GE Healthcare
Giraffe, Lullaby and Panda Neonatal Systems
Giraffe OmniBed Technical Bulletin Jun 2013-Metal Lift Mechanism Redesign
Technical Bulletin
5 Pages
Preview
Page 1
Rendered PDF File Page 1 of 5
DOC1396642, Rev:1
Electronic Signature Information Name
DOC1396642
Revision
1
Type
Controlled Document
Title
TB MIC 13 016
Originator
212000854_robert_m_mcguire
Release Date
10/30/2013 05:46:21 PM
Obsolete Date
Name
Reason For Change
File Size (Bytes)
Metal Lift Mechanism Redesign.doc
Metal Lift Mechanism Redesign
4521984
ElectronicSignatureInfo_Released.html
Electronic Signature HTML file
3096
Route
Function Status
Signer
Comments Completion Date
R-5600099 212061606_milorad__ljoljic
Approve
30 Oct 2013 17:28:43 GMT
R-5600099 212068143_chaitanya_n_rangnekar
Approve Reviewed
29 Oct 2013 12:44:19 GMT
R-5600099 212000854_robert_m_mcguire
Approve
30 Oct 2013 17:46:20 GMT
Periodic Review There are no signatures or routes related to this business object.
Obsolesence Approval There are no signatures or routes related to this business object.
Released
* Printed versions are For Reference Only * + Indicates a task was reassigned from an original assignee
Rendered PDF File Page 2 of 5
DOC1396642, Rev:1
GE Healthcare
Technical Bulletin Maternal Infant Care Unique Identifier: Document Archive:
TB MIC 13 016 DOC1396642
Date:
Jun 5 2013
Product Group:
Giraffe
Revision Number:
1
Affected Products:
OmniBed
Affected Parts:
See Content
Affected Service Publications:
6600-0343-000DWG
Title:
See Subject
Subject:
Metal Lift Mechanism Redesign
Tracking Number (ECO / Trackwise):
PR #9953934
Issue / Purpose For the purposes of improved reliability and reduced warranty costs, the lift mechanism for OmniBed has been changed to use a metal lift belt as apposed to the earlier design that uses a plastic lift belt. The Service Manual will be updated to include the new design in the next revision. This bulletin, in combination with the existing Illustrated Parts section of the Service Manual 6600-0343-000, provides the needed information required to identify the correct replacement part and implement needed repairs.
Technical Detail The parts listed on the following pages are no longer available with the introduction of the metal lift belt design. This is being done to assure consistency in the U-Channel Assembly there by providing the greatest possible reliability for this design. The complete metal U-Channel Assembly is shown on the last page of this document and can be ordered under part number 2074711-001
Repair Procedures
Released
As a result of this design change it is no longer necessary to perform section 5.4.3.4 “Replacing the Rail Drive Belt” in service manual 6600-0343-000. The metal lift belt design change does not affect the remaining procedures for the OmniBed lift mechanism.
This document complies with GEHC Global Quality Tech Bulletin Work Instruction GEHC_GQP_12.08.002 (DOC1256707). The information contained in this document is CONFIDENTIAL INFORMATION and IS INTENDED ONLY FOR THE USE OF EMPLOYEES OF GENERAL ELECTRIC COMPANY, IT’S SUBSIDIARIES, AFFILIATES OR DESIGNEES. Distribution or copying of this document by non-employees or non-designees is strictly prohibited without the express written consent of General Electric Company or subsidiary thereof.
Rendered PDF File Page 3 of 5
DOC1396642, Rev:1
GE Healthcare Obsolete Parts List A Item#
Released
8 9 19 20
Description Lift belt (Current revision is white)** Block adjuster Top Belt adjuster Bottom Belt guide block
Pt# 6600-1372-500 6600-1358-500 6600-1357-500 6600-1815-500
This document complies with GEHC Global Quality Tech Bulletin Work Instruction GEHC_GQP_12.08.002 (DOC1256707). The information contained in this document is CONFIDENTIAL INFORMATION and IS INTENDED ONLY FOR THE USE OF EMPLOYEES OF GENERAL ELECTRIC COMPANY, IT’S SUBSIDIARIES, AFFILIATES OR DESIGNEES. Distribution or copying of this document by non-employees or non-designees is strictly prohibited without the express written consent of General Electric Company or subsidiary thereof.
Rendered PDF File Page 4 of 5
DOC1396642, Rev:1
GE Healthcare Obsolete Parts List B
Released
Item#
Description
Pt#
2 Bottom sprocket axle
6600-1375-500
4 Slip clutch assembly
6600-0868-700
5 Top sprocket axle
6600-1374-500
6 Spacer
6600-1376-500
7 Sprocket
6600-1373-500
9 Spacer
6600-1377-500
18 Slip clutch roll pin
6600-1198-400
This document complies with GEHC Global Quality Tech Bulletin Work Instruction GEHC_GQP_12.08.002 (DOC1256707). The information contained in this document is CONFIDENTIAL INFORMATION and IS INTENDED ONLY FOR THE USE OF EMPLOYEES OF GENERAL ELECTRIC COMPANY, IT’S SUBSIDIARIES, AFFILIATES OR DESIGNEES. Distribution or copying of this document by non-employees or non-designees is strictly prohibited without the express written consent of General Electric Company or subsidiary thereof.
Rendered PDF File Page 5 of 5
DOC1396642, Rev:1
GE Healthcare Metal Lift Belt U-Channel Assembly
The Metal Lift Belt U-Channel Assembly 2074711-001 replaces the need to replace piece parts within the assembly when making this repair. Doing so reduces Mean Time to Repair (MTTR), improves product reliability and eliminates potential assembly errors in the field. The piece parts listed earlier in this document have been replaced by this single High Level Assembly shown below.
Released
2074711-001
When unpackaging the U-Channel Assembly be sure to remove the two tie wraps (not shown) that hold the bouency springs/spools in place during shipping.
This document complies with GEHC Global Quality Tech Bulletin Work Instruction GEHC_GQP_12.08.002 (DOC1256707). The information contained in this document is CONFIDENTIAL INFORMATION and IS INTENDED ONLY FOR THE USE OF EMPLOYEES OF GENERAL ELECTRIC COMPANY, IT’S SUBSIDIARIES, AFFILIATES OR DESIGNEES. Distribution or copying of this document by non-employees or non-designees is strictly prohibited without the express written consent of General Electric Company or subsidiary thereof.