-12

8.4.4

Print Mode Setting...8-13

Recording Video Images on the Video Recorder (by Operating the Buttons)...8-14 8.5.1

8.6

8.7

8.8

8.9

Chapter 9

viii

VP7000_E2-30_897N120547B.indb

Recording Video Images by Operating the Buttons on the Video Recorder.8-14

Recording Video Images on the Video Recorder (by Operating the Scope Switch).8-16 8.6.1

Assignment of Video Recording Switches...8-16

8.6.2

Starting Video Recording...8-16

How to Record/Print Images on the Internal and External Storage Devices...8-17 8.7.1

Internal Storage Device...8-17

8.7.2

Assignment of Image Capture Switches...8-18

8.7.3

Capturing the Image to Internal Storage Device...8-19

Copying Images to External Storage Device...8-20 8.8.1

External Storage Device...8-20

8.8.2

Copying Images to an External Storage Device...8-20

8.8.3

Checking Images on a Personal Computer...8-24

How to Search and Print Images in Internal and External Storage Devices...8-26 8.9.1

Searching Images in Internal and External Devices...8-26

8.9.2

Transferring Searched Images...8-31

8.9.3

Deleting Searched Images...8-32

8.9.4

Printing Searched Images...8-34

Storage and Maintenance

9-1

9.1

Care after Use...9-1

9.2

Cleaning the Keyboard...9-2 9.2.1

Cleaning the Keyboard...9-2

9.2.2

Keyboard Cover and Replacement...9-2

9.3

Storage...9-3

9.4

Relocation...9-4

897N120547B

8

2016/01/15

17:24:21

Chapter 10 Troubleshooting

10-1

10.1 Troubleshooting...10-1 10.2 Error Messages...10-4

Chapter 11 Main Specification

11-1

11.1 Specification...11-1 ♦ Classification of Medical Electrical Equipment...11-1 ♦ Applied Part...11-1 Contents

♦ Specification...11-1 ♦ Operating Environment...11-2 ♦ Transport and Storage Environment...11-2 ♦ Term of Validity/Period for Use (Durability)...11-2 ♦ Input/Output Connector...11-2 ♦ Block Diagram...11-3 11.2 Electromagnetic Compatibility (EMC) Information...11-4 11.3 Software Used in This Product...11-8 11.4 After-Sales Service...11-9 11.5 Disposal of Electric and Electronic Equipment...11-10 11.6 Index...11-11 11.7 Service Centers...11-14

ix

897N120547B

VP7000_E2-30_897N120547B.indb

9

2016/01/15

17:24:21

Contents

x

VP7000_E2-30_897N120547B.indb

897N120547B

10

2016/01/15

17:24:21

Introduction Read and understand this manual carefully before operating the equipment.

Introduction

About This Manual This manual provides necessary information for using the VP-7000 processor, such as the operation procedures, settings and how to install the system. If you are a first-time user of this product, be sure to read this manual before actual operation. Also, after reading this manual, store it close to this product for future reference. For information on how to use the endoscope and peripherals, refer to the respective operation manuals. The peripherals include: LCD monitor, cart, printer, video recorder, ultrasonic processor and electrosurgical unit. For details of the connections of the ultrasonic processor and electrosurgical unit, refer to the respective operation manuals.

Trademarks The company names and product names described in this manual are trademarks or registered trademarks of FUJIFILM Corporation or its subsidiaries. Other holders’ trademarks All other company names and product names described in this manual are trademarks or registered trademarks of their respective owners. Copyright © 2015 FUJIFILM Corporation. All rights reserved.

1

897N120547B

VP7000_E2-30_897N120547B.indb

1

2016/01/15

17:24:21

Introduction

♦ Operation Manuals Manage and store the operation manuals related to this product together as a set.

Processor VP-7000 Operation Manual This manual provides necessary information for using the processor such as the equipment overview, operation procedures and precautions to observe.

Light Source BL-7000 Operation Manual This manual provides necessary information for using the light source such as the equipment overview, operation procedures and precautions to observe.

Note

This product is used in combination with peripherals. Refer to the operation manual of each peripheral device described in “2.2 Equipment Using in Combination”.

CAUTION • No part or all of this manual may be reproduced in any form without prior permission. • The information contained in this manual may be subject to change without prior notice. • FUJIFILM Corporation shall not be liable for malfunctions or damages caused by installation, relocation, remodeling, maintenance, and repair performed by dealers other than those specified by FUJIFILM Corporation. • FUJIFILM Corporation shall not be liable for malfunctions or damages of FUJIFILM Corporation products due to products of other manufacturers not supplied by FUJIFILM Corporation. • FUJIFILM Corporation shall not be liable for malfunctions or damages caused by remodeling, maintenance, and repair using repair parts other than those specified by FUJIFILM Corporation. • FUJIFILM Corporation shall not be liable for malfunctions or damages resulting from negligence of the precautions and operating methods contained in this manual. • FUJIFILM Corporation shall not be liable for malfunctions or damages resulting from use under environment conditions outside the range specified for this product, such as the power supply, installation environment, etc., as described in this manual. • FUJIFILM Corporation shall not be liable for malfunctions or damages resulting from natural disasters, such as fires, earthquakes, floods, lightning, etc.

• This product has heavy metal parts. When disposing of this product, comply with local laws and regulations in your area. Determine whether or not the product is to be treated as a biohazard, then handle and dispose of accordingly. • Before disposing of this product or an endoscopic accessory, perform cleaning and disinfection (or sterilization) according to the procedure described in the operation manual. There is a risk of being a source of infection.

2

VP7000_E2-30_897N120547B.indb

897N120547B

2

2016/01/15

17:24:21

How to Read This Manual ♦ Terms Term

Description It refers to disinfection or sterilization performed after the manual cleaning of the endoscope and its accessories.

This product

If refers to the processor.

Standard accessory

It refers to the parts and devices included in the package or supplied with this product.

Introduction

Reprocessing

♦ Conventions Used in This Manual This manual uses the following conventions for easier understanding. General Conventions Convention

Description

WARNING

Explains dangerous situations that may cause death or serious injury if not avoided.

CAUTION

Explains situations that may cause slight or moderate levels of injury if not avoided. Explains situations that may cause damage to equipment if not avoided.

(1), (2), (3), ...

Indicates consecutive numbers in operating procedures for the order in which successive steps in the procedure should be taken.

Note

Indicates a comment or supplementary information. Indicates a reference.

3

897N120547B

VP7000_E2-30_897N120547B.indb

3

2016/01/15

17:24:21



4

VP7000_E2-30_897N120547B.indb

897N120547B

4

2016/01/15

17:24:21

Chapter

Safety

Chapter 1 Precautions

1.1

1 Precautions

Before using this product, read this section carefully so that you can operate it correctly. Whenever you operate this product, be sure to observe those precautions. Failure to do so may cause you to subject to injuries or property damage to occur.

WARNING • The institution is responsible for the use and maintenance of this product. In addition, this product should not be used by persons other than doctors or suitably trained staff. • Be sure to prepare a spare endoscope against unexpected accidents such as the failure of this product. Otherwise, you may not be able to continue the endoscopic procedure. If the spare endoscope is not available, prepare other alternative means such as abdominal surgery. This product is intended for use by medical professionals who have received proper training in endoscopic procedures. This manual does not provide information about clinical procedures or any aspects of endoscopic techniques.

CAUTION • Do not modify this product or its components, and do not disassemble, repair or in any other way reverse-engineer these products. Even if you find a defect, do not attempt to repair these products yourself. FUJIFILM Corporation shall not be liable for any defects or device failures caused by such modifications, disassembly, repairs or reverse-engineering. If this product is disassembled or modified, it creates a risk of human injury or equipment damage, and is unable to ensure its functionality.

♦ Category of Equipment <Category of Medical Electric Equipment> 1. Type of protection against electric shock: Class I equipment (Power supply: Protective earth plug) 2. Degree of protection against electric shock: Type BF applied part 3. Degree of explosion protection: Use is prohibited in an oxygen-rich environment or in a flammable gas atmosphere. [Note] Combination with BL-7000 or LL-4450

1-1

897N120547B

VP7000_E2-30_897N120547B.indb

1

2016/01/15

17:24:21

Chapter 1 Precautions

1.1.1

Infection

WARNING • Replace the cover for a keyboard to which any bodily fluid droplet, etc., has adhered. There is a risk of infection.

1.1.2

Direct Harm to Human Body

WARNING • If any peripherals not described in “2.2 Equipment Using in Combination” are used, this product may not function properly and it may cause damage to the peripherals or injury to patients or physicians. • This product conforms to the EMC standard (EN 60601-1-2: 2007). However, the radio waves radiated form this product may cause medical devices such as a pacemaker to malfunction. When this product is used for a patient with an active implantable medical device, consult a cardiovascular specialist and the manufacturer of the active implantable medical device. • To avoid damage to eyes, do not look at the light directly while the light is turned on. Do not look directly at the light from the endoscope.

CAUTION • Do not touch the light guide prong until it has cooled down (approximately 5 minutes). Touching the light guide prong with hands immediately after use of the endoscope may cause a burn. • Set a suction pressure at 40 to 53 kPa or less. The endoscope may adhere to the mucous membrane, resulting in damage to the mucous membrane.

1-2

VP7000_E2-30_897N120547B.indb

897N120547B

2

2016/01/15

17:24:21

1.2

Cautions/Warnings

Observe the following cautions when handling this product. Also, there are same cautions in each chapter.

1.2.1

Intended Use

WARNING

Chapter 1 Precautions

• This product is intended to be used in combination with a FUJIFILM medical endoscope, light source, monitor, recorder and various peripherals for observation, diagnosis, endoscopic treatment, and image recording in medical facilities under the management of physicians. Never use this product for any other purposes.re. • Do not rely on the BLI observation mode alone. Perform comprehensive observation and diagnosis including normal observation for all target regions. Not doing so may result in improper observation and diagnosis. Information obtained from the BLI mode image should be regarded as reference information and it does not assure the validity of diagnosis.

1.2.2

Installation

WARNING • Only service personnel are allowed to install this system. No one except such personnel should install this system.

1.2.3

Clinical Procedures

WARNING • This manual assumes that the product will be used by medical specialists who have received proper training in endoscopic procedures. This manual does not provide information about clinical procedures. Proper clinical judgment should be exercised for all clinical procedures.

1.2.4

Difference of Color Tone

WARNING • When using FICE, BLI, BLI-bright or LCI, use it after sufficiently understanding the difference between the color tone and brightness of the usual viewing image and FICE, BLI, BLI-bright or LCI image. Also check the usual viewing image for diagnosis.

1-3

897N120547B

VP7000_E2-30_897N120547B.indb

3

2016/01/15

17:24:22

Chapter 1 Precautions

1.2.5

Loss of Function

CAUTION • During an examination, if the endoscopic image disappears, a live image is not displayed after freeze mode has been cancelled, or the endoscopic image is discolored, reset the processor and light source. • During treatment, if the endoscopic image disappears, a live image is not displayed after freeze mode has been cancelled, or the endoscopic image is discolored, stop treatment immediately, remove the endotherapy device from the endoscope, and then reset the processor and light source. • If an appropriate image does not appear even after resetting the processor and light source, turn them off, straighten the bending section, and then withdraw the endoscope slowly from the patient. • Should the endoscopic image disappear during an examination or treatment, and if the processor and light source are not turned off, it may cause overheating of the distal end of the endoscope, possibly resulting in mucosal burns or other injury. [Note] Reset: Turn off the processor and the light source, and wait for at least 5 seconds. Turn on the processor and the light source again, and then turn on the light by pressing the Light button. [Note] For details on how to operate the endoscope, refer to the operation manual of the endoscope.

1.2.6

Combination of Equipment

WARNING • This product is used in combination with peripherals. To avoid electric shock, do not use peripherals that are not specified in “2.2 Equipment Using in Combination”.

1-4

VP7000_E2-30_897N120547B.indb

897N120547B

4

2016/01/15

17:24:22

1.2.7

Installation of equipment

WARNING • To avoid electric shock and equipment toppling over, observe the following precautions when installing the equipment. <To avoid electric shock> • Connect the power plugs of the VP-7000 processor and BL-7000 light source or LL-4450 light source directly to the receptacles for the processor/light source on the cart.

Chapter 1 Precautions

• When both the BL-7000 light source and the LL-4450 light sources are installed, connect the power plug of the BL-7000 directly to the receptacle for the processor/light source on the cart, and connect the power plug of the LL-4450 directly to the receptacle for peripherals on the cart. • Do not take the power source for the electrosurgical unit from the cart. • Do not take the power for the second cart from the first cart. • Do not connect any unit other than the equipment composing this system to the power outlet of the cart. <To avoid toppling over of equipment> • Do not stack the peripherals. • Make sure that the feet of each unit are placed inside of the stoppers. • Make sure that the feet of each unit are placed inside of the stoppers on the movable shelf of the cart. <To avoid malfunction due to lightning> • Connect the equipment to a power source suitable for the structure and facilities of the hospital or clinic.

CAUTION • Since there are ventilation holes on the bottom surface of the light sources BL-7000 and LL-4450, take care not to cover the bottom surface with foreign substances. • When a cable is connected to the PoP connector, lay the cable so as to prevent feet or other devices from being caught. • Do not attach the electrical connector of the 500, L500, 600 or L600 system scope to the electrical connector socket of the VP-7000 with the 700 system scope inserted into the scope connector of the BL-7000. • When the 590 series scope is used, place the VP-7000 processor on the lower shelf and the BL-7000 light source on the upper shelf. Otherwise, it may cause malfunction of the endoscope.

1-5

897N120547B

VP7000_E2-30_897N120547B.indb

5

2016/01/15

17:24:22

Chapter 1 Precautions

1.2.8

Transferring the equipment

WARNING • The heavy weight of the light source may cause physical injuries when moving it. Move it using two persons.

1.2.9

Electric Shock

WARNING • Connect the power plug directly to the protective earth receptacle. Use peripherals that are compliant with the medical safety standards. Not doing so may cause an electric shock. • Do not touch the terminals on the rear panel and a patient at the same time. It may cause an electric shock.

CAUTION • Use the rated voltage only. Not doing so may cause a fire, electric shock or malfunction.

1.2.10 Explosion WARNING • Do not use the equipment in atmosphere of flammable gas and oxygen-rich environment. Doing so may cause explosion or fire.

1.2.11 Foreign Matter and Liquid WARNING • Foreign matter, water and chemicals entering the equipment may cause a fire or electric shock. In such a case, stop using the equipment immediately, disconnect the power plug from the power outlet, and consult your local FUJIFILM dealer.

1.2.12 High Voltage CAUTION • This product has high voltage portions. No one except service personnel should touch the inside.

1-6

VP7000_E2-30_897N120547B.indb

897N120547B

6

2016/01/15

17:24:22