Hill-Rom

VOLKER Beds

Model 5380 Series Brief Instructions - Side rails and Caregivers console

Brief Instructions

2 Pages

Brief instructions for low height bed model 5380 / 5380 K A. Side rails To raise a side rail section, pull section horizontally out of its location to end-stop and fold it upwards. In order to adjust the height of the side rail, pull the telescopic part up to the stop. To lower a side rail section completely, 1. Press the two buttons on the inner side of the frame, right above the cross-member, so that the height-adjustable side rail section can be put into its lowest position. 2. Operate the (2a) release button labelled “Push” at the bottom of the side rail part and (2b) tilt it horizontally to the side so that it runs parallel to the floor. 3. Push the side rail completely under the lying surface.  1  2 (a)  2 (b)  3  B. Hand control back section up  back section down  upper leg section up  upper leg section down  Height adjustment up  Height adjustment down  ComfortComfort-button (Anti-Trendelenburg position) Activate / Deactivate  Völker AG • Wullener Feld 79 • 58454 Witten - Germany Telefon +49 2302 960 960 • Telefax +49 2302 960 96 16 www.voelker.de • service@voelker.de KA48
File Type: PDF
File Size: 282 KB
File Name: model_5380_series_brief_instructions_-_side_rails-c.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions